page 66,132
;============================================================================
; ALIAS.COM adds a command line stack, a command line editor, and
; an alias function to COMMAND.COM. Syntax is:
;
; ALIAS [alias [command]] [/F filename] [/S nn] [/U]
; [/B] [/E] [/D] [/L] [/U] [/*] [//]
;
; where /B = Set size of buffer for future alias commands
; /D = Disable alias translation
; /E = Enable alias translation
; /F = Filename of file with list of commands
; /L = List aliases currently in list
; /M = Set minimum command length to save
; /S = Size of command line stack where "nn" is the number of commands
; to save
; /U = Uninstall the program
; /* or // = Comment. Ignore remainder of the line.
;
;
; Revision History:
;
; Version 1.0 Initial Release PC Magazine Vol 8 Num 22
;
; Version 1.1 Fixed %% bug January 3, 1989
; Fixed DOS 3.2 bug
; Now works in OS/2 DOS box
; Support for COMMAND.COM shelling
; Reduced installation memory requirments
;
;============================================================================
code segment
assume cs:code
org 2ch
env_segment dw ? ;Word containing the segment
; of the program's env. block.
org 80h
command_tail db ? ;Offset of the command tail.
org 100h
main: jmp initialize
program db 13,10,"ALIAS 1.1 "
copyright db "(c) 1990 Ziff Communications Co.",10,13
authors db "PC Magazine ",254," Doug Boling and Jeff Prosise"
db 10,13,"$",1Ah
;
;Change the following two numbers to adjust the size of alias on installation.
;
filebuf_size dw 0400h ;Size of input file buffer.
max_code_size dw 0AF0h ;Max size of installed code.
aliaslist_ptr dd ? ;Pointer to alias list.
aliaslist_size dw ? ;Pointer to end of list seg
work_buff_ptr dw ? ;Pointer to alias working buff
chk_alias db 1 ;Alias enable flag.
minlength db 1 ;Minimum len of cmd to stack
cmdstack_base dw ? ;Offset of command stack
cmdstack_size dw 16 ;Size of command stack.
cmdcom_psp dw 0 ;Segment of COMMAND.COM PSP
master_env dw 0 ;Segment of master environment
cef_pointer dd ? ;Pointer to critical err flag
dos_version dw 0 ;DOS Version number
mystack_ptr dw offset end_of_resident + 512 ;Ptr to internal stack
saved_ss dw ?
saved_sp dw ?
int21h dd -1 ;Int 21 vector (DOS)
int2fh dd -1 ;Int 2f vector (DOS MULTIPLEX)
multiplex_id db 0dbh ;Program ID for multiplex int
points dw ? ;Scan lines per character
columns db ? ;Number of screen columns
cursor_mode dw ? ;Cursor mode
bufferptr db ? ;Input buffer pointer
next_ptr dw 0 ;Address where next command
; will be stored
cmd_ptr dw 0 ;Address of current command
; in command stack
insert_flag db 0 ;0 = insert off, 1 = on
exkeys db 71,72,75,77,79,80 ;Extended keycode list
db 82,83,115,116,117
exkeys_end = $
ex_entry dw offset ctrl_end ;Jump table for extended
dw offset ctrl_right ; keycodes
dw offset ctrl_left
dw offset delete
dw offset toggle_ins
dw offset next_cmd
dw offset eol
dw offset move_right
dw offset move_left
dw offset prev_cmd
dw offset home
;============================================================================
; DOSINT processes calls to interrupt 21h
;============================================================================
dosint proc far
assume cs:code,ds:nothing,es:nothing
cmp ah,0ah ;Check for char input
je dosint_1 ;If so, continue
goto_dos:
jmp cs:[int21h] ;else pass the call to DOS
;
;Compare the active PSP with COMMAND.COM PSP.
;
dosint_1:
push ax ;Save registers
push bx
mov ah,51h ;Get active PSP segment
cmp word ptr cs:[dos_version],310h
jb early_dos
pushf
call cs:[int21h]
jmp short chkpsp1
early_dos:
push es ;If before DOS 3.1, set
les bx,cs:[cef_pointer] ; critical error flag to
inc byte ptr es:[bx] ; force DOS to use the aux
pushf ; stack.
call cs:[int21h] ;Get active PSP segment
mov ax,bx
les bx,cs:[cef_pointer] ;Reset critical error flag
dec byte ptr es:[bx]
mov bx,ax
pop es
chkpsp1:
cmp bx,cs:[cmdcom_psp] ;See if COMMAND.COM active.
je dosint_2
push es ;If the active PSP has an
mov es,bx ; environment block at a
mov ax,es:[2ch] ; higher memory address than
dec ax ; the PSP, assume that the
mov es,ax ; the active program is a
cmp byte ptr es:[0],"M" ; shelled copy of COMMAND.COM
pop es
jne chkpsp2 ;Valid memory block?
cmp ax,bx ;Env seg > PSP seg?
jae dosint_2 ;Yes, must be shelled copy
chkpsp2:
pop bx ;Cleanup and goto DOS
pop ax
jmp short goto_dos
dosint_2:
cld ;Set direction flag
mov cs:[saved_ss],ss ;Save SS:SP
mov cs:[saved_sp],sp
cli
push cs ;Move to internal stack
pop ss
mov sp,cs:[mystack_ptr]
sti
push bp ;Save remaining registers.
mov bp,sp ;Set up stack access
push cx
push dx
push di
push si
push ds
push es
;
;The call is from COMMAND.COM. Invoke line editor.
;
push dx
call cmd_input
pop dx
cmp cs:[cmdstack_size],0
je dosint_3
call cmd_record
;
;Check for alias before returning to COMMAND.COM
;
dosint_3:
cmp cs:[chk_alias],0 ;See if alias translation
je dosint_exit ; is enabled.
mov si,[bp-4] ;Get pointer to input buffer
inc si
xor cx,cx
or cl,ds:[si] ;Get length of buffer
je dosint_exit ;If buffer empty, exit.
inc si ;Point to 1st char in buffer
mov ax,cs
mov es,ax ;Set ES to installed code.
call searchalias ;See if an alias is found.
jc dosint_exit ;No, exit.
;
;If alias found, copy it from alias list to internal buffer.
;
mov si,di ;Load SI with alias pointer
mov ax,es
mov ds,ax ;Point DS to alias list seg
xor cx,cx
mov cl,ds:[si+3] ;Get size of alias
call getalias ;Get alias from list
;
;Append remainder of command line to alias if no cmd line parameters were used.
;
or dx,dx ;See if any command line
jne dosint_6 ; parameters were used.
push si ;Save pointer to buffer.
push ds
mov di,si
add di,cx ;Point DI to end of alias
mov dx,cx ;Save length of alias
mov si,[bp-4] ;Point DS:SI to command.com
mov ds,[bp-10] ; data buffer.
xor cx,cx
inc si
mov cl,[si] ;Get length of command line.
cmp ah,cl ;See if enough space in
ja dosint_4 ; internal buffer. If not
mov cl,ah ; copy only until buff full.
dosint_4:
inc si
mov bl,1 ;Skip past alias.
call scan4char
jc dosint_5
dec si ;Back up 1 char
inc cx
add dx,cx ;Add length of command line.
rep movsb ;Copy command line
dosint_5:
mov cx,dx ;Restore length of command
pop ds ;Restore pointer
pop si
;
;Copy alias from internal buffer to COMMAND.COM data buffer.
;
dosint_6:
mov di,[bp-4] ;Point ES:DI to command.com
mov es,[bp-10] ; data buffer.
mov al,es:[di] ;Get size of data buffer
dec al ;If alias longer than buffer,
cmp al,cl ; copy only the enough
ja dosint_7 ; characters to fill the
xor cx,cx ; buffer.
mov cl,al
dosint_7:
inc di ;Move DI past length bytes
mov es:[di],cl ;Save length of command
inc di
rep movsb ;Copy alias.
mov byte ptr es:[di],13 ;Append carriage return
dosint_exit:
mov cx,cs:[cursor_mode] ;Set default cursor
mov ah,1
int 10h
pop es
pop ds
pop si
pop di
pop dx
pop cx
pop bp
cli
mov ss,cs:[saved_ss] ;Restore stack pointer
mov sp,cs:[saved_sp]
pop bx
pop ax
iret ;Return to COMMAND.COM
dosint endp
;-----------------------------------------------------------------------------
; GETALIAS Copies an alias from the alias list while substituting any
; environment variables and command line parameters.
; Entry: DS:SI - pointer to alias
; Exit: DS:SI - pointer to buffer containing translated alias.
; AH - free space in buffer
; CX - length of the alias
;-----------------------------------------------------------------------------
getalias proc near
mov di,work_buff_ptr ;Point DI to internal buffer
xor ax,ax ;Point to command by adding
mov al,ds:[si+2] ; the size of the alias to
add si,ax ; pointer to the entry.
add si,4 ;Move past list data.
mov ah,126 ;AH contains max size of buff
xor dx,dx ;Clear flag for line params
alias_1:
lodsb ;Get byte from alias
cmp al,"%" ;See if special character
je alias_3 ;Yes, process special char.
alias_2:
stosb ;Store byte from alias
dec ah ;Dec buffer size counter
jz alias_6 ;If internal buffer full, done
loop alias_1
jmp short alias_6 ;If at end of alias, done
;
;A percent sign has been found indicating a 'soft' parameter.
;
alias_3:
; mov al,ds:[si] ;Get character after %
lodsb
dec cx
cmp al,"%" ;If double %, include in one
je alias_2 ; % in alias.
mov bh,al ;Copy and check to see if
sub bh,"0" ; the next char is a number.
jb alias_5 ; If so, assume a line
cmp bh,9 ; parameter.
ja alias_5
call sublineparam ;Substitute a line paramter
inc dx
alias_4:
loop alias_1
jmp short alias_6 ;If at end of alias, done
alias_5:
dec si ;Backup to 1st character
inc cx
call subenvvar ;Substitute an environment var
loop alias_1
alias_6:
mov si,work_buff_ptr ;Point SI to internal buffer
mov cx,di ;Compute size of completed
sub cx,si ; alias.
ret
getalias endp
;-----------------------------------------------------------------------------
; SUBLINEPARAM substitutes a parameter from the command line into the alias.
