@database napsaterm.guide
@Master napsaterm.texi
@Width 72
This is the AmigaGuide® file napsaterm.guide, produced by Makeinfo-1.55 from
the input file napsaterm.texi.
Copyright © 1994 AmiTCP/IP Group, Network Solutions Development
Inc., Finland.
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided that
the entire resulting derived work is distributed under the terms of a
permission notice identical to this one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a
translation approved by the copyright holders.
@Node Main "napsaterm.guide"
@Next "About"
Napsaterm 3
***********
Napsaterm is a VT100 terminal emulator and rlogin client for
AmiTCP/IP.
This is edition 1.3.2 of the Napsaterm documentation, 30 May 1994,
for Napsaterm version 3.9.
@{" About " Link "About"} Authors, copying
@{" Invoking from Shell " Link "Invoking from Shell"} How to start Napsaterm from command line
@{" Invoking from Workbench " Link "Invoking from Workbench"} How to start Napsaterm from Workbench
@{" Options " Link "Options"} Configuring Napsaterm
@{" Menus " Link "Menus"} Using menus
@{" Fonts " Link "Fonts"} How Napsaterm uses fonts
@{" National " Link "National"} Using different character sets and keymaps
@{" IO modes " Link "IO modes"} Using Napsaterm with AmiTCP, DNet etc.
@{" Tektronix emulation " Link "Tektronix emulation"} Tektronix tek4010 emulation window
@{" History " Link "History"} Changes from previous versions
@{" Glossary " Link "Glossary"} Important concepts
@{" Index " Link "Index"}
-- The Detailed Node Listing --
About Authors
@{" Copying Napsaterm " Link "Copying Napsaterm"} Your rights
@{" Niftyterm licence " Link "Niftyterm licence"} Original licence
Options
@{" General options " Link "General options"}
@{" Device options " Link "Device options"} Using different interfaces.
@{" Emulation options " Link "Emulation options"} Changing the emulation type.
@{" Display options " Link "Display options"} Changing the *Napsaterm* window.
@{" Host names " Link "Host names"} Selecting remote host.
@{" Preference file " Link "Preference file"} Setting default preferences
Using Menus
@{" Command menu " Link "Command menu"}
@{" Edit menu " Link "Edit menu"}
@{" Setup menu " Link "Setup menu"}
National Modes
@{" Keymaps " Link "Keymaps"} Default national keymaps
@{" Character tables " Link "Character tables"} National character tables
Using Different IO Modes
@{" rlogin protocol " Link "rlogin protocol"}
@{" Telnet protocol " Link "Telnet protocol"}
@{" Serial device " Link "Serial device"}
@{" DNet " Link "DNet"}
@{" DOS IO " Link "DOS IO"}
Napsaterm History
@{" Changes in Version 3 " Link "Changes in Version 3"}
@{" Changes in Version 2 " Link "Changes in Version 2"}
@{" Changes in Version 1 " Link "Changes in Version 1"}
@EndNode
@Node "About" "napsaterm.guide/About"
@Next "Invoking from Shell"
@Prev "Main"
@Toc "Main"
About Authors
=============
Napsaterm is © copyright 1991, 1993, 1994 Pekka Pessi and AmiTCP/IP
Group. Our e-mail address is `<AmiTCP-Group@hut.fi>'. You can reach
us by mail with address
AmiTCP/IP Group
c/o Pekka Pessi
Jämeräntaival 11E122
FI-02150 Espoo
Finland, Europe
Members of the AmiTCP/IP Group and their e-mail addresses are
Tomi Ollila, `<Tomi.Ollila@hut.fi>'
Pekka Pessi, `<Pekka.Pessi@hut.fi>'
Markus Peuhkuri, `<Markus.Peuhkuri@hut.fi>'
Jarno Rajahalme, `<Jarno.Rajahalme@hut.fi>'
We are interested to continuously develop Napsaterm and AmiTCP/IP.
If you improve Napsaterm or fix bugs, please send the changes to us.
The @{"Tektronix emulation" Link "Tektronix emulation"} is written by Robert A. Knop,
`<rknop@cco.caltech.edu>'. He has also written some new features and
bug fixes to VT100 emulation.
@{" Copying Napsaterm " Link "Copying Napsaterm"} Your rights
@{" Niftyterm licence " Link "Niftyterm licence"} Original licence
@EndNode
@Node "Copying Napsaterm" "napsaterm.guide/Copying Napsaterm"
@Next "Niftyterm licence"
@Toc "About"
Copying Napsaterm
-----------------
Napsaterm is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.
Napsaterm is distributed in the hope that it will be useful, but
*without any warranty*; without even the implied warranty of
*merchantability* or *fitness for a particular purpose*. See
@{"the GNU General Public License" Link "AmiTCP:COPYING/main"}, for more details.
You should have received a copy of the GNU General Public License
along with Napsaterm or with AmiTCP/IP; see the file `COPYING'. If not,
please contact the authors.
@EndNode
@Node "Niftyterm licence" "napsaterm.guide/Niftyterm licence"
@Prev "Copying Napsaterm"
@Toc "About"
Niftyterm Licence
-----------------
Niftyterm is © copyright 1989, 1990 Christopher J. Newman and Todd
Williamson
All Rights Reserved.
Permission to use, copy, modify, distribute, and sell this software
and its documentation for any purpose is hereby granted without fee,
provided that the above copyright notices appear in all copies and that
both that copyright notices and this permission notice appear in
supporting documentation, and that the names of Christopher J. Newman
and Todd Williamson not be used in advertising or publicity pertaining
to distribution of the software without specific, written prior
permission. Christopher J. Newman and Todd Williamson make no
representations about the suitability of this software for any purpose.
It is provided "as is" without express or implied warranty.
CHRISTOPHER J. NEWMAN AND TODD WILLIAMSON DISCLAIM ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL CHRISTOPHER J. NEWMAN OR
TODD WILLIAMSON BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
THIS SOFTWARE.
Authors: Christopher J. Newman and Todd Williamson
Niftyterm source code is available upon request. Send a disk and a
self-addressed mailer to the address below, and I'll send you a copy.
If you find this program useful, Chris and I would certainly
appreciate a donation to support further development:
Todd Williamson
5440 Fifth Avenue Apt. 59
Pittsburgh, Pa. 15232-2243
@EndNode
@Node "Invoking from Shell" "napsaterm.guide/Invoking from Shell"
@Next "Invoking from Workbench"
@Prev "About"
@Toc "Main"
Invoking Napsaterm from Shell
=============================
You can start Napsaterm with following command line options and
parameters:
NAPSATERM [-V] [--vt102] [--vt52] [--h19] [-7] [-l FILE] [--slow]
[-g GEOMETRY] [--80] [-f FONTNAME] [-p PROGRAMTITLE] [-S SCREEN]
[--ic] [-v] [--application] [--numeric] [-w]
[-d DEVICE] [-u UNIT] [-B LINESPEED] [--shared] [--stdio]
[-N NET] [-s SERVICE] [-r REMOTENAME] [HOST]
Command line options can be entered in any order and any combination
(except those that override each other). Single character options begin
with single hyphen and can have optional arguments, multicharacter
options begin with double hyphen. The rest of the command line
arguments are interpreted as host names. With @{"Preference file" Link "Preference file"} you can
change the default preferences of Napsaterm.
