[Adrian Worman]

Hi mates, got an e-body box at the weekend to replace the non correct short box in my Chally, but could do with a few pics of the correct washers and clips for the clutch and shift rods. The diagrams I see are just of the parts, not the assy, and the factory manual doe'snt make it clear enough for me Seen some service kits on Brewers page, looks good value, any body used 'em

[Eddie]

Adrian, sorry no pics of the assembly. But, I do use his CNC bent shift rods for my 18 splined 'Hemi' box. I love em, just got out of the R/T,,went to the local Dodge Dealership. Shifts great. If I werer to replace anything I would check the plastic bushings and C-Clips, any missing parts will make it shift more difficult. I also use Jaimie Passon's semi-synthetic fluid in my gearbox, but others have used motor oil mixed with transmission fluid for the same effect but I was concerned about the soft bronze parts so I went with a proven fluid. No worries about some detergents/additives that are harmful to soft metals.

[Adrian Worman]

I replaced all the washers and spring clips with shims and R clips on the mechanism I'm using now and it improved shift performance no end, so might stick with what I know. Will try a perf fluid tho Edd, thanks for that

[Pat]

Here you can find al you ever need in 4 speed parts for your Mopar and al the exerience also that is needed if you phone them up http://www.brewersperformance.com/

[Adrian Worman]

Ta for that Pat, already used em for a lot of parts, Passon Performance are a good source of parts too