; Entry: DS:SI - pointer to alias
; ES:DI - pointer to buffer to copy the line parameter
; AH - remaining space in the internal buffer
; BH - binary number of the line parameter
; CX - length of the alias
; Exit: ES:DI - pointer to byte after the parameter in the buffer
; DS:SI - pointer to the character after the line parameter number
; CX - remaining length of the alias
;-----------------------------------------------------------------------------
sublineparam proc near
push cx
push si
push ds
mov si,[bp-4] ;Get pointer to command.com
mov ds,[bp-10] ; data buffer.
xor cx,cx
mov cl,ds:[si+1] ;Get number of chars in buffer.
inc si ;Point to the first byte of
inc si ; data.
sublineparam_1:
or bh,bh ;Check count of param to find.
jz sublineparam_2
mov bl,1
call scan4char ;Find next space
jc sublineparam_exit
dec bl
call scan4char ;Find next word
jc sublineparam_exit
dec bh ;Dec parameter count
jne sublineparam_1 ;If not done, loop back.
dec si ;Backup to 1st char in word.
sublineparam_2:
lodsb ;Get character from parameter
cmp al," " ;If space, parameter done
jbe sublineparam_exit
stosb
dec ah ;Dec buffer size counter
jnz sublineparam_2
sublineparam_exit:
pop ds
pop si
pop cx
ret
sublineparam endp
;-----------------------------------------------------------------------------
; SUBENVVAR substitutes an environment variable into alias.
; Entry: DS:SI - pointer to variable to substitute
; ES:DI - pointer to buffer to copy the contents of the variable
; AH - remaining space in internal buffer
; CX - length of alias string
; Exit: DS:SI - pointer to the byte after the variable name
; ES:DI - pointer to the byte after the variable contents
; CF - set if variable not found
;-----------------------------------------------------------------------------
subenvvar proc near
push dx
push ds
push es
;
;Compute the length of the variable name.
;
mov bx,di ;Save pointer to internal buff
mov di,si ;Compute the length of the
mov dx,cx ; environment variable by
mov al,"%" ; searching for the trailing
repne scasb ; % sign.
sub dx,cx ;Compute length of variable.
dec dx ;Subtract % byte fron length.
push di ;Save ptr to end of env var.
;
;Search the Master Environment block for the variable pointed to by DS:SI
;
mov es,cs:[master_env] ;Get segment of master env blk
xor di,di ;Point ES:DI to environment.
push cx ;Save alias size.
push bx ;Save ptr to internal buffer
mov bx,si ;Save pointer to var name
subenvvar_1:
mov si,bx ;Get back ptr to var name.
mov cx,dx ;Compare env var to var in
repe cmpsb ; alias.
je subenvvar_2 ;Variable found, exit loop
xor al,al ;Find next environment var.
mov cx,-1 ;Scan the entire segment.
repne scasb
cmp byte ptr es:[di],0 ;If double zero, end of env
jne subenvvar_1 ; block. else, loop back.
pop di ;Restore DI and exit
jmp short subenvvar_exit
;
;Environment variable found. Substitute into alias.
;
subenvvar_2:
mov si,es ;DS:SI points to env string
mov ds,si ;ES:DI points to internal buff
mov si,cs
mov es,si
mov si,di ;Copy pointer to var contents.
pop di ;Restore ptr to internal buff
subenvvar_3:
lodsb ;Move environment pointer past
cmp al,"=" ; the equals sign.
jne subenvvar_3
subenvvar_4:
lodsb ;Move pointer to first
cmp al," " ; non-space character.
jb subenvvar_4
subenvvar_5:
or al,al ;See if at the end of variable
je subenvvar_exit
stosb ;Save character in command
lodsb ;Get next character
dec ah ;Dec buffer size count.
jne subenvvar_5 ;If buffer not full, continue
subenvvar_exit:
pop cx ;Restore alias length
pop si ;Restore alias pointer
pop es ;Restore segment registers
pop ds
pop dx
ret
subenvvar endp
;-----------------------------------------------------------------------------
; SUBKEY searches the alias list for a key substitution
; Entry: AL - extended key code
; Exit: CF - clear if key found, set if not found
; DX - offset address of matching entry in alias list (if CF = 0)
; CX - length of matching entry (if CF = 0)
;-----------------------------------------------------------------------------
subkey proc near
push bx
push di
push si
push ds
push es
xor ah,ah ;Indicate extended code.
les di,cs:[aliaslist_ptr] ;Get pointer to alias list.
subkey_1:
mov dx,es:[di] ;Get next entry offset
cmp dx,-1 ;See if at the end of the list
je subkey_notfound
cmp es:[di+4],ax ;Check for key code.
je subkey_found ;If found, exit loop
subkey_2:
add di,dx ;Else, point to next entry.
jmp short subkey_1
;
;Copy alias into internal buffer.
;
subkey_found:
mov si,di ;Load SI with alias pointer
mov ax,es
mov ds,ax ;Point DS to alias list seg
xor cx,cx
mov cl,ds:[si+3] ;Get size of alias
call getalias ;Get alias from list
mov dx,si ;Copy pointer to buffer
clc ;Set key found flag
subkey_exit:
pop es
pop ds
pop si
pop di
pop bx
ret
subkey_notfound:
stc ;Set key not found flag
jmp subkey_exit
subkey endp
;-----------------------------------------------------------------------------
; SEARCHALIAS searches the alias list for a matching alias.
; Entry: DS:SI - pointer to alias
; ES - segment of installed code
; CX - length input buffer
; Exit: CF - clear if alias found
; ES:DI - pointer to matching entry in alias list, if CF is clear
;-----------------------------------------------------------------------------
searchalias proc near
push bx ;Save registers
push cx
push si
xor bx,bx
searchalias_1:
lodsb ;Compute the length of the
or al,al ; length of the alias by
je searchalias_2 ; finding the next space.
cmp al," " ;Allow zero byte in alias
jbe searchalias_3 ; for function key labels.
searchalias_2:
inc bx
loop searchalias_1
searchalias_3:
pop si
les di,es:[aliaslist_ptr] ;Get pointer to alias list.
mov cx,bx ;Get length of alias
searchalias_4:
mov bx,es:[di]
cmp bx,-1 ;See if at the end of the list
je searchalias_notfound
cmp es:[di+2],cl ;Compare lengths
jne searchalias_5
push cx ;Save size and starting
push di ; pointers.
push si
add di,4 ;Point to start of alias field.
repe cmpsb ;Compare alias to input string
pop si
pop di
pop cx
je searchalias_6 ;If found, exit loop
searchalias_5:
add di,bx ;Else, point to next entry.
jmp short searchalias_4
searchalias_6:
clc ;Set alias found flag
searchalias_exit:
pop cx
pop bx
ret
searchalias_notfound:
stc
jmp short searchalias_exit
searchalias endp
;-----------------------------------------------------------------------------
; SCAN4CHAR scans a string to find the first character.
; Entry: SI - pointer to ASCII string
; BL - 0 = find next char, 1 = find next space
; CX - file length
; Exit: AL - first nonspace character
; CF - set if carriage return found
;-----------------------------------------------------------------------------
scan4char proc near
assume ds:nothing,es:nothing
scan4loop:
jcxz scan4_eol ;See if at the end of the file.
lodsb
dec cx ;Decrement file length counter.
cmp al,13 ;Check for carriage return.
jne scan4_1
scan4_eol:
stc
jmp short scan4_exit1
scan4_1:
or bl,bl ;Check if searching for space
jne scan4_2 ; or character.
cmp al," " ;Check for space or other
jbe scan4loop ; 'white' characters.
jmp short scan4_exit
scan4_2:
cmp al," " ;Check for characters.
ja scan4loop
scan4_exit:
clc
scan4_exit1:
ret
scan4char endp
;----------------------------------------------------------------------------
; CMD_INPUT replaces DOS' 0Ah text input function.
;----------------------------------------------------------------------------
cmd_input proc near
push ds ;Save DS
xor ax,ax ;Then zero it
mov ds,ax
mov ax,ds:[0485h] ;Get number of scan lines
cmp ax,cs:[points] ; per character and branch
je cmd1 ; if it hasn't changed
mov cs:[points],ax ;Record new number of scan
mov ax,ds:[0460h] ; lines per character and
mov cs:[cursor_mode],ax ; cursor mode
cmd1:
pop ds ;Restore DS
call set_cursor ;Set cursor mode
mov ah,15 ;Get video page and columns
int 10h
dec ah ;Calculate max column number
mov cs:[columns],ah ;Save it
mov ax,ds ;Point ES:DI to buffer
mov es,ax
mov di,dx
add di,2
mov si,dx ;Point DS:SI to character count
inc si
mov byte ptr [si],0 ;Zero initial count
mov cs:[bufferptr],1 ;Set initial index value
cld ;Clear DF
;
;Wait for a keycode to appear in the keyboard buffer.
;
getkey: mov ah,0Bh ;Check buffer for keycode
int 21h
or al,al ;Anything there?
jne getchar ;Yes, then go get it
int 28h ;No, then execute interrupt 28h
jmp getkey ;Loop back for another try
;
;Read the keycode and process it if it's not an extended code.
;
getchar:
mov ah,8 ;Read character from buffer
int 21h
or al,al ;Is it an extended code?
je excode ;Yes, then branch
cmp al,8 ;Backspace key?
jne getc1 ;No, then branch
call backspace ;Rub out a character
jmp getkey ;Return to loop
getc1:
cmp al,9 ;Tab key?
jne getc2 ;No, then branch
call tab ;Tab to next tab boundary
jmp getkey ;Return to loop
getc2:
cmp al,27 ;ESC key?
jne getc3 ;No, then branch
call clear_line ;Yes, then clear input line
mov cs:[cmd_ptr],0 ;Zero current command pointer
jmp getkey
getc3:
cmp al,7Fh ;Ctrl-Backspace?
jne getc4 ;No, then branch
call ctrl_bs ;Yes, then delete word
jmp getkey
getc4:
cmp al,13 ;ENTER key?
je entr ;Yes, then branch
call printchar ;No, then print the character
getc5:
jmp getkey
entr:
call eol ;Place cursor at end-of-line
mov byte ptr es:[di],13 ;Insert carriage return code
mov ah,2 ;Advance to next line
mov dl,13
int 21h
get_exit:
ret
;
;Process extended keycodes.
