PARTITIONS
   __________________________________________________________________________
                                       
   
   
   This article is about the partitioning scheme that MS-DOS uses to keep
   track of it's partitions. This is the standard that all PC operation
   systems must use to be allowed to share hard disk resources with other
   operating systems.
   
   Send me any questions, comments, or corrections. Chris Lattner
   
   
     _________________________________________________________________
   
   
   DOS keeps track of partitions with a "Master Partition Table" that it
   keeps at offset 1BEh in the disk's boot sector. It contains four 16
   byte entries, one for each partition. Each entry is divided into ten
   fields that contain all of the information necessary to describe a
   partition on the hard drive, including:
   
     * Whether this partition is the one that got booted from.
     * The Head, Sector, and Cylinder where the partition starts.
     * The Head, Sector, and Cylinder where the partition ends.
     * The operating system that owns it.
     * The number of sectors that are before this partition.
     * The length of the partition in sectors.
       
   See: Figure 1
   
   Now the astute reader may say: "Wait a minute! On my machine I run
   DOS/Windows and OS/2. I have 5 DOS partitions. How can this be!"
   
   Microsoft's solution to this problem was to invent the "Extended DOS"
   partition. If you go into FDISK, you will see that you have a
   "Primary" DOS partition, and an "Extended" DOS partition (Plus
   whatever else you have). You can also type in "UNFORMAT /PARTN /L" to
   get a list of all of your partitions. This clearly shows the chain
   format used.
   
More to come!


  __________________________________________________________________________

Figure 1

   Start End BI HSC SI HSC SBNS 0h1h2h3h4h5h6h7h 8h9hAhBhChDhEhFh This is
   repeated four times (one for each partition). Offsets are: 1BEh, 1CEh,
   1DEh, and 1EEh. At offset 1FEh, AA55h signifies that the disk is
   bootable. The BIOS reads it in and executes it. See my article on Boot
   Sectors.
   
  Key:
   BI: Boot indication. 0 = Not booted from. 80h = Booted from.
       H: Head. Starting/Ending head number for the partition.
       S: Sector. Starting/Ending sector number for the partition. This
       field also holds bits 8 and 9 of the cylinder in standard DOS
       format.
       C: Cylinder. Lower 8 bits of the Starting/Ending cylinder number
       for the partition.
       SI: System Indicator:
        00h = Unused
            01h = DOS 12 bit FAT (0 - 16 megs)
            02h = XENIX root file system
            03h = XENIX /usr file system (obsolete)
            04h = DOS 16 bit FAT (16 - 32 megs)
            05h = Extended DOS partition
            06h = DOS 16 bit FAT (32 megs and up)
            07h = OS/2 High Performance File System
            07h = Windows NT (NTFS)
            07h = Advanced Unix
            0Ah = OS/2 Boot Manager
          + For more, consult Ralf Brown's Interrupt list: INT 19
   SB (DWORD): Number of sectors before this partition.
       NS (DWORD): Number of sectors in this partition.
       
   
      
        ____________________________________________________________________
      
      Created by Chris Lattner (sabre@teleport.com)