@EndNode
@Node "Invoking from Workbench" "napsaterm.guide/Invoking from Workbench"
@Next "Options"
@Prev "Invoking from Shell"
@Toc "Main"
Invoking Napsaterm from Workbench
=================================
You can start Napsaterm from Workbench with various tool types to
accommodate your personal preferences.
If you are using a project icon with Napsaterm as tool, the
tooltypes of the project icon will override the tool types of the tool
icon.
WAITTOEND
LOGFILE=filename
DEVICE=name
UNIT=number
LINESPEED=number
SHARED
REMOTENAME=login name
REMOTETYPE=terminal type
SERVICE=service type
EMULATION=terminal type
NATIONAL=mode
NATION=Nation name
KEYMAP=[nation/]mapname
KEYBOARD=[nation/]mapname
KEYPAD=NUMERIC|APPLICATION
MOUSE=events
BACKSPACE2DELETE
DELETE2BACKSPACE
CURSORBLINK
CURSOR=type
BELL=type
PASS8
CTRL8BIT
INVERSE
ALTISMETA
GEOMETRY=specification
PUBSCREENNAME=name
BASEFONT=font/size
TITLE=string
SIZEGADGET=type
FIXEDCOLUMNS
HOST=hostname
@EndNode
@Node "Options" "napsaterm.guide/Options"
@Next "Menus"
@Prev "Invoking from Workbench"
@Toc "Main"
Options
=======
The Napsaterm can be given either command line options or icon tool
types.
@{" General options " Link "General options"}
@{" Device options " Link "Device options"} Using different interfaces.
@{" Emulation options " Link "Emulation options"} Changing the emulation type.
@{" Display options " Link "Display options"} Changing the Napsaterm window.
@{" Host names " Link "Host names"} Selecting remote host.
@{" Preference file " Link "Preference file"} Setting default preferences
@EndNode
@Node "General options" "napsaterm.guide/General options"
@Next "Device options"
@Prev "Options"
@Toc "Options"
General Options
---------------
`-V'
Displays the current version number and copyright notice. There is
no corresponding tool type.
`-l FILE'
`LOGFILE=FILENAME'
Logs the terminal output into specified file.
`-w'
`WAITTOEND'
Wait for a keypress before closing the emulation window after the
input stream has finished.
`WAITTOEND=NOT'
Negative form of previous tool type.
@EndNode
@Node "Device options" "napsaterm.guide/Device options"
@Next "Emulation options"
@Prev "General options"
@Toc "Options"
Device Options
--------------
`-d DEVICE'
`DEVICE=NAME'
Uses specified device. The DEVICE may be any device compatible
with serial.device (normal Exec device name) or one of the
following:
* NET - use the remote login protocol over TCP/IP (default).
* TELNET - use the Telnet protocol over TCP/IP.
* DNET - use a "DNet" channel.
`-u UNIT'
`UNIT=NUMBER'
causes Napsaterm to use the specified unit of the device. It has no
effect when using TCP/IP or DNet.
`-N NETWORK'
Uses the specified DNet NETWORK. This option is not currently
implemented.
There is no corresponding tool type.
`-B LINESPEED'
`LINESPEED=NUMBER'
Starts the Napsaterm with specified LINE SPEED (as bits per
second). This parameter is used with `serial.device' and
@{"rlogin protocol" Link "rlogin protocol"}.
`--shared'
`SHARED'
If this option is specified, Napsaterm will open the device
specified in "shared" mode. This allows Napsaterm to share the
serial port with other applications which also can open the serial
port in shared mode (including another Napsaterm). You can also
prevent Napsaterm from reading characters from serial device, see
@{"Unlisten menu command" Link "Command menu"}.
`--stdio'
Causes Napsaterm to display whatever comes from standard input, and
send all keystrokes to standard output. For example:
Napsaterm --stdio < filein > fileout
would display file in a Napsaterm window.
There is no corresponding tool type.
`-r LOGIN NAME'
`REMOTENAME=LOGIN NAME'
This option or tool type is used to specify user name in the remote
system when using the @{"rlogin protocol" Link "rlogin protocol"}.
`REMOTETYPE=TERMINAL TYPE'
This tool type specifies the terminal type used in the remote
system when using the @{"rlogin protocol" Link "rlogin protocol"}.
`-s SERVICE'
`SERVICE=SERVICE'
causes Napsaterm to use the specified TCP service or port number.
You can either give a service name from `AmiTCP:db/services' or the
directly the port port number.
This option or tool type is valid only with telnet protocol.
@EndNode
@Node "Emulation options" "napsaterm.guide/Emulation options"
@Next "Display options"
@Prev "Device options"
@Toc "Options"
Emulation Options
-----------------
`EMULATION=TERMINAL TYPE'
Select the emulation type to use. The emulation type can be chosen
with following options from the command line.
`--vt102'
Emulate a "vt102" terminal.
`--vt52'
Emulate a "vt52" terminal.
`--h19'
Emulates a "ht19" terminal.
`NATIONAL=MODE'
Determines the national mode used. National modes are (valid
abbreviation for each mode in parenthesis):
* `None' (`No')
* `Multinational' (`Mu')
* `National' (`Na')
See @{"National modes" Link "National"}.
`NATION=NATION NAME'
Specifies the used nation. Valid nations are as follows (valid
abbrevations for each nation in parenthesis):
* `US ASCII', (`US')
* `Danish', (`Da')
* `Finnish', (`Fi')
* `French', (`Fr')
* `German', (`Ge')
* `Norwegian', (`No')
* `Swedish', (`Sw')
* `UK ASCII', (`UK')
Default nation is `US'.
`KEYMAP=[NATION/]MAPNAME'
`KEYBOARD=[NATION/]MAPNAME'
These tool types are synonymous. They specify the keymap the
Napsaterm will use. It is possible to change also a specific
national keymap, for instance the tool type `KEYMAP=Finnish/sf7'
will change the Finnish national keymap to `sf7'. For default
national keymaps, see @{"Keymaps" Link "Keymaps"}.
`KEYPAD=[NUMERIC/APPLICATION]'
`--numeric'
`--application'
These options and tool type control the behauvior of keypad. If
the option `--numeric' is specified or the tool type `KEYPAD' has
value `NUMERIC', the keypad is in normal mode. If the option
`--application' is specified or the tool type `KEYPAD' has value
`APPLICATION', the keypad is in the application mode.
In application mode, the vt100 control sequencies will be sent to
remote host instead of normal characters. This is handy for text
editors and the like that use the keypad as a function keypad.
`--slow'
Starts in slow mode. This mode is useful only watching some vt102
animations with `--stdio' option.
There is no corresponding tool type.
`MOUSE=EVENTS'
This tool type controls which kind of mouse events are sent to the
remote end.
OFF
Don't send mouse clicks
DOWN
Send an event only when user presses the select button
UP
Send a mouse event only when user releases the select button
BOTH
Send both up- and downward clicks
When mouse events are enabled Napsaterm sends the following
sequence when the user presses the left (selection) button on the
Amiga mouse:
ESC `M' QUALS COLUMN LINE
where column and line are bytes that represent the x, y
coordinates of the mouse click (offset by 32; a click on (0, 0)
results in sending two space characters), and quals is like so:
bit 0
Control key
bit 1
Shift key
bit 2
Meta (alt) key
bit 3
Caps lock
bit 4
Mouse down event
bit 5
Mouse up event
bit 6
Always on (making qual a printable value)
For example, clicking on column 1, row 1 results in the escape
sequence
ESC `M' `P' SPC SPC
`BACKSPACE2DELETE'
This switch tool type causes the backspace key mapped to Delete.