;
excode:
mov ah,8 ;Read extended code
int 21h
cmp al,3Bh ;See if below F1
jb excode3
cmp al,71h ;See if above Alt-F10
ja excode3
cmp al,54h ;See if above Shift-F1
jae excode1
cmp al,44h ;See if above F10
ja excode3
excode1:
call subkey ;Scan alias list for match
jc getkey ;Exit if no match found
push cx
push dx
call clear_line ;Clear command line
pop dx
pop cx
excode2:
push si
mov si,dx ;Copy offset address into SI
mov al,byte ptr cs:[si] ;Get next character
pop si
cmp al,13 ;Exit and execute command
je entr ; on carriage return
inc dx
push cx
push dx
call printchar ;Print it
pop dx
pop cx
jc getc5
loop excode2 ;Loop until done
jmp getkey ;Return to input loop
excode3:
push es ;Save buffer address
push di
mov cx,cs ;Point ES:DI to list of
mov es,cx ; supported keycodes
mov di,offset exkeys
mov cx,offset exkeys_end - offset exkeys
repne scasb ;Scan list
pop di ;Clear the stack
pop es
jne excode4 ;Ignore if key not found
shl cx,1 ;Convert CX to address
add cx,offset ex_entry
push bx ;Save page number in BH
mov bx,cx ;Get entry address from table
mov ax,cs:[bx]
pop bx ;Restore BH
call ax ;Call handling routine
excode4:
jmp getkey ;Return to input loop
cmd_input endp
;------------------------------------------------------------------------------
; PREV_CMD outputs the previous command in the command stack.
;------------------------------------------------------------------------------
prev_cmd proc near
mov dx,cs:[cmd_ptr] ;Get current stack index
cmp dx,cs:[cmdstack_size] ;Exit if at top of command
je prev_exit ; stack
or dx,dx ;Branch if not at bottom of
jnz prev1 ; command stack
;
;Copy the current contents of the command line to the search buffer.
;
mov cl,[si] ;Get count of characters on
xor ch,ch ; command line in CX
inc cx
push es ;Save registers
push di
push si
mov ax,cs ;Point ES:DI to search text
mov es,ax ; buffer
mov di,offset command_tail
rep movsb ;Copy command line text
pop si ;Restore registers
pop di
pop es
;
;Search for the previous command and output it.
;
prev1:
inc dx ;Increment stack index
mov ax,cs:[next_ptr] ;Get stack base index
sub ax,dx ;Calculate address of previous
cmp ax,0 ; command
jge prev2
add ax,cs:[cmdstack_size]
prev2:
mov cl,7 ;Calculate offset address of
shl ax,cl ; the command
add ax,cs:[cmdstack_base]
cmp byte ptr cs:[command_tail],0 ;Output command if there is
je prev3 ; no search criterion
call check_string ;Compare strings
jz prev3 ;Output command if the strings
cmp dx,cs:[cmdstack_size] ; match
jne prev1
ret ;Exit if at top of stack
prev3:
push si ;Save SI
mov si,ax ;Transfer address to SI
cmp byte ptr cs:[si],0 ;Valid command?
pop si ;Restore SI
je prev_exit ;No, then ignore keypress
mov cs:[cmd_ptr],dx ;Save new command pointer
call write_command ;Output the command string
prev_exit:
ret
prev_cmd endp
;------------------------------------------------------------------------------
; NEXT_CMD outputs the next command in the command stack.
;------------------------------------------------------------------------------
next_cmd proc near
mov dx,cs:[cmd_ptr] ;Get current stack index
or dx,dx ;Exit if it's zero
jz next_exit
next1:
dec dx ;Decrement stack index
mov cs:[cmd_ptr],dx ;Save command pointer
or dx,dx ;Clear line and exit if
jz next3 ; the result is zero
mov ax,cs:[next_ptr] ;Get stack base index
sub ax,dx ;Calculate address of next
cmp ax,0 ; command
jge next2
add ax,cs:[cmdstack_size]
next2:
mov cl,7 ;Calculate offset address of
shl ax,cl ; command
add ax,cs:[cmdstack_base]
cmp byte ptr cs:[command_tail],0 ;Output command if there is
je next4 ; no search criterion
call check_string ;Compare strings
jz next4 ;Output command if the strings
jmp next1 ; match
next3:
call clear_line
cmp byte ptr cs:[command_tail],0
je next_exit
mov ax,offset command_tail
next4:
call write_command ;Output the command string
next_exit:
ret
next_cmd endp
;------------------------------------------------------------------------------
; CHECK_STRING compares the string in the search buffer with another string.
; Entry: AX - string address
; Exit: ZF - set if strings are equivalent, clear if they are not
;------------------------------------------------------------------------------
check_string proc near
push ds ;Save registers
push si
push es
push di
mov cx,cs ;Point DS and ES to
mov ds,cx ; code segment
mov es,cx
mov si,offset command_tail ;Point DS:SI to text in
mov cl,[si] ; search buffer
xor ch,ch
inc si
mov di,ax ;Point DI to other string
inc di ;
repe cmpsb ;Compare strings
pop di ;Restore registers
pop es
pop si
pop ds
ret
check_string endp
;------------------------------------------------------------------------------
; PRINT_STRING writes an ASCII string to the command line.
; Entry: DS:SI - string address
; CX - number of characters
;------------------------------------------------------------------------------
print_string proc near
jcxz ps_exit ;Exit if no characters
push dx
cld
mov ah,2 ;Print the character
ps1:
lodsb ;Get a byte
mov dl,al ;Transfer it to DL
int 21h ;Output character
loop ps1 ;Loop until done
pop dx
ps_exit:
ret
print_string endp
;------------------------------------------------------------------------------
; WRITE_COMMAND outputs a command string.
; Entry: AX - string offset address
; Exit: AL - character after string
;------------------------------------------------------------------------------
write_command proc near
push ax ;Save address
call clear_line ;Clear input line
pop ax ;Retrieve string address
push ds ;Save DS and SI
push si
push cs ;Point DS to string segment
pop ds
mov si,ax ;Point SI to the string
mov cl,[si] ;Get string length
xor ch,ch
mov byte ptr es:[di-1],cl ;Store string length
inc si ;Advance SI to string text
write1:
mov ah,2 ;Print one character
mov dl,[si]
int 21h
movsb ;Transfer character to buffer
inc cs:[bufferptr] ;Advance pointer
loop write1 ;Loop until done
lodsb ;Get first character after string
pop si ;Restore registers
pop ds
ret
write_command endp
;------------------------------------------------------------------------------
; TOGGLE_INS toggles the insert flag.
;------------------------------------------------------------------------------
toggle_ins proc near
xor cs:[insert_flag],1 ;Toggle insert flag
call set_cursor ;Set cursor mode
ret
toggle_ins endp
;------------------------------------------------------------------------------
; TAB tabs to the next tab boundary.
;------------------------------------------------------------------------------
tab proc near
mov al,cs:[bufferptr] ;Calculate number of
dec al ; spaces to insert for
xor ah,ah ; soft tab
mov bl,8
div bl
mov cx,8
sub cl,ah
tab1:
push cx ;Print spaces
mov al,32
call printchar
pop cx
jc tab_exit
loop tab1
tab_exit:
ret
tab endp
;------------------------------------------------------------------------------
; BACKSPACE deletes the character left of the cursor.
;------------------------------------------------------------------------------
backspace proc near
cmp cs:[bufferptr],1 ;At beginning of command line?
je bs_exit ;Yes, then ignore it
mov cl,[si] ;Get count
sub cl,cs:[bufferptr] ;Calculate distance to end-of-line
inc cl
xor ch,ch
push cx ;Save it
jcxz bs1 ;Branch if at end-of-line
;
;Shift all characters right of the cursor in the buffer one slot left.
;
push si ;Save SI and DI
push di
mov si,di ;Position them for shifts
dec di
rep movsb ;Shift characters right of cursor
pop di ;Restore registers
pop si
;
;Display the new string and update input parameters.
;
bs1:
call move_left ;Move cursor left
bs2:
pop cx ;Retrieve shift count
push dx ;Save cursor position
push si ;Save SI
mov si,di ;Point SI to new part of string
call print_string ;Print the new part
mov ah,2 ;Blank the last character
mov dl,32
int 21h
pop si ;Restore registers
pop dx ;Restore cursor address
mov ah,2 ;Reset the cursor
int 10h
dec byte ptr [si] ;Decrement character count
bs_exit:
ret
backspace endp
;------------------------------------------------------------------------------
; PRINTCHAR writes a new character to the input buffer and echoes it.
; Entry: AL - character to print
; Exit: CF clear if character printed
; CF set if buffer full
;------------------------------------------------------------------------------
printchar proc near
cmp cs:[insert_flag],0 ;Insert state on?
jne print3 ;Yes, then branch
;
;Print a character in overstrike mode.
;
mov cl,[si] ;Get count
cmp cl,cs:[bufferptr] ;End-of-line?
jae print2 ;No, then branch
mov cl,[si-1] ;Get maximum length
sub cl,[si] ;Subtract current length
cmp cl,1 ;Buffer full?
je beep ;Yes, then branch
print1:
inc byte ptr [si] ;Increment count
print2:
stosb ;Deposit new character
mov ah,2 ;Then print it
mov dl,al
int 21h
inc cs:[bufferptr] ;Advance buffer pointer
print_exit:
clc ;Clear CF and exit
ret
beep:
mov ax,0E07h ;Print ASCII 7 thru BIOS
int 10h
stc
ret
;
;Print a character in insert mode.
