[plum-crazy]

Hello Guys.

I bought five or six years ago the powermaster XS starter for my 440.
Once I swapped the hemi engine I kept the same starter and works well too.
The friend who bought me my 440 used his stock starter until it finall die and then he dedided to buy a Power Master like mine.

The summit reference is PWM-9513 http://www.summitracing.com/parts/PWM-9513 but they changed the case, instead one piece now has these slim screws fitting both pieces that breaks easily.

There's other references of starters like http://www.summitracing.com/parts/PWM-9523/ or http://www.summitracing.com/parts/PWM-19513/
but at this time I'm not sure about it.

I read the 19513 do not have adjusting block, maybe have more strength than the 9513. Al less the picture is different.

What do you recommend, small but strong?

Thanks.

[dave-r]

I don't know anyone that uses those. Everyone I know just uses the regular Mopar type mini-starter to replace the heavy stock unit.

[drewcrane]

I installed that same starter a year ago,no problems yet,and i have driven it just about every day now so no problems, and mine has the adjustment block, i tried it on in 3 different positions and found the way it came from the box was the best position

[plum-crazy]

I don't know anyone that uses those. Everyone I know just uses the regular Mopar type mini-starter to replace the heavy stock unit.

What is the brand?

[dave-r]

I don't know anyone that uses those. Everyone I know just uses the regular Mopar type mini-starter to replace the heavy stock unit.

What is the brand?

Mopar. But they are actually made by Denso who make the starters and alternators for most of the motor manufacturers. They are standard on the modern Mopars.

http://www.moparmusclemagazine.com/tech ... index.html

[plum-crazy]

I don't know anyone that uses those. Everyone I know just uses the regular Mopar type mini-starter to replace the heavy stock unit.

What is the brand?

Mopar. But they are actually made by Denso who make the starters and alternators for most of the motor manufacturers. They are standard on the modern Mopars.

http://www.moparmusclemagazine.com/tech ... index.html

Do you know if it is available in summit racing?

Thanks

Maybe this one? http://www.summitracing.com/parts/TFF-6084B/

[dave-r]

Available everywhere I think. It is a very common part. Cheapest is often Ebay.

[dave-r]

Here;

http://www.summitracing.com/parts/SUM-820337/

[jimbob 440]

i use power master with the adjustable block on the front of it, so far its the best starter ive ever used for mopar, never struggles at any temp

[plum-crazy]

i use power master with the adjustable block on the front of it, so far its the best starter ive ever used for mopar, never struggles at any temp

Could you confirm the part reference?

Thanks

[jimbob 440]

the one i have powermaster xs 9513 your right about the screws it does look a bit weak but ive had no probs and fully rate it, certainly a powerfull starter