Maintenance and Troubleshooting << >>

Notification Process

Use the Notification property page to specify how to notify administrators when a connection is in a warning state or an alert state. A warning state, indicating a possible problem, occurs when a ping message fails to return within the bounce duration you set for warning status. An alert state, indicating a serious problem, occurs when a ping message fails to return within the bounce duration you set for an alert status. The symbols in the left column of the Notification property page indicate whether the notification is for an alert state (red down arrow) or a warning state (red exclamation point).

Notifications can be delivered as:

Notifications are also sent when connections are restored.

After you determine the type of notification, you set the escalation path. An escalation path is a prioritized list of people to notify when a monitor is in an alert state. This list is useful for notifying primary and secondary support personnel. For example, the primary support person can be notified immediately when the monitor enters a warning state, whereas the secondary personnel can have a longer time delay or not be notified until the monitor enters an alert state.

You might want to set a staggered time for three support people: a primary support person and two secondary support people. These three notifications could be staggered from immediate notification to one hour. You must complete the notification setup process three times, once for each person.

Getting to the Notification property page

  1. In the Administrator window, choose Monitors.
  2. Double-click the link monitor you want to update.
  3. Select the Notification tab.

Using Notification Applications

You can use notification applications to alert users who are not logged on to the network. This is appropriate for an administrator who monitors the network remotely using a pager program.

  1. Select the Notification tab.
  2. Choose New.
  3. Select Launch a Process, and then choose OK.
  4. In the Time delay box, type the amount of time after entering an alert state that you want the notification process to begin. Select Seconds, Minutes, or Hours.
  5. Choose File to browse for a process to launch.
  6. In the Command line parameters box, type any command parameters.

Option Description
Time delay The amount of time after the monitor enters an alert state or a warning state that you want the notification process to start. The default is 15 minutes.
Alert only Select to send notification only if the monitor is in an alert state. Clear to send notification in both the warning and alert states.
File Select a file name. This name appears in the Launch process box.
Command line parameters Type special command-line parameters if appropriate.
Append notification text to parameter list Select to attach the standard notification text to the parameters list specified in the Command line parameters box. Clear to avoid attaching any text to the parameter list.
Test Verify that the process works as expected.

Using Mail Messages

You can use mail messages to alert a specified recipient when a problem occurs. This type of notification is useful for historical tracking and roving users.

  1. Select the Notification tab.
  2. Choose New.
  3. Select Mail Message, and then choose OK.
  4. Set the time delay when notification should occur, and the mailbox to notify.

Option Description
Time delay The amount of time after the monitor enters an alert state or a warning state that you want the notification process to start. The delay is equal to the greater of the time delay or polling interval. The default is 15 minutes.
Alert only Select to send notification only if the monitor is in an alert state. Clear to send notification in both the warning and alert states.
Recipient Select a name from a list of recipients. This name appears in the Mailbox to notify box.
Test Verify that the message is sent correctly.

Using Network Alerts

You can use network alerts to send an alert message to a computer. However, an alert message cannot be delivered if the computer is not turned on, no one is currently logged on to the computer, or the messaging service is not running. This type of notification is best for monitoring users on the same local area network (LAN) as the monitor.

  1. Select the Notification tab.
  2. Choose New.
  3. In the New Notification dialog box, select Windows NT Alert, and then choose OK.
  4. In the Escalation Editor dialog box, set the time delay when notification should occur and the computer to notify.

Option Description
Time delay The amount of time after the monitor enters an alert state or a warning state that you want the notification process to start. The default is 15 minutes.
Alert only Select to send notification only if the monitor is in an alert state. Clear to send notification in both the warning and alert states.
Computer to alert Type the name of the computer to receive the alert message.
Test Verify that the message is sent correctly.

Modifying a Notification

You can change existing notifications. For example, you can change the time delay or the recipient of a mail message alert.

  1. Select the Notification tab.
  2. Select a notification, and then choose Edit.
  3. In the Escalation Editor dialog box, make the changes, and then choose OK.

Removing a Notification

When you no longer want to use a particular notification, you can remove it from the list.

  1. Select the Notification tab.
  2. Select the notification you want to remove, and then choose Remove.