;
print3:
mov cl,[si-1] ;Get maximum length
sub cl,[si] ;Subtract current count
cmp cl,1 ;Buffer full?
je beep ;Yes, then branch
mov cl,[si] ;Get count
cmp cl,cs:[bufferptr] ;End-of-line?
jb print1 ;Yes, then branch
sub cl,cs:[bufferptr] ;Calculate number of shifts
inc cl
xor ch,ch
push cx ;Save shift count
push si ;Save SI
add di,cx ;Position DI to end-of-line
mov si,di ;Position SI just before it
dec si
std ;Set DF for now
rep movsb ;Make room for new character
cld ;Clear DF
pop si ;Restore SI
mov es:[di],al ;Deposit new character
mov ah,3 ;Get cursor position
int 10h
pop cx ;Retrieve shift count
inc cx ;Increment it
push dx ;Save cursor position
push si ;Save SI
mov si,di ;Point SI to current location
call print_string ;Print new part of string
pop si ;Restore SI and DX
pop dx
mov ah,2 ;Reset cursor position
int 10h
inc byte ptr [si] ;Add to character count
call move_right ;Move cursor right
jmp print_exit
printchar endp
;------------------------------------------------------------------------------
; DELETE deletes the character at the cursor.
;------------------------------------------------------------------------------
delete proc near
mov cl,[si] ;Get count
cmp cl,cs:[bufferptr] ;End-of-line?
jb del2 ;Yes, then ignore keypress
sub cl,cs:[bufferptr] ;Calculate number of shifts
xor ch,ch ;Byte to word in CX
push cx ;Save shift count
jcxz del1 ;Branch if no shifts
push si ;Save SI and DI
push di
mov si,di ;Position registers for shift
inc si
rep movsb ;Shift chars right of cursor
pop di ;Restore registers
pop si
del1:
mov ah,3 ;Get cursor position
int 10h
jmp bs2 ;Exit thru BACKSPACE routine
del2:
ret
delete endp
;------------------------------------------------------------------------------
; CTRL_BS deletes the word at the cursor.
;------------------------------------------------------------------------------
lesschars dw ? ;Count of chars deleted
shiftcount dw ? ;Count of chars shifted
ctrl_bs proc near
mov cl,[si] ;Exit now if there is nothing
xor ch,ch ; on the command line
or cx,cx
jnz cbs1
cbs_exit:
ret
cbs1:
cmp cs:[bufferptr],1 ;Exit if the cursor is at the
je cbs3 ; at the end of the command
cmp cl,cs:[bufferptr] ; line or if it is under a
jb cbs_exit ; space; otherwise, move to
cmp byte ptr [di],32 ; the beginning of the
je cbs_exit ; current word
cmp byte ptr [di-1],32
je cbs3
cbs2:
push cx ;Save CX
call ctrl_left ;Move to start of word
pop cx ;Restore CX
cbs3:
inc cx ;Calculate max number of
push cx ; characters to search
mov dl,cs:[bufferptr] ; looking for the next
xor dh,dh ; word or end-of-line
sub cx,dx
push di ;Save DI
cbs4:
inc di ;Search until DI addresses
cmp byte ptr [di],32 ; either the first character
je cbs5 ; in the next word or the
cmp byte ptr [di-1],32 ; end of the command line
je cbs6
cbs5:
loop cbs4
cbs6:
mov dx,di ;Save final value of DI
pop di ;Restore DI
pop cx ;Retrieve count
mov cs:[lesschars],dx ;Calculate number of chars to
sub cs:[lesschars],di ; be deleted
sub cx,dx ;Then calculate how many chars
add cx,si ; must be shifted
mov cs:[shiftcount],cx
jcxz cbs7 ;Branch if no shift
push si ;Save registers
push di
mov si,dx ;Point DS:SI to next word
rep movsb ;Delete current word
pop di ;Restore registers
pop si
cbs7:
mov cx,cs:[lesschars] ;Update character counter
sub [si],cl ; in input buffer
mov ah,3 ;Save the current cursor
int 10h ; position on the stack
push dx
push si ;Update the text on the
mov si,di ; command line
mov cx,cs:[shiftcount]
call print_string
pop si
mov cx,cs:[lesschars]
cbs8:
mov ah,2 ;Print as many spaces as
mov dl,32 ; there were characters
int 21h ; deleted
loop cbs8
pop dx ;Restore cursor position
mov ah,2 ; and exit
int 10h
ret
ctrl_bs endp
;------------------------------------------------------------------------------
; CTRL_END deletes command line text from the cursor to the end of the line.
;------------------------------------------------------------------------------
ctrl_end proc near
mov cl,[si] ;Exit if already at end
cmp cl,cs:[bufferptr] ; of line
jb ce_exit
sub cl,cs:[bufferptr] ;Calculate number of chars
xor ch,ch ; to be deleted
inc cx
sub [si],cl ;Update count in input buffer
push cx
mov ah,3 ;Get and save cursor position
int 10h
pop cx
push dx
ce1:
mov ah,2 ;Print as many spaces as
mov dl,32 ; there are characters
int 21h ; to delete
loop ce1
mov ah,2 ;Reset cursor position and
pop dx ; exit
int 10h
ce_exit:
ret
ctrl_end endp
;------------------------------------------------------------------------------
; MOVE_LEFT moves the cursor one character left.
;------------------------------------------------------------------------------
move_left proc near
cmp cs:[bufferptr],1 ;At beginning of line?
je left2 ;Yes, then ignore keypress
mov ah,3 ;Get cursor position
int 10h
dec dl ;Decrement it by 1
cmp dl,0FFh
jne left1
mov dl,cs:[columns] ;Decrement row number by 1
dec dh ; if cursor wraps around
left1:
mov ah,2 ;Set new position
int 10h
dec di ;Decrement pointers
dec cs:[bufferptr]
left2:
ret
move_left endp
;------------------------------------------------------------------------------
; MOVE_RIGHT moves the cursor one character right.
;------------------------------------------------------------------------------
move_right proc near
mov cl,[si] ;Get count
cmp cl,cs:[bufferptr] ;End-of-line?
jb rt2 ;Yes, then ignore keypress
mov ah,3 ;Get cursor position
int 10h
inc dl ;Increment column number
cmp dl,cs:[columns] ;Increment row number if
jna rt1 ; cursor wraps around
xor dl,dl
inc dh
rt1:
mov ah,2 ;Position cursor
int 10h
inc di ;Advance pointers
inc cs:[bufferptr]
rt2:
ret
move_right endp
;------------------------------------------------------------------------------
; CTRL_LEFT moves the cursor one word left.
;------------------------------------------------------------------------------
ctrl_left proc near
call move_left ;Move one character left
cmp cs:[bufferptr],1 ;Beginning of line?
je cl_exit ;Yes, then exit
cmp byte ptr es:[di],32 ;Loop back if current char
je ctrl_left ; is a space
cmp byte ptr es:[di-1],32 ;Loop back if char to the
jne ctrl_left ; left is not a space
cl_exit:
ret
ctrl_left endp
;------------------------------------------------------------------------------
; CTRL_RIGHT moves the cursor one word right.
;------------------------------------------------------------------------------
ctrl_right proc near
call move_right ;Move one character right
mov cl,[si] ;End-of-line?
cmp cl,cs:[bufferptr] ;Yes, then exit
jb cr_exit
cmp byte ptr es:[di],32 ;Loop back if current char
je ctrl_right ; is a space
cmp byte ptr es:[di-1],32 ;Loop back if char to the
jne ctrl_right ; left is not a space
cr_exit:
ret
ctrl_right endp
;------------------------------------------------------------------------------
; HOME relocates the cursor to the beginning of the command line.
;------------------------------------------------------------------------------
home proc near
mov cl,cs:[bufferptr] ;Get position pointer
dec cl ;Calculate distance from start
xor ch,ch
jcxz home_exit ;Exit if already there
home1:
push cx ;Save count
call move_left ;Move left one space
pop cx ;Retrieve count
loop home1 ;Loop until done
home_exit:
ret
home endp
;------------------------------------------------------------------------------
; EOL advances the cursor to the end of the command line.
;------------------------------------------------------------------------------
eol proc near
mov cl,[si] ;Get count
cmp cl,cs:[bufferptr] ;Already at end?
jb eol_exit ;Yes, then exit
sub cl,cs:[bufferptr] ;Calculate distance from end
inc cl
xor ch,ch ;Byte to word in CX
eol1:
push cx ;Advance right CX times
call move_right
pop cx
loop eol1
eol_exit:
ret
eol endp
;------------------------------------------------------------------------------
; CLEAR_LINE clears the command line.
; Entry: BH - current video page
;------------------------------------------------------------------------------
clear_line proc near
mov cl,[si] ;Get count
xor ch,ch
jcxz cline2 ;Exit if no characters
push cx ;Save count
call home ;Home the cursor
mov ah,3 ;Get cursor position
int 10h
pop cx ;Restore CX
push dx ;Save cursor address
mov ah,2 ;Print ASCII spaces
mov dl,32
cline1:
int 21h
loop cline1
mov ah,2 ;Home cursor again
pop dx
int 10h
mov byte ptr [si],0 ;Reset count
cline2:
ret
clear_line endp
;------------------------------------------------------------------------------
; CMD_RECORD records the latest command in the command stack.
; Entry: DS:DX - input buffer address
;------------------------------------------------------------------------------
cmd_record proc near
mov si,dx ;Point SI to input buffer
mov al,[si+1] ;Get length of input string
cmp al,cs:[minlength] ;Is the length zero?
jb cmd_exit ;Yes, then exit now
inc si ;Advance SI to count byte
push cs ;Point ES to command stack
pop es ; segment
mov di,cs:[next_ptr] ;Get command stack pointer
mov cl,7 ;Convert it to offset address
shl di,cl
add di,cs:[cmdstack_base]
mov cl,al ;Transfer string length to CL
inc cl ;Increment for count byte
xor ch,ch ;Byte to word in CX
cld ;Clear DF
rep movsb ;Copy string to command stack
inc cs:[next_ptr] ;Update pointer
mov ax,cs:[cmdstack_size]
cmp cs:[next_ptr],ax ;Wrap around if necessary
jne cmdrec1
mov cs:[next_ptr],0
cmdrec1:
mov cs:[cmd_ptr],0 ;Zero current command pointer
cmd_exit:
ret
cmd_record endp
;------------------------------------------------------------------------------
; SET_CURSOR sets the cursor mode based on the state of the insert flag.