`DELETE2BACKSPACE'
This switch tool type causes the Delete key mapped to Backspace.
`CURSORBLINK'
By default, Napsaterm has a solid cursor. Setting this tool type
will cause cursor to blink at the rate of once per second.
`CURSOR=TYPE'
Available cursor types are `Invisible', `Underlined' and `Block'.
`--ic'
This option causes Napsaterm to start up with an invisible cursor.
`BELL=TYPE'
Available bell types are `Visual', `Audio', `Both', `None' and
`Display'. The visual bell flashes the Napsaterm window, audio
bell plays a simple beep with `audio.device'. Both of them can be
used at the same time. The display bell uses Intuition function
`DisplayBeep()'.
`PASS8'
Prevents Napsaterm from stripping off the 8th bit of the input
stream character. This is the default mode.
`-7'
`PASS8=NOT'
Causes Napsaterm to strip off the 8th bit of the incoming
characters. This is useful, if the input may contain 7 bit
characters with parity enabled.
`CTRL8BIT'
Prevents Napsaterm from converting the 8-bit control codes to
escape sequences. Normally, Napsaterm converts any 8-bit control
character (ie. ASCII codes from 128 to 159) to a two character
escape sequence. The escape sequences consist of a ESC code and
original control character code minus 64. For example, CSI (ASCII
code 155) will be converted to escape sequence ESC [, the ASCII
code of [ is 91, 155 - 64.
`CTRL8BIT=NOT'
Causes Napsaterm to convert the 8bit control codes to escape
sequences.
`-v'
`INVERSE'
Starts up with an inverted window. This may be controlled by
terminal codes when emulating a VT102 terminal. See also
@{"Setup menu" Link "Setup menu"}.
`ALTISMETA'
If this tool type is given, the left alt key on the keyboard will
act as a meta key. If the left alt key is pressed down, all single
character key sequences will be prefixed by ESC character. This is
particularly useful for emacs.
@EndNode
@Node "Display options" "napsaterm.guide/Display options"
@Next "Host names"
@Prev "Emulation options"
@Toc "Options"
Display Options
---------------
These preferences or tool types affect the Napsaterm window, its
size, placement and title.
`-g GEOMETRY'
`GEOMETRY=SPECIFICATION'
Sets up the window geometry. The format for geometry is
/LEFT/TOP/WIDTH/HEIGHT. A value of -1 for the WIDTH or HEIGHT
makes the window stretch to the right edge or bottom of the
screen. A value of -1 for the TOP makes the window's top edge
appear just below the screen title bar. The LEFT and TOP are
specified in pixels. The WIDTH and HEIGHT are specified in
characters.
`-S SCREEN'
`PUBSCREENNAME=NAME'
Opens the Napsaterm window on the specified "public screen". If the
screen don't exist, open the window on the default public screen
(which is normally the Workbench Screen).
`-f FONTNAME'
`BASEFONT=FONT/SIZE'
Sets the font for the Napsaterm window. By default the font `napsa
11' or, if `napsa 11' cannot be found, `topaz 8' is used. If you
wish to use a different font such as "courier 11", simply specify
FONT as `courier/11'. If the font you choose is not fixed width,
strange and unusual things will happen. For more information of
Napsaterm fonts see @{"Fonts" Link "Fonts"}.
`-p PROGRAMTITLE'
`TITLE=STRING'
Draws the PROGRAM TITLE with given text. The actual window title is
concatenated with display size indicator `(width × height)'.
Normal title is the remote host name when using rlogin, otherwise
`Napsaterm'.
`SIZEGADGET=TYPE'
This tool type controls which border of the window the window's
sizing gadget will appear in. If you have a sizing gadget on a
window, you must lose some of the window space for the border to
contain it. This preference controls whether you lose rows,
columns, or nothing. If you choose NONE, the window will not have
a size gadget, and will therefore not be resizeable. It is useful
if you want an 80x24 window to take up the smallest possible
screen space. If you choose COLUMN, the sizing gadget will be on
the right border, and if ROW, the sizing gadget will be on the
bottom border.
`--80'
`FIXEDCOLUMNS'
If this option or tool type is given Napsaterm won't use no more
than 80 columns of text. This is useful for running programs
written for terminals that assume the terminal has 80 columns.
@EndNode
@Node "Host names" "napsaterm.guide/Host names"
@Next "Preference file"
@Prev "Display options"
@Toc "Options"
Host Names
----------
`HOST=NAME[|NAME2...]'
The tool type HOST is used to specify remote host name(s). The host
names should be given in standard internet format.
When Napsaterm is started from command line, command line arguments
which do not start with hyphen are regarded as host names. If you need
to use host name which begins with hyphen `-', give a single hyphen as
an argument after all options and before the host name.
Napsaterm -d net - -weird.host.name.in.net
If Napsaterm is given multiple host names, it will randomly connect
to one of them.
The following command causes Napsaterm connect to either `punkku' or
`vinkku':
run Napsaterm -g 0/-1/80/30 punkku vinkku
@EndNode
@Node "Preference file" "napsaterm.guide/Preference file"
@Prev "Host names"
@Toc "Options"
Preference File
---------------
The preference file `AmiTCP:db/NapsaPrefs' contains default
preferences when you invoke Napsaterm from CLI.
The preference file contains tool-type-like options given in a
X-resource-look-a-like format. The preference file format is compatible
with NiftyTerm and older Napsaterm versions. Each row in the preference
file has format as follows:
[COMMAND NAME`.']PREFERENCE NAME`:' VALUE
"Preference name" is the part of the line before the `:' character,
"preference value" is the part after it.
Unless otherwise specified, preference name and value are
case-insensitive. Unregocnized preference names are ignored,
unrecognized values revert to default.
If the corresponding tool type is a switch, the preference value
should be `1', `true' or `yes', or the preference is silently ignored.
Tool type `Host' has no corresponding preference.
See @{"Alternative command names" Link "Alternative command names"}, if you need many different default
preference sets.
For compatibility reasons, if the file `AmiTCP:db/NapsaPrefs' does
not exist, also the files `S:NapsaPrefs' and `S:NiftyPrefs' are
searched for preferences.
@EndNode
@Node "Alternative command names" "napsaterm.guide/Alternative command names"
@Toc "Preference file"
Using Alternative Command Names
...............................
If the preference name is prefixed with COMMAND NAME, it is valid
only when Napsaterm is invoked with that name. You can invoke Napsaterm
with a different name, if you rename the Napsaterm program file or make
a new link to it. For example, you could make following links
makelink AmiTCP:bin/NapsatermUS AmiTCP:bin/Napsaterm
makelink AmiTCP:bin/NapsatermUK AmiTCP:bin/Napsaterm
and you have added following preferences
Nation: Finnish
Napsaterm.Nation: US
NapsatermUK.Nation: UK
If you started Napsaterm with the command `Napsaterm', you could use
Finnish keyboard (`s') and character set (ISO 646 SF-2). If you gave
command `NapsatermUK', you would get the British keyboard (`uk') and
character set (UK-ASCII).
