#ifndef __ASM_MIPS_IOCTLS_H
#define __ASM_MIPS_IOCTLS_H
#include <asm/ioctl.h>
#define TCGETA 0x5401
#define TCSETA 0x5402
#define TCSETAW 0x5403
#define TCSETAF 0x5404
#define TCSBRK 0x5405
#define TCXONC 0x5406
#define TCFLSH 0x5407
#define TCGETS 0x540d
#define TCSETS 0x540e
#define TCSETSW 0x540f
#define TCSETSF 0x5410
#define TIOCEXCL 0x740d /* set exclusive use of tty */
#define TIOCNXCL 0x740e /* reset exclusive use of tty */
#define TIOCOUTQ 0x7472 /* output queue size */
#define TIOCSTI 0x5472 /* simulate terminal input */
#define TIOCMGET 0x741d /* get all modem bits */
#define TIOCMBIS 0x741b /* bis modem bits */
#define TIOCMBIC 0x741c /* bic modem bits */
#define TIOCMSET 0x741a /* set all modem bits */
#define TIOCPKT 0x5470 /* pty: set/clear packet mode */
#define TIOCPKT_DATA 0x00 /* data packet */
#define TIOCPKT_FLUSHREAD 0x01 /* flush packet */
#define TIOCPKT_FLUSHWRITE 0x02 /* flush packet */
#define TIOCPKT_STOP 0x04 /* stop output */
#define TIOCPKT_START 0x08 /* start output */
#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */
#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */
#if 0
#define TIOCPKT_IOCTL 0x40 /* state change of pty driver */
#endif
#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */
#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */
#define TIOCNOTTY 0x5471 /* void tty association */
#define TIOCSETD 0x7401
#define TIOCGETD 0x7400
#define FIOCLEX 0x6601
#define FIONCLEX 0x6602 /* these numbers need to be adjusted. */
#define FIOASYNC 0x667d
#define FIONBIO 0x667e
/* 116-117 compat */
#define TIOCSPGRP _IOW('t', 118, int) /* set pgrp of tty */
#define TIOCGPGRP _IOR('t', 119, int) /* get pgrp of tty */
#define TIOCCONS _IOW('t', 120, int) /* become virtual console */
#define FIONREAD 0x467f
#define TIOCINQ FIONREAD
#if 0
#define TIOCSETA _IOW('t', 20, struct termios) /* set termios struct */
#define TIOCSETAW _IOW('t', 21, struct termios) /* drain output, set */
#define TIOCSETAF _IOW('t', 22, struct termios) /* drn out, fls in, set */
#define TIOCGETD _IOR('t', 26, int) /* get line discipline */
#define TIOCSETD _IOW('t', 27, int) /* set line discipline */
/* 127-124 compat */
#endif
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
#define TIOCGSOFTCAR 0x5481
#define TIOCSSOFTCAR 0x5482
#define TIOCLINUX 0x5483
#define TIOCGSERIAL 0x5484
#define TIOCSSERIAL 0x5485
#define TCSBRKP 0x5486 /* Needed for POSIX tcsendbreak() */
#define TIOCTTYGSTRUCT 0x5487 /* For debugging only */
#define TIOCSERCONFIG 0x5488
#define TIOCSERGWILD 0x5489
#define TIOCSERSWILD 0x548a
#define TIOCGLCKTRMIOS 0x548b
#define TIOCSLCKTRMIOS 0x548c
#define TIOCSERGSTRUCT 0x548d /* For debugging only */
#define TIOCSERGETLSR 0x548e /* Get line status register */
#define TIOCSERGETMULTI 0x548f /* Get multiport config */
#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
/* ----------------------------------------------------------------------- */
/* c_cc characters */
#define VINTR 0 /* Interrupt character [ISIG]. */
#define VQUIT 1 /* Quit character [ISIG]. */
#define VERASE 2 /* Erase character [ICANON]. */
#define VKILL 3 /* Kill-line character [ICANON]. */
#define VEOF 4 /* End-of-file character [ICANON]. */
#define VMIN VEOF /* Minimum number of bytes read at once [!ICANON]. */
#define VEOL 5 /* End-of-line character [ICANON]. */
#define VTIME VEOL /* Time-out value (tenths of a second) [!ICANON]. */
#if defined (__USE_BSD) || defined (__KERNEL__)
#define VEOL2 6 /* Second EOL character [ICANON]. */
/* The next two are guesses ... */
#define VSWTC 7 /* ??? */
#endif
#define VSWTCH VSWTC
#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */
#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */
#define VSUSP 10 /* Suspend character [ISIG]. */
#if 0
/*
* VDSUSP is not supported
*/
#if defined (__USE_BSD) || defined (__KERNEL__)
#define VDSUSP 11 /* Delayed suspend character [ISIG]. */
#endif
#endif
#if defined (__USE_BSD) || defined (__KERNEL__)
#define VREPRINT 12 /* Reprint-line character [ICANON]. */
#endif
#if defined (__USE_BSD) || defined (__KERNEL__)
#define VDISCARD 13 /* Discard character [IEXTEN]. */
#define VWERASE 14 /* Word-erase character [ICANON]. */
#define VLNEXT 15 /* Literal-next character [IEXTEN]. */
#endif
/*
* 17 - 19 are reserved
*/
#ifdef __KERNEL__
/*
* intr=^C quit=^| erase=del kill=^U
* eof=^D eol=time=\0 eol2=\0 swtc=\0
* start=^Q stop=^S susp=^Z vdsusp=
* reprint=^R discard=^U werase=^W lnext=^V
*/
