Hello guys, trying to get my 73 smallblock electronic ignition system figured out. Cannot get spark, check coil and only getting 7.36 volts. Verified getting 13v at the bulkhead connector ignition run pin 23 and 7.36v ignition start pin 22. My question is what should I have at the coil positive and on pin 22. What could be causing this issue. The weird thing about this is I had the car running a week ago after installing a new wiring harness but decided to put a new edelbrock performer carb on it. Now I get no spark So much for a quick carb upgrade... I guess its a good thing I have the fenders off getting painted. Would hate to have this problem if the car was able to drive...
Thanks
Mike