@EndNode
@Node "Menus" "napsaterm.guide/Menus"
@Next "Fonts"
@Prev "Options"
@Toc "Main"
Using Menus
===========
Napsaterm have three menus, `Command', `Edit' and `Setup'. The
`Command' menu contains terminal control commands. The `Edit' menu
handles the clipboard. The `Setup' menu allows the user to adjust the
way Napsaterm functions.
@{" Command menu " Link "Command menu"}
@{" Edit menu " Link "Edit menu"}
@{" Setup menu " Link "Setup menu"}
@EndNode
@Node "Command menu" "napsaterm.guide/Command menu"
@Next "Edit menu"
@Prev "Menus"
@Toc "Menus"
Command Menu
------------
The `Command' menu contains terminal control commands.
- Menu item: Clear Screen
Moves the current Napsaterm prompt to the top of the Napsaterm
window and clears the screen. Shortcut is `Amiga-S'.
- Menu item: To Tek4010
Selects the Tek4010 emulation and activates the Tek4010 window.
Shortcut is `Amiga-G'.
- Menu item: To VT102
Selects the VT102 emulation and activates the VT102 window.
Shortcut is `Amiga-T'.
- Menu item: Soft Reset
Resets all terminal styles, scroll regions, and invert mode.
Shortcut is `Amiga-R'.
- Menu item: Flush
Flushes the buffers for the current device. Useful if you did
something that will cause a lot of output, and you want to tell
Napsaterm not to display it all. Shortcut is `Amiga-F'.
- Menu item: Break
Sends a break signal to the current device. Shortcut is `Amiga-B'.
Break is enabled only when Napsaterm is connected to a serial
device.
- Menu item: Unlisten
Napsaterm will cease to talk to whatever device it is connected
to, so that another program can use it exclusively. Note that all
keyboard input is flushed as well until you select Listen menu
option.
`Unlisten' is enabled only when Napsaterm is started in `Shared'
mode. Shortcut is `Amiga-U'.
- Menu item: Listen
Napsaterm restarts talking and listening to device it is connected
to.
`Listen' is enabled after `Unlisten' is selected.
An example of usage for `UnListen' and `Listen': you're logged in
and you want to save something to a log file. You had foresight
and started Napsaterm in shared mode. You select `Unlisten' and
start another Napsaterm writing to a log file. When you have
everything in the log file, you quit the second Napsaterm and
select `listen' the original. This option might be useful if
someone wants to write some stand-alone file transfer utilities.
Shortcut is `Amiga-L'.
- Menu item: Quit
Exits Napsaterm and closes the window. Shortcut is `Amiga-Q'.
@EndNode
@Node "Edit menu" "napsaterm.guide/Edit menu"
@Next "Setup menu"
@Prev "Command menu"
@Toc "Menus"
Edit Menu
---------
The `Edit' menu handles the clipboard.
- Menu item: Copy
Copies the selected text into the clipboard. You can put the text
you copied most recently back into any document by choosing
`Paste'. Shortcut is `Amiga-C'.
- Menu item: Paste
Copies the most recently copied text to the current cursor
position. Shortcut is `Amiga-P'.
- Menu item: Move
If a previous command or some text is selected in the Napsaterm
window, `Move' inserts the text as if it had been typed. Shortcut
is `Amiga-M'.
- Menu item: Execute
The same as `Move', only it follows the text with a `LF'
character. Shortcut is `Amiga-E'.
@EndNode
@Node "Setup menu" "napsaterm.guide/Setup menu"
@Prev "Edit menu"
@Toc "Menus"
Setup Menu
----------
The `Setup' menu allows the user to adjust the way *Napsaterm*
functions.
- Menu item: National Mode
See @{"Tool type NATIONAL" Link "Emulation options"}.
- Menu item: Nation
See @{"Tool type NATION" Link "Emulation options"}.
- Menu item: Terminal Type
See @{"Tool type EMULATION" Link "Emulation options"}.
- Menu item: Backspace is sent as
See @{"Tool type BACKSPACE2DELETE" Link "Emulation options"}.
- Menu item: Del is sent as
See @{"Tool type DELETE2BACKSPACE" Link "Emulation options"}.
- Menu item: Left Alt key is
See @{"Tool type ALTISMETA" Link "Emulation options"}.
- Menu item: Keypad
See @{"Tool type KEYPAD" Link "Emulation options"}.
- Menu item: Mouse Events
See @{"Tool type MOUSE" Link "Emulation options"}.
- Menu item: Control Codes
See @{"Tool type CTRL8BIT" Link "Emulation options"}.
- Menu item: Cursor
See @{"Tool type CURSOR" Link "Emulation options"}.
- Menu item: Display Width
See @{"Tool type FIXEDCOLUMNS" Link "Display options"}.
- Menu item: Display Speed
See @{"Option -slow" Link "Display options"}.
- Menu item: Bell Type
See @{"Tool type BELL" Link "Emulation options"}.
- Menu item: Reverse
See @{"Tool type INVERSE" Link "Emulation options"}.
- Menu item: Ansi LNM
Controls whether RETURN should be sent as CR-LF sequence.
@EndNode
@Node "Fonts" "napsaterm.guide/Fonts"
@Next "National"
@Prev "Menus"
@Toc "Main"
How Napsaterm Uses Fonts
========================
Napsaterm should be able to use any fixed-width font. However,
standard Amiga fonts do not represent the VT100's character set very
well. Included with this Napsaterm is a set of fonts with names
starting with `Napsa'. Some explanation of these fonts is in order.
Napsaterm starts out with a base font name, something like `topaz'
or `Napsa'. If Napsaterm needs an italic or bold font, it first looks
in the fonts: directory to see if there is a version of the current
font which was designed to be italic or bold. If not, it uses the
Amiga's internal functions to construct one. When it needs one of the
special VT100 character sets, it appends an extension to the font name
and looks for a font of the same size as the current font with the new
name. The extensions are as follows:
`v'
alternate character set
`w'
double-width font
`t'
top half of double-width double-height font
`b'
bottom half of double-width double-height font
`vw', `vt', and `vb' are also extensions, meaning the alternate
character set version of the different-sized font. So, for example, if
Napsaterm was using the font `Napsa/11', and it needed a double-width
font, it would look for the font `Napsaw/11'.
The fonts that come with the distribution are designed to be used on
screens where the pixels are roughly as wide as they are tall. Any of
the 640×400 graphics modes fall into this category. In the 640×200
modes, the fonts will seem too tall.
If anyone creates any fonts for use with Napsaterm or Niftyterm, I'd
like to get a copy of them.
@EndNode
@Node "National" "napsaterm.guide/National"
@Next "IO modes"
@Prev "Fonts"
@Toc "Main"
National Modes
==============
The national mode is set with tool type `NATIONAL' There are three
different national modes in Napsaterm.
None
By default, when no national mode in not in use, (`None',
abbreviated as `NO'), Napsaterm uses the ISO-8857 Latin 1 character
set, the standard character set used in Amiga. By default,
Napsaterm uses either the default system keymap or the keymap
specified with tool type `KEYMAP', if any.
Multinational
In the `Multinational' mode (abbreviated as `MU') Napsaterm uses
the Latin 1 character set and the appropriate national keymap. See
@{"Keymaps" Link "Keymaps"} for a list of default national keymap names. A specific
national keymap can also be specified with tool type `KEYMAP' or
`KEYBOARD'.
