/*
**  TERM.CFG
**
**  1) Set AT_COMMAND_SET to 1 if you are using a HAYES AT command set
**     compatible modem, else set to 0.
**  2) Set RTS_CTS_CONTROL to 1 if talking to a modem that requires flow
**     control.
**  3) If you are using a null modem cable for a direct PC to PC link, don't
**     set RTS_CTS_CONTROL to 1 unless you are absolutely sure that RTS and
**     CTS are switched in the null modem cable.
**  4) Don't reduce any of the timing constants.
*/

#define AT_COMMAND_SET  0
#define RTS_CTS_CONTROL 0

#define ONE_SECOND 18
#define SHORT_WAIT 3
#define LONG_WAIT 10