Operations << >>

General Properties

Use the General property page to specify a display name for the POP3 object and to enable or disable POP3 for the site or server.

Getting to the General property page

  1. In the Administrator window, choose a site or server, and then choose Protocols.
  2. Double-click POP3 (Mail) Site Defaults to configure site POP3 defaults, or POP3 (Mail) Settings to configure a server's POP3 settings.
  3. Select the General tab.

Defining a Display Name

Use the General property page to define the POP3 display name.

  1. Select the General tab.
  2. Type a display name.

Option Description
Display name A maximum of 256 alphanumeric characters, which can include spaces and special characters.
Directory name A name defined automatically during installation that cannot be changed.

Using the Site Defaults

Use the General property page on the POP3 server object to use the default values from the POP3 site object.

Note   This option is available only for POP3 properties in the server container.

  1. Select the General tab.
  2. Select or clear the Use site defaults for all properties check box. Select to use the options you've set for permissions and message format options.

Enabling or Disabling POP3

Use the General property page to enable or disable POP3 on the Microsoft Exchange Server computer or change the site default.

Note   It can take several minutes for the change to take effect.

  1. Select the General tab.
  2. Select or clear the Enable protocol check box.