National
In the `National' mode (abbreviated as `NA') Napsaterm uses the
appropriate national 7 bit character set and the national keymap.
See @{"Character tables" Link "Character tables"} for tables of national character sets.
@{" Keymaps " Link "Keymaps"} Default national keymaps
@{" Character tables " Link "Character tables"} National character tables
@EndNode
@Node "Keymaps" "napsaterm.guide/Keymaps"
@Next "Character tables"
@Prev "National"
@Toc "National"
National Keymaps
----------------
Default national keymaps are as follows:
* `US ASCII' uses (`usa1')
* `Danish', (`dk')
* `Finnish', (`s')
* `French', (`f')
* `German', (`d')
* `Norwegian', (`n')
* `Swedish', (`s')
* `UK ASCII', (`gb')
You can change national keymap with tool type
`KEYMAP'=NATION/KEYMAPNAME, for example
KEYMAP=Finnish/s-term
changes the Finnish keymap to `s-term'. You can abbreviate the
nation name, see also @{"tool type NATION" Link "Emulation options"}.
@EndNode
@Node "Character tables" "napsaterm.guide/Character tables"
@Prev "Keymaps"
@Toc "National"
National Character Tables
-------------------------
Napsaterm uses ISO 646 national character codes as follows:
DEC 35 36 64 91 92 93 94 96 123 124 125 126
=========================================================
US-ASCII # $ @ [ \ ] ^ ` { | } ~
Danish # $ @ Æ Ø Å ^ ` æ ø å ~
Finnish # $ @ Ä Ö Å ^ ` ä ö å ~
French # $ à ° ç § ^ ` é ù è ¨
German # $ § Ä Ö Ü ^ ` ä ö ü ß
Norwegian # ¤ É Æ Ø Å Ü é æ ø å ü
Swedish # ¤ É Ä Ö Å Ü é ä ö å ü
UK-ASCII £ $ @ [ \ ] ^ ` { | } ~
=========================================================
HEX 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E
@EndNode
@Node "IO modes" "napsaterm.guide/IO modes"
@Next "Tektronix emulation"
@Prev "National"
@Toc "Main"
Using Different IO Modes
========================
Napsaterm provides four different ways to do the terminal IO.
@{" rlogin protocol " Link "rlogin protocol"}
@{" Telnet protocol " Link "Telnet protocol"}
@{" Serial device " Link "Serial device"}
@{" DNet " Link "DNet"}
@{" DOS IO " Link "DOS IO"}
@EndNode
@Node "rlogin protocol" "napsaterm.guide/rlogin protocol"
@Next "Telnet protocol"
@Toc "IO modes"
Rlogin protocol
---------------
The rlogin protocol is described in the `RFC 1282'. It is a
Unix-specific remote terminal session protocol, somewhat like
@{"Telnet protocol" Link "Telnet protocol"} but with different features. The remote rlogin session
get your the user name, terminal type and line speed from the rlogin
client.
Rlogin protocol uses your local hostname (domain name of the computer
you are logging from), your local user name and user name at the
"rlogin server" for authentication. If there is a matching entry in the
`rhosts' files, the rlogin server let you log in without asking the
password. If no match is found, rlogin server asks you for the password
for the remote user. If it is not correct, it reverts to normal login
procedure.
Napsaterm is used as a rlogin client for AmiTCP/IP. Currently
Napsaterm gets the local user name from environment variable `USER'.
The remote user name is same as your local user name unless you specify
tool type `RemoteName'.
For example, your local user name is `ppessi', but remote user name
is `t35082k'. If not told otherwise, Napsaterm will introduce your as
`ppessi' to the remote machine. As the rlogin server regards it as the
password of account of `ppessi', you can not give your password at the
first `Password:' prompt. You should use tool type `RemoteName':
RemoteName=t35082k
Now you can enter password for `t35082k''s account without typing
the user name each time. You can also specify your remote user name
with `-r' option.
You should add an entry to your `.rhosts' file in a Unix machine
only if your Amiga is trustworthy -- that is, nobody else but you can
use it and it is in secure network. A `.rhosts' entry consists of a
host name and a user name in that host. The host name is the canonic
host name of machine you are logging from. For example, if you have
account `t35082k' in machine called `kaira.hut.fi', you could add
following line to your `.rhosts' file:
kaira.hut.fi t35082k
The line speed has additional meaning when using rlogin protocol.
Some Unix programs and terminal drivers use the nominal terminal speed
to determine the throughput of your connection. There may be a problem
if the speed is 300 b/s (or even 9600 b/s) while you are using Ethernet.
Likewise the nominal speed of 38400 b/s over a 2400 b/s slip connection
is likely to cause trouble. You can determine your nominal speed in the
Unix systems with the `stty' command.
@EndNode
@Node "Telnet protocol" "napsaterm.guide/Telnet protocol"
@Next "Serial device"
@Prev "rlogin protocol"
@Toc "IO modes"
Serial devices
--------------
The Telnet protocol is described in various RFC documents. It is a
generic remote session protocol with rich features and more general use
than @{"rlogin protocol" Link "rlogin protocol"}.
Currently the Napsaterm supports terminal type and size negotation.
It does not pass your user name to telnet server.
@EndNode
@Node "Serial device" "napsaterm.guide/Serial device"
@Next "DNet"
@Prev "Telnet protocol"
@Toc "IO modes"
Serial devices
--------------
Napsaterm can use any `serial.device'-compatible Exec device. You
can specify the device name and unit number with tool types or command
line options. See @{"Device options" Link "Device options"}.
You can start Napsaterm in shared mode, See @{"-shared" Link "Device options"}. In "shared
mode" other programs (like another Napsaterm) can open serial device in
the same time. The actual input data is is not shared, but all programs
will read the data from device in their turn. Napsaterm can stop
reading data from serial device, see @{"Unlisten" Link "Command menu"}.
@EndNode
@Node "DNet" "napsaterm.guide/DNet"
@Next "DOS IO"
@Prev "Serial device"
@Toc "IO modes"
DNet
----
"DNet" is a serial line multiplexing protocol with priorities and
provisions for server/client architecture. It works between Amigas and
Unix machines running 4BSD or SunOS. There are ports for different 4BSD
variants and Linux. There exists many network-type applications for
DNet.
If you are using "DNet", you can use Napsaterm instead of `FTerm'.
@EndNode
@Node "DOS IO" "napsaterm.guide/DOS IO"
@Prev "DNet"
@Toc "IO modes"
DOS IO
------
The input and output of Napsaterm can be read from and written to
"standard input" and "standard output" DOS IO streams. For example, if
you want to view a VT100 animation with Napsaterm, you can give command
Napsaterm --slow --stdio < vt100-animation-file
@EndNode
@Node "Tektronix emulation" "napsaterm.guide/Tektronix emulation"
@Next "History"
@Prev "IO modes"
@Toc "Main"
Tektronix emulation
===================
There are two versions of Napsaterm binaries in distribution archive,
one with Tektronix emulation and one without. The tektronix emulation
is implemented in separate window, the VT100 window works as usually.
Two menu items have been added to Tektronix emulation version. They
are `To VT102' and `To Tek4010'. When a emulation window (tek or vt)
is selected, it may be brought to the front and activated (depending on
settings of the config menus on the Tek4010 window). However, if you
click in a window, or bring it to the front, it does not necessarily
make it the one receiving data from the host. The `To Tek4010' and `To
VT102' menu items in each screen switch that, as can certain escape
sequences from the host.