;------------------------------------------------------------------------------
set_cursor proc near
cmp cs:[insert_flag],0 ;Test state of insert flag
je setc1 ;Branch if not set
mov cx,cs:[cursor_mode] ;Raise top by 2 scan lines
sub ch,2
jns setc2 ;Exit if it wraps around
ret
setc1:
mov cx,cs:[cursor_mode] ;Set default cursor
setc2:
mov ah,1 ;Set cursor mode
int 10h
ret
set_cursor endp
;============================================================================
; MUXINT processes calls to interrupt 2Fh
; Entry: AH - Device ID
; Exit: AL - 0FFh if AH = Alias device ID. Unchanged otherwise.
; ES - Code segment if AH = Alias device ID. Unchanged otherwise.
;============================================================================
muxint proc far
assume cs:code,ds:nothing,es:nothing
cmp ah,cs:[multiplex_id] ;Check for program ID
je muxint_1 ;Its us, indicate installed.
jmp cs:[int2fh] ;else pass the call on
muxint_1:
mov al,-1 ;Indicate Alias installed
push cs ;ES = installed code segment
pop es
iret
muxint endp
even ;Align stack on word boundry
end_of_resident = $
;----------------------------------------------------------------------------
; Start of non-resident code.
;----------------------------------------------------------------------------
final_install:
rep movsb ;Copy alias list
mov di,cmdstack_base ;Initialize command stack
mov cx,cmdstack_size ; area with leading zeroes
jcxz tsr ;Branch if size is zero
xor al,al
cld
final_loop:
stosb
add di,127
loop final_loop
tsr:
mov ax,3100h ;Terminate and stay resident
int 21h
;----------------------------------------------------------------------------
; Non-resident data.
;----------------------------------------------------------------------------
alrdy_installed db 0 ;Installed flag
other_seg dw 0 ;Segment of installed code
databuff_seg dw 0 ;Segment of data buffer.
alias_buffer dw 512 ;Extra buffer for alias list.
aliaslist_end dw 0 ;Offset of end of the list.
alias_inlist db 0 ;Flag used in alias list append
infomsg1 db "ALIAS uninstalled$"
infomsg2 db 13,10,9,"Command stack size: $"
infomsg3 db 13,10,9,"Minimum stacked command length: $"
infomsg4 db 13,10,9,"Bytes free in alias buffer: $"
infomsg5 db 13,10,9,"Alias translation is $"
infomsg5d db "disabled",13,10,"$"
infomsg5e db "enabled",13,10,"$"
infomsg6 db 13,10,9,"FUNCTION KEY DEFINITIONS$"
infomsg7 db 13,10,9,"ALIAS DEFINITIONS$"
infomsg8 db 13,10,"For help type ALIAS ?$"
infomsg9 db 13,10,"Can",39,"t find Master Env. block$"
filemsg1 db 13,10,"Error in line $" ;File identification message.
filemsg2 db " of file: "
filenam_field db 78 dup (0) ;Name of current entry file.
errmsg0 db "Need DOS 2.0 or greater$"
errmsg1 db "ALIAS not installed$"
errmsg2 db 13,10,"Syntax: ALIAS [alias [command]] "
db "[/F filename] [/S nn] [/U]",13,10
db 14 dup (" ")
db "[/B nn] [/D] [/E] [/L] [/M]",13,10,10
db 9,"ALIAS alias command",13,10
db 9,"ALIAS [fn] command",13,10,10
db 9,"/B = Buffer size",13,10
db 9,"/D = Disable alias translation",13,10
db 9,"/E = Enable alias translation",13,10
db 9,"/F = Filename of command file",13,10
db 9,"/L = List aliases",13,10
db 9,"/M = Minimum command length to stack",13,10
db 9,"/S = Size of command stack",13,10
db 9,"/U = Uninstall",13,10,"$"
errmsg3 db "Can",39,"t uninstall$"
errmsg4 db "Can",39,"t change parameter after installation$"
errmsg5 db "Illegal number$"
errmsg6 db "Can",39,"t find alias file$"
errmsg7 db "Can",39,"t find COMMAND.COM$"
errmsg8 db "Not enough memory$"
errmsg9 db "Alias list full$"
errmsg10 db "List and stack too large$"
errmsg11 db "Invalid key assignment$"
errmsg12 db "Number too big$"
errmsg13 db "Alias not in list$"
errmsg14 db "Error using Int 2Fh$"
endmsg db 13,10,"$"
shiftmsg db "S-$"
altmsg db "A-$"
ctlmsg db "C-$"
file_linecount dw 0 ;Line number being processed.
caps_flag db 0
param_found db 0 ;Cmd line parameter found flag
append_cr db 0 ;Append cr to alias flag
cmdcom_name db "COMMAND" ;Name of command.com
cmd_switches db "sfeldbum*/" ;Letters of valid commands.
cmd_switch_end = $
cmd_jmp_tbl dw offset setstacksize ;This jump table is used to
dw offset loadaliasfile ; call the routines that
dw offset enablealias ; process the command line
dw offset listalias ; arguments
dw offset disablealias
dw offset setlistbuffer
dw offset remove
dw offset minstacklen
dw offset comment_line ;Comments can be indicated by
dw offset comment_line ; a /* or a //.
;----------------------------------------------------------------------------
; Initialization routine.
;----------------------------------------------------------------------------
initialize proc near
assume cs:code,ds:code,es:code
cld
mov ah,30h ;Get DOS version
int 21h
xchg al,ah ;Swap major, minor numbers
mov dx,offset errmsg0 ;Bad DOS version
cmp ah,2 ;Run if DOS 2.0 or greater.
jb jmp_disp_error
mov dos_version,ax ;Save version number
mov ax,max_code_size ;Get size of installed code.
mov bx,ax
shl ax,1 ;Convert to bytes
shl ax,1
shl ax,1
shl ax,1
mov sp,ax ;Move stack pointer
sub ax,512 ;Save room for stack
mov aliaslist_size,ax ;Mark end of alias list
mov ah,4ah ;Reduce memory allocation
int 21h
mov bx,filebuf_size ;Get size of file buffer,
mov ah,48h ;Allocate memory block
int 21h
mov dx,offset errmsg8 ;Not enough memory msg
jc jmp_disp_error
mov databuff_seg,ax ;Save segment to file buffer.
mov ax,offset end_of_code ;Initialize alias list
mov word ptr [aliaslist_ptr],ax ; pointers.
mov ax,cs
mov word ptr [aliaslist_ptr+2],ax
les di,aliaslist_ptr ;Initialize alias list
mov ax,-1 ; by writing a -1 as
stosw ; an end flag.
mov aliaslist_end,di
;
;See if a copy is already resident in memory. If > DOS 3.0, use int 2Fh.
;
mov byte ptr [main+2],0 ;Initialize fingerprint
cmp dos_version,300h ;See if DOS 3.0 or later
jb find_copy1 ;No, search the old way.
mov cx,16 ;Try 16 different IDs.
find_copy:
xor ax,ax
mov es,ax
mov ah,multiplex_id ;Load ID. Use Int 2Fh to
int 2fh ; reach installed code so
or al,al ; that we are compatible
jne find_copy0 ; with 386 memory managers.
push cs
pop es ;If AL not changed, ALIAS not
jmp short find_copy4 ; installed.
find_copy0:
push cx
call cmpheader ;See if really Alias by
pop cx ; comparing file headers.
je find_copy3
inc multiplex_id ;ID used by another program.
loop find_copy ; Change and try again.
mov dx,offset errmsg14 ;All IDs taken, print error
jmp_disp_error:
jmp disp_error ; msg and exit.
;
;For DOS 2.x find the installed code the old fashioned way by scanning
;the memory control blocks.
;
find_copy1:
xor bx,bx ;zero BX for start
mov ax,cs ;keep CS value in AX
find_copy2:
inc bx ;increment search segment value
mov es,bx
assume es:nothing
cmp ax,bx ;not installed if current
je find_copy4 ; segment is found.
call cmpheader
jne find_copy2 ;loop back if not found
find_copy3:
inc alrdy_installed ;Set installed flag
find_copy4:
mov other_seg,es ;Save seg of installed code
;
;Copy the command line to the file buffer to treat as a one line file.
;
mov ax,databuff_seg ;Get segment of file buffer.
mov es,ax ;Treat the command line as
xor di,di ; a 1 line file.
mov si,offset command_tail
xor cx,cx
or cl,[si] ;Get command line length
je parse_line_end ;If zero, skip parse routine
inc si ;Copy command line into file
inc cx ; buffer.
push cx
rep movsb
pop cx ;CX = file size.
xor si,si ;Point SI to start of buffer
push es
pop ds ;Set DS to file buffer seg
assume ds:nothing
mov es,cs:[other_seg] ;Set ES to installed code
;
;Parse command line and command files.
;
parse_line_loop:
xor bl,bl
call scanline ;Get 1st character
jc parse_2 ;If carriage return, skip line
cmp al,"/" ;Compare character to switch.
je parse_switch_found
cmp al,"?" ;See if help character
mov dx,offset errmsg2 ;Command not found msg
je disp_error
call setkey ;Must be alias definition
jc disp_error
mov param_found,1 ;Set parameter found flag
jmp short parse_2 ;Return to parse loop
parse_switch_found:
mov param_found,1 ;Set parameter found flag
lodsb ;Get command line switch
dec cx
cmp al,'A' ;Convert to lower case if
jb parse_1 ; necessary.
cmp al,'Z'
ja parse_1
or al,20h
parse_1:
push cx ;Scan the list of allowable
push es ; command switches. If switch
push cs ; found, use its position for
pop es ; an index into the list of
mov di,offset cmd_switches ; routines.
mov cx,offset cmd_switch_end - offset cmd_switches
mov bx,offset cmd_switch_end - offset cmd_switches - 1
repne scasb
mov ax,cx ;Copy index into list
pop es
pop cx
mov dx,offset errmsg2 ;Command not found msg
jne disp_error
sub bx,ax ;Compute offset into list
shl bx,1 ;Convert to word offset
add bx,offset cmd_jmp_tbl ;Add the start addr of table.
call cs:[bx] ;Call command routine.
jc disp_error ;If error terminate parse.
parse_2:
jcxz parse_line_end ;If at file end, exit parse.
jmp short parse_line_loop
;
;See if installed. If not, install.
