trunk gasket • The Dodge Challenger Message Board

by **botari123** » 18 Dec 2007 0:51

who makes the rubber trunk floor gasket for the filler tube??

by **Jon** » 18 Dec 2007 1:25

Year One is the only supplier I know of.

by **christer** » 18 Dec 2007 21:53

http://www.themoparshop.com/shop/

$26

by **Moparman1972** » 28 Mar 2008 2:43

Ok, so is there a separate gasket going between the filler neck and the tank? I took my tank apart when I was 12, so my memory's a little fuzzy, and the tank and neck were holed beyond repair, so who knows what was missing. I got a new tank in and it didnt come with anything like that. I still have whats left of the rubber boot that goes on the trunk floor, thats not the one I'm talking about.

by **dave-r** » 28 Mar 2008 9:51

The tank has a big rubber gromit in the opening. The filler neck pushes through that. Then you have the one pictured which is on the floor. Last of all is a foam gasket that sits between the end of the filler neck and the inside of the quater panel.

by **Moparman1972** » 29 Mar 2008 14:03

Well, looks like I'm going hunting again. I dont have any of those pieces.

by **Jon** » 29 Mar 2008 14:52

Chrysler still sells the fuel tank filler tube grommet if you get in a pinch. The one for the fender to filler tube can be easily made from either a rubber or a foam type material that won't melt if in contact with gasoline.

by **dave-r** » 29 Mar 2008 14:55

Moparman1972 wrote:Well, looks like I'm going hunting again. I dont have any of those pieces.

All available from the usual restoration places.