@EndNode
@Node "History" "napsaterm.guide/History"
@Next "Glossary"
@Prev "Tektronix emulation"
@Toc "Main"
Napsaterm History
=================
Napsaterm is derived originally from Niftyterm 1.2. It is called
Napsaterm because original authors wanted to keep distinction clear
between it and their versions of Niftyterm. See @{"Niftyterm licence" Link "Niftyterm licence"}.
There are some features in Napsaterm 3 which are incompatible with
earlier versions or with NiftyTerm 1.2.
@{" Changes in Version 3 " Link "Changes in Version 3"}
@{" Changes in Version 2 " Link "Changes in Version 2"}
@{" Changes in Version 1 " Link "Changes in Version 1"}
@EndNode
@Node "Changes in Version 3" "napsaterm.guide/Changes in Version 3"
@Next "Changes in Version 2"
@Toc "History"
Changed in Version 3.9
----------------------
* The AmiTCP/IP error messages are now printed when using the rlogin
or telnet protocol.
* A brave new `About' requester was added. Currently, it is modal.
Changed in Version 3.8
----------------------
* The tool type `CTRL8BIT' is no more enabled by default, ie. 7 bit
control codes are used normally.
* Bug with audio bell is fixed.
Changed in Version 3.7
----------------------
* Support for @{"Telnet protocol" Link "Telnet protocol"} was added. Supported features include
terminal type and size negotation.
* The long options have now double hyphen at the beginning.
* The 8-bit/7-bit control codes are working for all keys.
* New menu item added, See @{"Control Codes" Link "Setup menu"}, which enables sending
8-bit control codes.
Changed in Versions 3.4 and 3.5
-------------------------------
Robert Knop, `<rknop@cco.caltech.edu>', released these versions.
The major new feature in these releases is the @{"Tektronix emulation" Link "Tektronix emulation"}.
Any bug reports on the tek4010 emulation should be sent to Rob Knop.
* The tek4010 emulation has following features:
- Vector, Alpha, Incremental, and Point-plot modes are (at
least partially) supported.
- As of version 3.5, the GIN cursor is supported.
- Some GraphOn enhancements, e.g. block fill mode, are also
supported.
- * `ANSI LNM' added to the @{"Setup menu" Link "Setup menu"}. Sometimes changing the state
of this flag can improve the operation of the terminal's newlines
under Unix when running directly over the serial port. It does
not seem to be necessary when Napsaterm is used with AmiTCP/IP.
* Support for the VT100 application keypad has been added. Under the
@{"Setup menu" Link "Setup menu"}, if you select `Application' for keypad type, VT100
escape sequences will be sent to the host instead of characters
when you hit keys on the numeric keypad. This is handy for text
editors and the like that use the keypad as a function keypad.
* A small number of additional minor enhancements and bugfixes to
the VT100 emulation.
Changed in Version 3.3
----------------------
* For compatibility reasons, if the file `AmiTCP:db/NapsaPrefs' does
not exist, the files `S:NapsaPrefs' and `S:NiftyPrefs' are
searched for preferences.
* New menu item `Left Alt key is' was added to `Setup' menu.
Changes in Version 3.2 (3beta)
------------------------------
* Workbench support is added. You can start Napsaterm directly from
Workbench
* As a consequence of previous, the preference parsing is altered.
See @{"Preference file" Link "Preference file"}. Preference files are used only when Napsaterm
started from shell. The program name used in preference parsing is
not fixed, the command name given by shell is used
* Napsaterm can select randomly a host if it is given multiple host
names
* Mouse support is enchanched. (See @{"Mouse" Link "Emulation options"}.) Napsaterm sends Mouse
events as `ESC M' sequences. Preference `Emacsmode' is obsolete
and it is supported no more
* New preference `Backspace2Delete'. (See @{"Backspace2Delete" Link "Emulation options"}.) There
was an old preference `NormalBackspace', which had opposite meaning
* New preference `Delete2Backspace'. (See @{"Delete2Backspace" Link "Emulation options"}.) There
was an old preference `NormalDelete', which had opposite meaning
* Preference `LineSpeed' is used to change the serial speed, also a
new option `-B' changes the line speed
* Preference `National' has now three values, `None', `MultiNatinal'
and `National'
@EndNode
@Node "Changes in Version 2" "napsaterm.guide/Changes in Version 2"
@Next "Changes in Version 1"
@Prev "Changes in Version 3"
@Toc "History"
Changes in Version 2.2
----------------------
* Preference `PubScreenName'
* Preference `ctrl8bit'
* Preference `Keyboard' was mentioned version 2 documentation instead
of correct preference `Keymap'. Now both preferences can be used
Changes in Version 2.1
----------------------
* Option `-p' selects the public screen
* The preference file is moved into the directory `AmiTCP:db/'
Changes in Version 2.0
----------------------
The AmiTCP/IP BSD socket interface was added to Napsaterm after the
porting of real "rlogin" program seemed to take too much effort and
time. The @{"rlogin protocol" Link "rlogin protocol"} is a very simple. However asynchronous,
interactive IO with AmigaDOS is quite ineffective and quite complex to
implement. Fortunately Niftyterm IO implementation was extremely
flexible and it was easy to add new IO methods for rlogin.
* Option `-d net' selects now rlogin protocol (`-d dnet' will select
DNet).
* New preferences:
`Linespeed'
`RemoteName'
`RemoteType'
@EndNode
@Node "Changes in Version 1" "napsaterm.guide/Changes in Version 1"
@Prev "Changes in Version 2"
@Toc "History"
Napsaterm 1.3 Compared to Niftyterm 1.2
---------------------------------------
* Support for different international keyboards layouts and
character sets is added. Napsaterm supports multinational ISO
8857-Latin-1 character set, the native Amiga character set. It
also supports some ISO 646 national character sets. For the
character tables for ISO 646 character sets see @{"Character tables" Link "Character tables"}.
* New preferences were added:
`Keymap'
`National'
* Left Alt key can be used as a Meta key by setting the `AltisMeta'
preference. If you press a key with Left Alt key Napsaterm sends
an `Escape' character (ASCII 27) before the key's ASCII code.
Niftyterm sets the 8th bit of sent ASCII code.
* Switching Delete and Backspace keys was enchanched. Switching
Delete and Backspace keys are now done before key code conversion.
So, even if the Backspace key (arrow to left above the Enter key)
will send a `DEL' code (ASCII 127) but if you press CTRL and H,
Napsaterm sends still `^H' (ASCII 8).
* A bug in the clipboard handling is fixed.
* Napsaterm do not free the console window when it is started, you
must start it explicitly with run. Iconify feature is removed (if
you really want it, do recompile from the sources).