;
parse_line_end:
cmp cs:[param_found],1 ;See if any parameters found
je init2 ;If already installed and
cmp cs:[alrdy_installed],0 ; no parameters on the
je init2 ; command line, default to
mov es,cs:[other_seg] ; showing program information
call listalias
init2:
mov ah,49h ;Release memory block used
mov es,cs:[databuff_seg] ; for file buffer.
int 21h
push cs
pop ds
assume ds:code
mov word ptr databuff_seg,0 ;Indicate file buff released
cmp alrdy_installed,0 ;If not already installed,
je install ; jump to install routine.
exit:
mov ax,4C00h ;Terminate with RC = 0
int 21h
;
;Display error message.
;
assume ds:nothing
disp_error:
xor ax,ax ;If file buffer still
or ax,databuff_seg ; allocated, deallocate it.
jz disp_error0
mov ah,49h ;Release memory block used
mov es,ax ; for file buffer.
int 21h
disp_error0:
push cs
pop ds
assume ds:code
cmp byte ptr filenam_field,0
je disp_error1 ;If processing a file, print
push dx ; a message informing the
mov dx,offset filemsg1 ; user the filename being
call printmsg ; processed and the line
mov ax,file_linecount ; that the error occured.
call hex2asc
mov dx,offset filemsg2
call printmsgcr
pop dx
disp_error1:
call printmsgcr ;print string
mov ax,4c01h ;Terminate with RC = 1
int 21h
;
;Install routine. Find segment of COMMAND.COM, hook into int 21h, 2Fh and TSR.
;
assume ds:code
install:
mov dx,offset program ;Display copyright message
call printmsg
push ds ;Save DS
xor ax,ax ;Then zero it
mov ds,ax
mov cs:[points],ax ;Record number of scan lines
mov ax,ds:[0460h] ; per character and cursor
mov cs:[cursor_mode],ax ; mode
pop ds ;Restore DS
mov byte ptr filenam_field,0 ;Don't callout file on error
mov ah,52h ;get address of first MCB
int 21h
mov ax,es:[bx-2] ;point ES to MCB
mov cx,20 ;Allow only 20 loops.
mcb_loop:
mov es,ax
cmp byte ptr es:[0],"M" ;check for mcb signature
jne mcb_error
inc ax ;point AX to memory block
cmp ax,es:[1] ;See if this is a PSP block
je psp_found
mcb_continue:
add ax,es:[3] ;Get size of memory block
loop mcb_loop
mcb_error:
mov dx,offset errmsg7 ;Can't locate command.com PSP
jmp disp_error
psp_found:
cmp dos_version,0a00h ;If OS/2, use DOS 3.3 method.
jae psp_found_1
cmp dos_version,0400h ;If DOS 4.00 or greater,
jb psp_found_1 ; COMMAND.COM may not be the
push ds ; first program loaded. Look
mov si,offset cmdcom_name ; at the name of the program
mov di,8 ; stored in the last 8 bytes
mov cx,7 ; of the memory control
repe cmpsb ; block. If the string
pop ds ; "COMMAND" isn't found, keep
jne mcb_continue ; looking.
psp_found_1:
mov cmdcom_psp,ax ;Save segment of cmd.com PSP
mov es,ax
mov bx,es:[2ch] ;Get seg of master environment
mov master_env,bx
dec bx
mov es,bx
cmp byte ptr es:[0],"M" ;See if valid memory block
je psp_found_4
mov dx,ax ;Save COMMAND PSP segment
dec ax ;Point back to mcb
mov es,ax
psp_found_2:
add ax,es:[3] ;Get size of memory block
inc ax
cmp es:[1],dx ;See if owned by CMD.COM
je psp_found_3
mov es,ax
loop psp_found_2
mov dx,offset infomsg9 ;Indicate can't find env
call printmsgcr
xor ax,ax
psp_found_3:
inc ax
mov master_env,ax
psp_found_4:
;
;Set up pointers to the cmd stack and to move the alias list to the end of the
;command stack so it takes up less space when ALIAS resident.
;
mov di,mystack_ptr ;Get base of internal stack
mov work_buff_ptr,di ;Copy ptr to alias buffer
add di,128 ;Add size of buffer
mov cmdstack_base,di ;Copy for start of cmd stack
mov ax,cmdstack_size ;Get size of command stack
mov ah,128 ;128 bytes for each entry
mul ah
add di,ax ;Add to cmd stack for
mov si,word ptr aliaslist_ptr ; start of the
mov cx,aliaslist_end ; alias list.
mov word ptr aliaslist_ptr,di ;Save new pointer.
sub cx,si ;Compute size of list.
mov dx,di ;See if we have enough room
add dx,cx ; for everything in one seg.
jnc install_1
mov dx,offset errmsg10 ;Not enough memory, exit.
jmp disp_error
install_1:
add dx,alias_buffer ;Add additional space for list
mov aliaslist_size,dx ;Save pointer to end of seg
add dx,15 ;Convert memory needed to
shr dx,1 ; paragraphs.
shr dx,1
shr dx,1
shr dx,1
cmp di,si ;Check for overlap in the move
jb install_2 ;If overlap, copy list from
std ; the top down to avoid
add di,cx ; overwriting the list.
add si,cx
dec si
dec di
;
;Revector interrupts 21h and 2Fh (if necessary).
;
install_2:
mov ax,3521h ;Get interrupt 21 (DOS)
int 21h ; vector.
mov word ptr [int21h],bx
mov word ptr [int21h+2],es
push dx ;Save memory size parameter
mov ax,2521h ;Point int 21 to internal
mov dx,offset dosint ; routine.
int 21h
cmp dos_version,300h ;See if we are using Int 2Fh
jb install_3
mov ax,352fh ;Get interrupt 2F (MUX)
int 21h ; vector.
mov word ptr [int2fh],bx
mov word ptr [int2fh+2],es
mov ax,252fh ;Point int 2F to internal
mov dx,offset muxint ; routine.
int 21h
install_3:
pop dx
push ds ;ES = DS
pop es
jmp final_install ;Jump to safe place for move.
initialize endp
;-----------------------------------------------------------------------------
; CMPHEADER compares the first 16 bytes of this file with the segment
; pointed to by ES.
; Entry: DS - code segment
; ES - pointer to segment to compare
; Exit: ZF - 0 = segments match.
;-----------------------------------------------------------------------------
cmpheader proc near
mov si,offset main+2 ;Search this segment for ASCII
mov di,si ; fingerprint.
mov cx,16
repe cmpsb
ret
cmpheader endp
;-----------------------------------------------------------------------------
; PRINTMSG prints the message pointed to by DX to the screen.
; Entry: DX - pointer to ASCII message terminated by $
;-----------------------------------------------------------------------------
printmsg proc near
assume ds:nothing,es:nothing
push ds
push cs
pop ds
assume ds:code
mov ah,9 ;Print message
int 21h
pop ds
ret
printmsg endp
;-----------------------------------------------------------------------------
; PRINTMSGCR calls PRINTMSG, then appends a carriage return to the message.
; Entry: DX - pointer to ASCII message terminated by $
;-----------------------------------------------------------------------------
printmsgcr proc near
assume ds:nothing,es:nothing
push dx
call printmsg
mov dx,offset endmsg
call printmsg
pop dx
ret
printmsgcr endp
;-----------------------------------------------------------------------------
; SETSTACKSIZE - Sets the size of the command line stack.
; Entry: DS:SI - points to stack size in ascii
; Exit: CF - Clear if sucessful, Set if error, DX points to error msg.
;-----------------------------------------------------------------------------
setstacksize proc near
assume ds:nothing,es:nothing
xor bl,bl ;Check for installed code
call setparameter ;Get num and convert to binary
jc setstack_exit ;Check for error
mov cs:[cmdstack_size],ax ;Save parameter
setstack_exit:
ret
setstacksize endp
;-----------------------------------------------------------------------------
; SETLISTBUFFER - Sets the size of the additional buffer reserved for alias
; list expansion.
; Entry: DS:SI - points to buffer size in ascii
; Exit: CF - Clear if sucessful, Set if error, DX points to error msg.
;-----------------------------------------------------------------------------
setlistbuffer proc near
assume ds:nothing,es:nothing
xor bl,bl ;Check for installed code
call setparameter ;Get num and convert to binary
jc setlistbuffer_exit ;Check for error
mov cs:[alias_buffer],ax ;Save buffer size parameter
setlistbuffer_exit:
ret
setlistbuffer endp
;-----------------------------------------------------------------------------
; MINSTACKLEN - sets the minimum legth of a command to stack.
; Entry: ES - segment of the installed code
; DS:SI - points to buffer size in ascii
; Exit: CF - Clear if sucessful, Set if error, DX points to error msg.
;-----------------------------------------------------------------------------
minstacklen proc near
assume ds:nothing,es:nothing
mov bl,1 ;Don't check for installed code
call asc2bin ;Get num and convert to binary
jc minstacklen_exit ;Check for error
cmp al,126
jb minstacklen_1
mov dx,offset errmsg12 ;Stack length too big
stc
jmp short minstacklen_exit
minstacklen_1:
or al,al ;Make sure min length is not
jne minstacklen_2 ; specified at 0. If so,
inc al ; change to 1.
minstacklen_2:
mov es:[minlength],al ;Save minimum length parameter
minstacklen_exit:
ret
minstacklen endp
;-----------------------------------------------------------------------------
; SETPARAMETER - Common code used by the set stack and set buffer and set
; minimum command length routines.
; Entry: DS:SI - points to ascii number
; BL - Flag to indicate check for installed code, BL=0, check.
; Exit: CF - Clear if sucessful, Set if error.
;-----------------------------------------------------------------------------
setparameter proc near
assume ds:nothing,es:nothing
mov dx,offset errmsg4 ;Can't change parameter msg
cmp cs:[alrdy_installed],1 ;If already installed don't
je setparam_error ; change parameter.
call asc2bin
setparam_exit:
ret
setparam_error:
stc ;Set error flag.
jmp short setparam_exit
setparameter endp
;-----------------------------------------------------------------------------
; SETKEY modifies the alias list to add function key definitions.
