/GetDefaultLimit

Queries the default channel member limit.

Note The default value is 25. If a channel is created or set with a member limit of zero, the default channel member limit defined by the /SetDefaultLimit switch is used as the member limit.

Syntax

Chatcmd ServerList /GetDefaultLimit

Parts

ServerList

This switch supports multiple servers in its command line. Retrieving the Default Limit value from one server does not show the DefaultLimit value on other servers on the network. All applicable servers should be listed, in the form Server1,Server2,Server3¼.

Examples

	chatcmd myserv01 /getdefaultlimit
	Retrieves the default channel member limit on Myserv01.