; Telebit T2000 & Trailblazer Plus
;
; BEFORE STARTING: Place your Telebit in ECM (Enhanced Command Mode)
;                  by following these steps:
;
;  1. Start with the modem OFF and the A/B switch in the A position
;  2. Press and hold the T/D while turning the modem ON.  Release the
;     T/D switch after the MR indicator comes on.
;
;
; ONE TIME MODEM SETUP:  The first time you run TE/2, upon entering the
; program, type the following lines and press ENTER after each.  Then
; exit and restart TE/2.
;
;       AT E1 Q0 M1 V1 W1 X14 Y0 S0=0
;       AT S50=0 S51=254 S52=4 S54=3 S58=2
;       AT S63=1 S64=0 S66=1 S67=0 S68=2 S90=0
;       AT S92=1 S94=1 S95=2 S96=1 S110=1
;       AT S111=0 S131=1 S255=0 &W1 &W2
;
; NOTES: Set ALL dialing directory entries to 19200 baud

Baud          19200
Parity        N
WordLen       8
StopBits      1

XonXoff       BOTH
CtsRts        BOTH
MatchBaud     FALSE

ModemInitStrg ATZ^M
ModemDialStrg ATDT
ModemDialSufx ^M
ModemHangStrg ;
DTRHangup     TRUE

Connect       CONNECT,19200

NoConnect     NO_DIALTONE
NoConnect     NO_CARRIER
NoConnect     BUSY
NoConnect     VOICE