; Entry: DS:SI - pointer to string identifing the function key
; ES - pointer to segment of installed code
; Exit: CF - clear if successful
;-----------------------------------------------------------------------------
setkey proc near
assume ds:nothing,es:nothing
push es
cmp al,"[" ;Determine alias or key
je setkey_1
dec si ;Backup before last key
inc cx
jmp short setkey_5
setkey_1:
lodsb ;Get next character
dec cx
jcxz setkey_badkey
mov bx,58 ;Load default F1 keycode
or al,20h ;Convert to lower case
cmp al,"f"
je setkey_3
add bx,25 ;Assume shift F1 keycode
cmp al,"s"
je setkey_2
add bx,10 ;Assume ctl F1 keycode
cmp al,"c"
je setkey_2
add bx,10 ;Assume alt F1 keycode
cmp al,"a"
jne setkey_badkey
setkey_2:
lodsb ;Get next character
dec cx
or al,20h ;Convert to lower case
cmp al,"f" ;Make sure next key is "f"
jne setkey_badkey
setkey_3:
call asc2bin
jc setkey_badkey ;If bad number, exit
or ax,ax
je setkey_badkey ;Make sure not zero
cmp ax,10
ja setkey_badkey ;Make sure less than 10
cmp byte ptr [si-1],"]" ;Check for closing bracket
jne setkey_badkey ; if not found, error
add bx,ax ;Add in function key number
cmp byte ptr [si]," " ;Check to see if a character
jbe setkey_4 ; trails the closing bracket.
cmp byte ptr [si],"*" ;Check to see if an * is
jne setkey_badkey ; appended to the function
lodsb ; key assignment. If so,
dec cx ; remove key and set flag
mov cs:[append_cr],1 ; to append cr to command.
setkey_4:
sub si,2 ;Back up to keycode.
xor bh,bh
mov ds:[si],bx ;Save keycode on command line
add cx,2
setkey_5:
call setalias ;Use SETALIAS to load
setkey_exit:
pop es ;Restore ptr to installed seg
ret
setkey_badkey:
mov dx,offset errmsg11 ;Bad key assignment msg
stc
jmp setkey_exit
setkey endp
;-----------------------------------------------------------------------------
; SETALIAS modifies the alias list according to command line agruments.
; Entry: DS:SI - pointer to string to be inserted into alias list.
; ES - pointer to segment of installed code.
; Exit: CF - clear if successful
;-----------------------------------------------------------------------------
setalias proc near
assume ds:nothing,es:nothing
push es
xor bl,bl ;Find 1st character on
call scanline ; command line.
jnc setalias_1 ;If at end of line, exit
jmp setalias_exit ; routine.
setalias_1:
;
;Get length of alias, then search list for matching alias
;
dec si ;Backup to before 1st char.
inc cx
mov byte ptr cs:[alias_inlist],0 ;Assume not in list
call searchalias ;Is there already an alias?
jc setalias_2 ;No, continue.
inc byte ptr cs:[alias_inlist]
call delete_aliasent ;Delete entry from list
setalias_2:
;
;Append new alias to the end of the list.
;
mov bp,di ;Save ptr to end of list.
add di,4 ;Move past length fields.
push es ;Get max size of alias list.
mov es,cs:[other_seg]
mov dx,es:[aliaslist_size]
pop es
;
;Append alias to list.
;
xor ax,ax ;Clear character counter
setalias_3:
lodsb ;Get byte
dec cx ;Decriment buffer counter.
jcxz setalias_4 ;If at end of file, exit.
cmp al,13 ;See if at end of line.
jne setalias_6 ;No, continue.
setalias_4:
cmp byte ptr cs:[alias_inlist],0
jne setalias_5 ;Was alias in list?
jmp setalias_notnfil ;No, incomplete alias specifed
setalias_5:
jmp setalias_exit ;Yes, alias simply erased.
setalias_6:
cmp al,' ' ;See if at end of tag.
je setalias_8 ;Yes, exit copy loop
cmp al,9 ;Check for tab
je setalias_8
cmp di,dx ;See if alias list is full
jbe setalias_7 ;No, continue
jmp setalias_full ;Yes, exit routine
setalias_7:
stosb ;No, add character to list
inc ah ;Inc size of tag
jmp short setalias_3
setalias_8:
mov es:[bp+2],ah ;Save size of alias
;
;Append command to alias list.
;
mov cs:[caps_flag],0 ;Initialize setcaps flag.
xor bx,bx ;Find 1st character in
call scanline ; command.
jc setalias_exit ;If no command, exit
xor ah,ah ;Clear character counter
setalias_9:
cmp al,"%" ;Check for environment var
jne setalias_11 ; by checking for % signs.
cmp cs:[caps_flag],0 ;If caps flag set capitialize
jne setalias_10 ; string before saving.
mov bl,ds:[si] ;Get next character
cmp bl,"0" ;If numeric, assume this is
jb setalias_10 ; a line parameter, not an
cmp bl,"9" ; environment variable so
jbe setalias_11 ; don't set caps flag.
cmp bl,"%" ;Don't let double % signs
je setalias_11 ; indicate environment var.
setalias_10:
not byte ptr cs:[caps_flag] ;Toggle caps flag
setalias_11:
cmp cs:[caps_flag],0 ;Capitialize environment
je setalias_12 ; variables so they will
cmp al,"a" ; match when searched for in
jb setalias_12 ; the environment block.
cmp al,"z"
ja setalias_12
and al,0dfh ;Make character uppercase.
setalias_12:
cmp di,dx ;See if alias list is full
ja setalias_full ;Yes, exit routine
stosb ;Append character on list
inc ah ;Inc character counter.
jcxz setalias_13 ;Check for end of file.
lodsb ;Get next character
dec cx ;Dec file counter.
cmp al,13 ;See if carriage return.
jne setalias_9 ;If not continue
setalias_13:
cmp cs:[append_cr],1 ;If flag set, append carrage
jne setalias_14 ; return to command.
mov al,13
inc ah
stosb
mov cs:[append_cr],0 ;Clear flag
setalias_14:
mov es:[bp+3],ah ;Save command size
mov word ptr es:[di],-1 ;Set new end of list flag
mov ax,di ;Save end pointer to list
add ax,2 ;Make room for the end flag.
mov cs:[aliaslist_end],ax
sub di,bp ;Compute size of entry
mov es:[bp],di ;Put size over old end flag.
inc cs:[file_linecount] ;Point counter to next line.
setalias_exit:
clc
setalias_exit1:
pop es ;Restore ptr to installed seg
ret
setalias_full:
mov dx,offset errmsg9 ;Alias list too large msg.
stc
jmp short setalias_exit1
setalias_notnfil:
mov dx,offset errmsg13 ;Alias not in list.
stc
jmp short setalias_exit1
setalias endp
;-----------------------------------------------------------------------------
; DELALIASENTRY - Deletes an alias entry
; Entry: DS:SI - pointer to the entry in the alias list to delete
; Exit: CF - clear if successful
;-----------------------------------------------------------------------------
delete_aliasent proc near
push cx ;Save registers
push si
push ds ;Yes, remove entry from list
push es ; by moving the remainder of
pop ds ; the list over this entry.
mov si,es:[di] ;Point SI to the next list
add si,di ; entry.
delent_1:
cmp word ptr es:[si],-1 ;Check for the end of the list
je delent_2
mov cx,es:[si] ;Get size of entry
rep movsb ;Copy next entry over current
jmp short delent_1 ; entry.
delent_2:
mov word ptr es:[di],-1 ;Set end of list indicator
pop ds ;Get back file buffer pointer
pop si
pop cx
ret
delete_aliasent endp
;-----------------------------------------------------------------------------
; LOADALIASFILE loads a file containing a list of alias commands.
; Entry: DS:SI - pointer to the name of the file to open
; exit: CX - size of the file in bytes
; CF - clear if successful
;-----------------------------------------------------------------------------
loadaliasfile proc near
assume ds:nothing,es:nothing
xor bl,bl
call scanline ;Find 1st char of filename.
mov dx,si ;Copy filename pointer
inc bl ;Find end of filename
call scanline
mov byte ptr [si-1],0 ;Make filename ASCIIZ.
dec dx
mov ax,3d00h ;Open file (Read only)
int 21h
jc loadfile_error
mov bx,ax ;Copy file handle
;
;Save the name of the file for error messages.
;
push si
push es
mov di,offset filenam_field
push cs
pop es
mov si,dx
loadfile_1:
lodsb
stosb
or al,al
jne loadfile_1
mov byte ptr es:[di-1],"$" ;Terminate string with $.
pop es
pop si
;
;Open file and read contents into file buffer.
;
mov ah,3fh ;Read alias file
xor dx,dx ;Point to base of file buffer.
mov cx,cs:[filebuf_size] ;Get size of file buffer.
shl cx,1 ;Convert to bytes
shl cx,1
shl cx,1
shl cx,1
int 21h
mov si,ax
mov byte ptr ds:[si],13 ;Append a CR to end of file.
mov cx,ax ;Save new file size
xor si,si ;Reset file pointer.
mov ah,3eh ;Close file.
int 21h
mov cs:[file_linecount],1 ;Reset line counter.
loadfile_exit:
clc
loadfile_exit1:
ret
loadfile_error:
stc
mov dx,offset errmsg6 ;Bad filename specified.
jmp short loadfile_exit1
loadaliasfile endp
;-----------------------------------------------------------------------------
; LISTALIAS prints the alias list to screen.
