@CLS@@X70┌@X7F────────────────────────────────────────────────────────────────────────────┐@X07 @X70│ @X71Transfer Protocols are used to provide @X74error detection/correction @X71of file @X7F│@X07 @X70│ @X71transfers between YOU the caller, and the BBS system. @X7F│@X07 @X70@X70│ @X7F│@X07 @X70│ @X71The following Protocols are NON-batch (@X7F1 file at a time@X71) Protocols: @X7F│@X07 @X70│ @X74ASCII - @X71(for pure text file transfers ONLY. NOT recommended) @X7F│@X07 @X70│ @X74XMODEM/CHECKSUM @X7F│@X07 @X70│ @X74XMODEM/CRC @X7F│@X07 @X70│ @X741K-XMODEM - @X71(A.K.A. NON-BATCH MODE YMODEM) @X7F│@X07 @X70│ @X741K-XMODEM/G - @X71(A.K.A. NON-BATCH MODEM YMODEM/G) @X7F│@X07 @X70│ @X7F│@X07 @X70│ @X71The following Protocols are BATCH MODE (@X7Fmultiple file@X71) download Protocols: @X7F│@X07 @X70│ @X74YMODEM/G BATCH @X71(Error Correcting Modems Required on BOTH ends!) @X7F│@X07 @X70│ @X74ZMODEM - BATCH @X71(@X7FRecommended@X71 if supported by your communications program) @X7F│@X07 @X70│ @X7F│@X07 @X70│ @X7F│@X07 @X70│ @X71Whatever Transfer Protocol you select to use, your communications program @X7F│@X07 @X70│ @X74MUST @X71be capable of supporting it! Also, your selection must @X74MATCH @X71on both @X7F│@X07 @X70│ @X71ends of your connection. i.e. set your communications program @X74AND @X71your @X7F│@X07 @X70│ @X71selection on this BBS to one and the same! Mis-matched Protocols will fail!@X7F│@X07 @X70└────────────────────────────────────────────────────────────────────────────@X7F┘@X07