* Iconifying was removed as the zoom feature in Amiga OS 2.04 had
most of its functionality
@EndNode
@Node "Glossary" "napsaterm.guide/Glossary"
@Next "Index"
@Prev "History"
@Toc "Main"
Glossary
========
@EndNode
@Node "Index" "napsaterm.guide/Index"
@Prev "Glossary"
@Toc "Main"
Index
=====
@Index "Index"
@{" .rhosts file " Link "rlogin protocol"} rlogin protocol
@{" --80 option " Link "Display options"} Display options
@{" --application option " Link "Emulation options"} Emulation options
@{" --h19 option " Link "Emulation options"} Emulation options
@{" --ic option " Link "Emulation options"} Emulation options
@{" --numeric option " Link "Emulation options"} Emulation options
@{" --shared option " Link "Device options"} Device options
@{" --slow option " Link "Emulation options"} Emulation options
@{" --stdio option " Link "Device options"} Device options
@{" --vt102 option " Link "Emulation options"} Emulation options
@{" --vt52 option " Link "Emulation options"} Emulation options
@{" -7 option " Link "Emulation options"} Emulation options
@{" -B option " Link "Device options"} Device options
@{" -d option " Link "Device options"} Device options
@{" -f option " Link "Display options"} Display options
@{" -g option " Link "Display options"} Display options
@{" -l option " Link "General options"} General options
@{" -N option " Link "Device options"} Device options
@{" -p option " Link "Display options"} Display options
@{" -r option " Link "Device options"} Device options
@{" -S option " Link "Display options"} Display options
@{" -s option " Link "Device options"} Device options
@{" -u option " Link "Device options"} Device options
@{" -v option " Link "Emulation options"} Emulation options
@{" -V option " Link "General options"} General options
@{" -w option " Link "General options"} General options
@{" ALTISMETA tool type " Link "Emulation options"} Emulation options
@{" BACKSPACE2DELETE tool type " Link "Emulation options"} Emulation options
@{" BASEFONT tool type " Link "Display options"} Display options
@{" BELL tool type " Link "Emulation options"} Emulation options
@{" CTRL8BIT tool type " Link "Emulation options"} Emulation options
@{" CURSORBLINK tool type " Link "Emulation options"} Emulation options
@{" CURSOR tool type " Link "Emulation options"} Emulation options
@{" DELETE2BACKSPACE tool type " Link "Emulation options"} Emulation options
@{" DEVICE tool type " Link "Device options"} Device options
@{" EMULATION tool type " Link "Emulation options"} Emulation options
@{" FIXEDCOLUMNS tool type " Link "Display options"} Display options
@{" GEOMETRY tool type " Link "Display options"} Display options
@{" HOST tool type " Link "Host names"} Host names
@{" INVERSE tool type " Link "Emulation options"} Emulation options
@{" KEYBOARD tool type " Link "Emulation options"} Emulation options
@{" KEYMAP tool type " Link "Emulation options"} Emulation options
@{" KEYPAD tool type " Link "Emulation options"} Emulation options
@{" LINESPEED tool type " Link "Device options"} Device options
@{" MOUSE tool type " Link "Emulation options"} Emulation options
@{" NATIONAL tool type " Link "Emulation options"} Emulation options
@{" NATION tool type " Link "Emulation options"} Emulation options
@{" PASS8 tool type " Link "Emulation options"} Emulation options
@{" PUBSCREENNAME tool type " Link "Display options"} Display options
@{" REMOTENAME tool type " Link "Device options"} Device options
@{" REMOTETYPE tool type " Link "Device options"} Device options
@{" SERVICE tool type " Link "Device options"} Device options
@{" SHARED tool type " Link "Device options"} Device options
@{" SIZEGADGET tool type " Link "Display options"} Display options
@{" TITLE tool type " Link "Display options"} Display options
@{" UNIT tool type " Link "Device options"} Device options
@{" stty " Link "rlogin protocol"} rlogin protocol
@{" Alternate character set " Link "Fonts"} Fonts
@{" Alternative command names " Link "Alternative command names"} Alternative command names
@{" AmiTCP/IP Group " Link "About"} About
@{" Ansi LNM " Link "Setup menu"} Setup menu
@{" Backspace is sent as " Link "Setup menu"} Setup menu
@{" Bell Type " Link "Setup menu"} Setup menu
@{" Break " Link "Command menu"} Command menu
@{" Changing command name " Link "Alternative command names"} Alternative command names
@{" Clear Screen " Link "Command menu"} Command menu
@{" Command line interface " Link "Invoking from Shell"} Invoking from Shell
@{" Command menu " Link "Command menu"} Command menu
@{" Control Codes " Link "Setup menu"} Setup menu
@{" Copy " Link "Edit menu"} Edit menu
@{" Copying " Link "Copying Napsaterm"} Copying Napsaterm
@{" Cursor " Link "Setup menu"} Setup menu
@{" Default national keymaps " Link "Keymaps"} Keymaps
@{" Del is sent as " Link "Setup menu"} Setup menu
@{" detaching " Link "Changes in Version 1"} Changes in Version 1
@{" Device options " Link "Device options"} Device options
@{" Display Speed " Link "Setup menu"} Setup menu
@{" Display Width " Link "Setup menu"} Setup menu
@{" Display options " Link "Display options"} Display options
@{" DNet " Link "DNet"} DNet
@{" DOS IO " Link "DOS IO"} DOS IO
@{" Double-height font " Link "Fonts"} Fonts
@{" Double-width font " Link "Fonts"} Fonts
@{" Edit menu " Link "Edit menu"} Edit menu
@{" Emulation options " Link "Emulation options"} Emulation options
@{" Environment variable USER " Link "rlogin protocol"} rlogin protocol
@{" Execute " Link "Edit menu"} Edit menu
@{" Flush " Link "Command menu"} Command menu
@{" Fonts " Link "Fonts"} Fonts
@{" FTerm " Link "DNet"} DNet
@{" General options " Link "General options"} General options
@{" Host names " Link "Host names"} Host names
@{" Icon interface " Link "Invoking from Workbench"} Invoking from Workbench
@{" Interlace screen " Link "Fonts"} Fonts
@{" Intuition menus " Link "Menus"} Menus
@{" Invoking from CLI " Link "Invoking from Shell"} Invoking from Shell
@{" Invoking from workbench " Link "Invoking from Workbench"} Invoking from Workbench
@{" IO modes " Link "IO modes"} IO modes
@{" ISO 646 " Link "Character tables"} Character tables
@{" ISO 8857-Latin-1 " Link "Changes in Version 1"} Changes in Version 1
@{" Keymaps " Link "Keymaps"} Keymaps
@{" Keypad " Link "Setup menu"} Setup menu
@{" Knop, Robert " Link "About"} About
@{" Latin 1 " Link "Changes in Version 1"} Changes in Version 1
@{" Left Alt key is " Link "Setup menu"} Setup menu
@{" Licence " Link "Copying Napsaterm"} Copying Napsaterm
@{" Licence, Niftyterm " Link "Niftyterm licence"} Niftyterm licence
@{" Line speed " Link "rlogin protocol"} rlogin protocol
@{" Listen " Link "Command menu"} Command menu
@{" LOGFILE tool type " Link "General options"} General options
@{" Menus, Intuition " Link "Menus"} Menus
@{" Mononational mode " Link "National"} National
@{" Mouse Events " Link "Setup menu"} Setup menu
@{" Move " Link "Edit menu"} Edit menu
@{" Multinational mode " Link "National"} National
@{" Napsa, font " Link "Fonts"} Fonts
@{" NapsaPrefs " Link "Preference file"} Preference file