; Entry: ES - segment of the installed code
;-----------------------------------------------------------------------------
listalias proc near
assume ds:nothing,es:nothing
push ds
;
;Print Command stack size and amount of alias buffer space remaining
;
mov dx,offset infomsg2 ;Print size of command stack
call printmsg
mov ax,es:[cmdstack_size] ;Get size of command stack
call hex2asc ;Print size
mov dx,offset infomsg3 ;Print min cmd length
call printmsg
xor ax,ax
mov al,es:[minlength] ;Get min cmd length to stack
call hex2asc ;Print length
mov dx,offset infomsg4 ;Print label to buffer size
call printmsg
lds si,es:[aliaslist_ptr] ;Get pointer to alias list
listalias_1:
cmp word ptr [si],-1 ;Scan through alias list to
je listalias_2 ; find the end of the list.
add si,[si] ;Point to next entry
jmp short listalias_1
listalias_2:
mov ax,es:[aliaslist_size] ;Get offset to end of buffer
sub ax,si ;Subtract end of alias list
sub ax,2 ;Correct for end pointer
call hex2asc ;Print size
mov dx,offset infomsg5 ;Indicate if alias translation
call printmsg ; is enabled or disabled
mov dx,offset infomsg5d ;Disabled message
cmp byte ptr es:[chk_alias],0 ;See if alias enabled
je listalias_3
mov dx,offset infomsg5e ;Enabled message
listalias_3:
call printmsg
;
;Scan through alias list to print function key assignments
;
xor dx,dx ;Clear alias found flag
lds si,es:[aliaslist_ptr] ;Get pointer to alias list
listalias_4:
cmp word ptr [si],-1 ;Check for end of list
jne listalias_5
jmp listalias_11
listalias_5:
mov bx,si ;Save pointer to entry.
cmp byte ptr [si+5],0 ;See if key assignment
je listalias_6 ;If so, skip entry
or dh,1 ;Set alias found flag
add si,[bx] ;Point to next entry
jmp short listalias_4
listalias_6:
;
;Convert scan code into function key label
;
test dh,80h ;See if first time though
jne listalias_7
push dx
mov dx,offset infomsg6 ;If first time print header
call printmsgcr
pop dx
or dh,80h ;Set header printed flag
listalias_7:
call printtab
push dx
add si,4 ;Point SI to command string
mov al,[si] ;Get key code
mov dh,al
cmp al,84 ;Check for base code
jb listalias_9
sub dh,25
mov di,offset shiftmsg ;Assume shift prefix
cmp al,94 ;Check for shift
jb listalias_8
sub dh,10
mov di,offset ctlmsg ;Assume control prefix
cmp al,104 ;Check for ctl
jb listalias_8
mov di,offset altmsg ;Assume alt prefix
sub dh,10
listalias_8:
push dx ;Print prefix identifier
mov dx,di
call printmsg
pop dx
listalias_9:
mov dl,"F" ;Set function key
mov ah,2 ;Character output
int 21h
mov al,dh ;Get modified key code
sub al,58 ;Convert from scan code to hex
xor ah,ah
call hex2asc ;Print function key number
mov cl,[bx+3] ;Get length of command
inc si ;Point SI to command string
inc si
mov di,bx
add di,[bx]
cmp byte ptr [di-1],13 ;Check for carrage return
jne listalias_10 ; after command. If found,
mov dl,'*' ; indicate immediate command
mov ah,2 ; by appending an * to the
int 21h ; end of the function key.
listalias_10:
call printtab
call printtab
call print_string ;Print command to screen
mov dx,offset endmsg ;Append carriage return to
call printmsg ; advance to next line. SI
pop dx ; points to the next entry.
jmp listalias_4
;
;Scan through alias list to print aliases.
;
listalias_11:
test dh,1 ;See if any aliases found
je listalias_exit ;If no aliases, skip remainder
mov dx,offset infomsg7 ;Print header
call printmsgcr
xor cx,cx ;Clear CX
lds si,es:[aliaslist_ptr] ;Get pointer to alias list
listalias_12:
mov bx,si ;Save pointer to entry.
cmp byte ptr [si+5],0 ;See if key definition
jne listalias_13 ;If so, skip entry
add si,[bx]
jmp short listalias_14
listalias_13:
call printtab
add si,4 ;Point SI to alias string
mov cl,[bx+2] ;Get length of alias
call print_string ;Print alias to screen
call printtab
call printtab
mov cl,[bx+3] ;Get length of command
call print_string ;Print command to screen
mov dx,offset endmsg ;Append carriage return to
call printmsg ; advance to next line.
listalias_14:
cmp word ptr [si],-1 ;Check for end of list. SI
jne listalias_12 ; points to the next entry.
listalias_exit:
mov dx,offset infomsg8 ;Print pointer to help msg
call printmsgcr
pop ds
clc
ret
listalias endp
;-----------------------------------------------------------------------------
; PRINTTAB prints a TAB character to the screen.
; Entry: ES - segment of the installed code
;-----------------------------------------------------------------------------
printtab proc near
assume ds:nothing,es:nothing
mov ah,2 ;Character output
mov dl,9 ;Print TAB character
int 21h
ret
printtab endp
;-----------------------------------------------------------------------------
; ENABLEALIAS enables alias translation.
; Entry: ES - segment of the installed code
;-----------------------------------------------------------------------------
enablealias proc near
assume ds:nothing,es:nothing
mov byte ptr es:[chk_alias],1 ;Enable alias
clc
ret
enablealias endp
;-----------------------------------------------------------------------------
; DISABLEALIAS disables alias translation.
; Entry: ES - segment of the installed code
;-----------------------------------------------------------------------------
disablealias proc near
assume ds:nothing,es:nothing
mov byte ptr es:[chk_alias],0 ;Disable alias
clc
ret
disablealias endp
;-----------------------------------------------------------------------------
; REMOVE uninstalls the installed program from memory.
;-----------------------------------------------------------------------------
remove proc near
assume ds:nothing,es:nothing
push ds
mov dx,offset errmsg1 ;Not installed msg
cmp cs:[alrdy_installed],0 ;See if installed
je remove_exit ;Not installed, error
mov cx,cs:[other_seg] ;Get segment of installed code
mov ax,3521h ;Get DOS vector
int 21h
mov ax,es ;Check to make sure DOS
cmp ax,cs:[other_seg] ; vector not modified.
jne remove_error
lds dx,es:[int2fh] ;Get old interrupt 2F vector
cmp dx,-1 ;See if Int used
je remove_1 ;No, skip check of Int 2F
mov ax,352fh ;Get MUX vector
int 21h
mov ax,es ;Check to make sure MUX
cmp ax,cs:[other_seg] ; vector not modified.
jne remove_error
mov ax,252fh ;Set interrupt
int 21h
remove_1:
lds dx,es:[int21h] ;Get old interrupt 21 vector
mov ax,2521h ;Set interrupt
int 21h
mov cx,es:[env_segment]
mov ah,49h ;Free memory block
int 21h
mov es,cx ;Free environment block
mov ah,49h
int 21h
mov dx,offset infomsg1 ;Indicate uninstalled.
mov byte ptr filenam_field,0 ;Clear filename field
remove_exit:
stc
pop ds
remove_exit1: ret
remove_error:
mov dx,offset errmsg3 ;Can't remove error msg
jmp short remove_exit
remove endp
;-----------------------------------------------------------------------------
; COMMENT_LINE allows comments in the alias file by skipping to the next
; carriage return.
; Entry: SI - pointer to ASCII string
; CX - file length
;-----------------------------------------------------------------------------
comment_line proc near
assume ds:nothing,es:nothing
comment_loop:
push es
push ds
pop es
mov di,si ;Copy file pointer
mov al,13 ;Scan for carriage return.
repne scasb
inc cs:[file_linecount] ;Inc file line counter.
mov si,di ;Restore file pointer.
pop es
clc
ret
comment_line endp
;-----------------------------------------------------------------------------
; HEX2ASC converts a binary number to ASCII and prints it to the screen.
; Entry: AX - binary number
;-----------------------------------------------------------------------------
hex2asc proc near
assume ds:nothing,es:nothing
push bx
mov cx,5 ;Allow max of five digits
hex_loop1:
xor dx,dx ;Clear high word
mov bx,10 ;Load number base
div bx ;Divide by base (10)
add dl,30h ;Convert to ascii
push dx ;Save digit on stack
loop hex_loop1
mov cx,5 ;Allow max of five digits
mov bl,"0" ;Set leading zero indicator
hex_loop2:
pop dx ;Get digit off stack
or bl,dl ;Don't print leading zeros.
cmp bl,"0" ;The first non zero will
je hex_1 ; change bl to non-zero.
mov ah,2 ;DOS character output
int 21h
hex_1:
loop hex_loop2
hex_exit:
pop bx
ret
hex2asc endp
;-----------------------------------------------------------------------------
; ASC2BIN - converts an ASCII number of the command line to hex.
; Entry: DS:SI - pointer to ASCII number
;-----------------------------------------------------------------------------
asc2bin proc near
push bx
xor bl,bl
call scanline ;Find next character.
mov di,offset errmsg5 ;Bad number message
jc asc_error ;If no number found, error
mov bl,al ;Copy first digit.
xor ax,ax ;Clear out sum
xor bh,bh ;Clear high byte for word adds
asc_loop:
cmp bl," " ;If space, assume end of
jbe asc_exit ; number.
cmp bl,"]" ;Exit if closing bracket
je asc_exit ; encountered
sub bl,"0" ;Check for valid number then
jb asc_error ; convert to binary.
cmp bl,9
ja asc_error
mov dx,10 ;DX holds base multiplier
mul dx ;Shift over current number
jc asc_overflow ;If overflow, indicate error
add ax,bx ;Add new digit to sum.
jcxz asc_exit ;If end of file, exit.
mov bl,ds:[si] ;Get next ASCII character
inc si ;Point to next character
dec cx ;Dec file size counter
jmp short asc_loop ;Go back for more
asc_exit:
clc ;Clear error flag.
asc_exit1:
pop bx
ret
asc_overflow:
mov di,offset errmsg12 ;Number too large message.
asc_error:
mov dx,di ;Copy message pointer.
stc ;Set error flag.
jmp short asc_exit1
asc2bin endp
;-----------------------------------------------------------------------------
; SCANLINE performs the same function as SCAN4CHAR but keeps track of the
; carriage returns.
; Entry: SI - pointer to ASCII string
; BL - 0 = find next char, 1 = find next space
; CX - file length
; Exit: AL - first nonspace character
; CF - set if carriage return found
;-----------------------------------------------------------------------------
scanline proc near
call scan4char ;Find the next char.
jnc scanline_exit
inc cs:[file_linecount] ;Point to next line.
stc
scanline_exit:
ret
scanline endp
end_of_code = $
code ends
end main
------------