@{" NapsatermUK " Link "Alternative command names"} Alternative command names
@{" NapsatermUS " Link "Alternative command names"} Alternative command names
@{" Nation " Link "Setup menu"} Setup menu
@{" National Mode " Link "Setup menu"} Setup menu
@{" National character tables " Link "Character tables"} Character tables
@{" National keymaps " Link "Keymaps"} Keymaps
@{" National mode " Link "National"} National
@{" National modes " Link "National"} National
@{" Nations, available " Link "Emulation options"} Emulation options
@{" Newman, Christopher J. " Link "Niftyterm licence"} Niftyterm licence
@{" Niftyterm licence " Link "Niftyterm licence"} Niftyterm licence
@{" Non-Interlace screen " Link "Fonts"} Fonts
@{" Ollila, Tomi " Link "About"} About
@{" Option --80 " Link "Display options"} Display options
@{" Option --application " Link "Emulation options"} Emulation options
@{" Option --h19 " Link "Emulation options"} Emulation options
@{" Option --ic " Link "Emulation options"} Emulation options
@{" Option --numeric " Link "Emulation options"} Emulation options
@{" Option --shared " Link "Device options"} Device options
@{" Option --slow " Link "Emulation options"} Emulation options
@{" Option --stdio " Link "Device options"} Device options
@{" Option --vt102 " Link "Emulation options"} Emulation options
@{" Option --vt52 " Link "Emulation options"} Emulation options
@{" Option -7 " Link "Emulation options"} Emulation options
@{" Option -B " Link "Device options"} Device options
@{" Option -d " Link "Device options"} Device options
@{" Option -f " Link "Display options"} Display options
@{" Option -g " Link "Display options"} Display options
@{" Option -l " Link "General options"} General options
@{" Option -N " Link "Device options"} Device options
@{" Option -p " Link "Display options"} Display options
@{" Option -r " Link "Device options"} Device options
@{" Option -S " Link "Display options"} Display options
@{" Option -s " Link "Device options"} Device options
@{" Option -u " Link "Device options"} Device options
@{" Option -V " Link "General options"} General options
@{" Option -v " Link "Emulation options"} Emulation options
@{" Option -w " Link "General options"} General options
@{" Options " Link "Options"} Options
@{" Options, Device " Link "Device options"} Device options
@{" Options, Display " Link "Display options"} Display options
@{" Options, Emulation " Link "Emulation options"} Emulation options
@{" Options, General " Link "General options"} General options
@{" Options, Overview of CLI " Link "Invoking from Shell"} Invoking from Shell
@{" Password " Link "rlogin protocol"} rlogin protocol
@{" Paste " Link "Edit menu"} Edit menu
@{" Pessi, Pekka " Link "About"} About
@{" Peuhkuri, Markus " Link "About"} About
@{" Preference file " Link "Preference file"} Preference file
@{" Preferences " Link "Preference file"} Preference file
@{" Quit " Link "Command menu"} Command menu
@{" Rajahalme, Jarno " Link "About"} About
@{" Remote user name " Link "rlogin protocol"} rlogin protocol
@{" Reverse " Link "Setup menu"} Setup menu
@{" RFC 1282 " Link "rlogin protocol"} rlogin protocol
@{" Rlogin client " Link "rlogin protocol"} rlogin protocol
@{" Rlogin protocol " Link "rlogin protocol"} rlogin protocol
@{" Rlogin server " Link "rlogin protocol"} rlogin protocol
@{" Serial devices " Link "Serial device"} Serial device
@{" serial.device " Link "Serial device"} Serial device
@{" Setup menu " Link "Setup menu"} Setup menu
@{" Shared mode " Link "Serial device"} Serial device
@{" Soft Reset " Link "Command menu"} Command menu
@{" Standard input/output " Link "DOS IO"} DOS IO
@{" Starting from CLI " Link "Invoking from Shell"} Invoking from Shell
@{" Starting from Workbench " Link "Invoking from Workbench"} Invoking from Workbench
@{" stdio " Link "DOS IO"} DOS IO
@{" Telnet " Link "rlogin protocol"} rlogin protocol
@{" Telnet Protocol " Link "Telnet protocol"} Telnet protocol
@{" Terminal Type " Link "Setup menu"} Setup menu
@{" Terminal type " Link "rlogin protocol"} rlogin protocol
@{" To Tek4010 " Link "Command menu"} Command menu
@{" To VT102 " Link "Command menu"} Command menu
@{" Tool type ALTISMETA " Link "Emulation options"} Emulation options
@{" Tool type BACKSPACE2DELETE " Link "Emulation options"} Emulation options
@{" Tool type BASEFONT " Link "Display options"} Display options
@{" Tool type BELL " Link "Emulation options"} Emulation options
@{" Tool type CTRL8BIT " Link "Emulation options"} Emulation options
@{" Tool type CURSORBLINK " Link "Emulation options"} Emulation options
@{" Tool type CURSOR " Link "Emulation options"} Emulation options
@{" Tool type DELETE2BACKSPACE " Link "Emulation options"} Emulation options
@{" Tool type DEVICE " Link "Device options"} Device options
@{" Tool type EMULATION " Link "Emulation options"} Emulation options
@{" Tool type FIXEDCOLUMNS " Link "Display options"} Display options
@{" Tool type GEOMETRY " Link "Display options"} Display options
@{" Tool type HOST " Link "Host names"} Host names
@{" Tool type INVERSE " Link "Emulation options"} Emulation options
@{" Tool type KEYBOARD " Link "Emulation options"} Emulation options
@{" Tool type KEYMAP " Link "Emulation options"} Emulation options
@{" Tool type KEYPAD " Link "Emulation options"} Emulation options
@{" Tool type LINESPEED " Link "Device options"} Device options
@{" Tool type MOUSE " Link "Emulation options"} Emulation options
@{" Tool type NATIONAL " Link "Emulation options"} Emulation options
@{" Tool type NATION " Link "Emulation options"} Emulation options
@{" Tool type PASS8 " Link "Emulation options"} Emulation options
@{" Tool type PUBSCREENNAME " Link "Display options"} Display options
@{" Tool type REMOTENAME " Link "Device options"} Device options
@{" Tool type REMOTETYPE " Link "Device options"} Device options
@{" Tool type SERVICE " Link "Device options"} Device options
@{" Tool type SHARED " Link "Device options"} Device options
@{" Tool type SIZEGADGET " Link "Display options"} Display options
@{" Tool type TITLE " Link "Display options"} Display options
@{" Tool type UNIT " Link "Device options"} Device options
@{" Tool type LOGFILE " Link "General options"} General options
@{" Tool type WAITTOEND " Link "General options"} General options
@{" Tool types " Link "Options"} Options
@{" Tool types " Link "Invoking from Workbench"} Invoking from Workbench
@{" Unlisten " Link "Command menu"} Command menu
@{" Usage " Link "Invoking from Shell"} Invoking from Shell
@{" USER environment variable " Link "rlogin protocol"} rlogin protocol
@{" VT100 animations " Link "Device options"} Device options
@{" VT100 animations " Link "Emulation options"} Emulation options
@{" VT100 animations " Link "DOS IO"} DOS IO
@{" WAITTOEND tool type " Link "General options"} General options
@{" Warranty " Link "Niftyterm licence"} Niftyterm licence
@{" Williamson, Todd " Link "Niftyterm licence"} Niftyterm licence
@{" ~/.rhosts file " Link "rlogin protocol"} rlogin protocol
@EndNode