#define INIT_C_CC "\003\034\177\025\004\0\0\0\021\023\032\0\022\017\027\026"
#endif
/* c_iflag bits */
#define IGNBRK 0000001 /* Ignore break condition. */
#define BRKINT 0000002 /* Signal interrupt on break. */
#define IGNPAR 0000004 /* Ignore characters with parity errors. */
#define PARMRK 0000010 /* Mark parity and framing errors. */
#define INPCK 0000020 /* Enable input parity check. */
#define ISTRIP 0000040 /* Strip 8th bit off characters. */
#define INLCR 0000100 /* Map NL to CR on input. */
#define IGNCR 0000200 /* Ignore CR. */
#define ICRNL 0000400 /* Map CR to NL on input. */
#if defined (__USE_BSD) || defined (__KERNEL__)
#define IUCLC 0001000 /* Map upper case to lower case on input. */
#endif
#define IXON 0002000 /* Enable start/stop output control. */
#if defined (__USE_BSD) || defined (__KERNEL__)
#define IXANY 0004000 /* Any character will restart after stop. */
#endif
#define IXOFF 0010000 /* Enable start/stop input control. */
#if defined (__USE_BSD) || defined (__KERNEL__)
#define IMAXBEL 0020000 /* Ring bell when input queue is full. */
#endif
/* c_oflag bits */
#define OPOST 0000001 /* Perform output processing. */
#if defined (__USE_BSD) || defined (__KERNEL__)
#define OLCUC 0000002 /* Map lower case to upper case on output. */
#define ONLCR 0000004 /* Map NL to CR-NL on output. */
#define OCRNL 0000010
#define ONOCR 0000020
#define ONLRET 0000040
#define OFILL 0000100
#define OFDEL 0000200
#define NLDLY 0000400
#define NL0 0000000
#define NL1 0000400
#define CRDLY 0003000
#define CR0 0000000
#define CR1 0001000
#define CR2 0002000
#define CR3 0003000
#define TABDLY 0014000
#define TAB0 0000000
#define TAB1 0004000
#define TAB2 0010000
#define TAB3 0014000
#define XTABS 0014000
#define BSDLY 0020000
#define BS0 0000000
#define BS1 0020000
#define VTDLY 0040000
#define VT0 0000000
#define VT1 0040000
#define FFDLY 0100000
#define FF0 0000000
#define FF1 0100000
/*
#define PAGEOUT ???
#define WRAP ???
*/
#endif
/* c_cflag bit meaning */
#define CBAUD 0010017
#define B0 0000000 /* hang up */
#define B50 0000001
#define B75 0000002
#define B110 0000003
#define B134 0000004
#define B150 0000005
#define B200 0000006
#define B300 0000007
#define B600 0000010
#define B1200 0000011
#define B1800 0000012
#define B2400 0000013
#define B4800 0000014
#define B9600 0000015
#define B19200 0000016
#define B38400 0000017
#define EXTA B19200
#define EXTB B38400
#define CSIZE 0000060 /* Number of bits per byte (mask). */
#define CS5 0000000 /* 5 bits per byte. */
#define CS6 0000020 /* 6 bits per byte. */
#define CS7 0000040 /* 7 bits per byte. */
#define CS8 0000060 /* 8 bits per byte. */
#define CSTOPB 0000100 /* Two stop bits instead of one. */
#define CREAD 0000200 /* Enable receiver. */
#define PARENB 0000400 /* Parity enable. */
#define PARODD 0001000 /* Odd parity instead of even. */
#define HUPCL 0002000 /* Hang up on last close. */
#define CLOCAL 0004000 /* Ignore modem status lines. */
#if defined (__USE_BSD) || defined (__KERNEL__)
#define CBAUDEX 0010000
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
#define B460800 0010004
#define CIBAUD 002003600000 /* input baud rate (not used) */
#define CRTSCTS 020000000000 /* flow control */
#endif
/* c_lflag bits */
#define ISIG 0000001 /* Enable signals. */
#define ICANON 0000002 /* Do erase and kill processing. */
#define XCASE 0000004
#define ECHO 0000010 /* Enable echo. */
#define ECHOE 0000020 /* Visual erase for ERASE. */
#define ECHOK 0000040 /* Echo NL after KILL. */
#define ECHONL 0000100 /* Echo NL even if ECHO is off. */
#define NOFLSH 0000200 /* Disable flush after interrupt. */
#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */
#if defined (__USE_BSD) || defined (__KERNEL__)
#define ECHOCTL 0001000 /* Echo control characters as ^X. */
#define ECHOPRT 0002000 /* Hardcopy visual erase. */
#define ECHOKE 0004000 /* Visual erase for KILL. */
#endif
#define FLUSHO 0020000
#if defined (__USE_BSD) || defined (__KERNEL__)
#define PENDIN 0040000 /* Retype pending input (state). */
#endif
#define TOSTOP 0100000 /* Send SIGTTOU for background output. */
#define ITOSTOP TOSTOP
/* modem lines */
#define TIOCM_LE 0x001 /* line enable */
#define TIOCM_DTR 0x002 /* data terminal ready */
#define TIOCM_RTS 0x004 /* request to send */
#define TIOCM_ST 0x010 /* secondary transmit */
#define TIOCM_SR 0x020 /* secondary receive */
#define TIOCM_CTS 0x040 /* clear to send */
#define TIOCM_CAR 0x100 /* carrier detect */
#define TIOCM_CD TIOCM_CAR
#define TIOCM_RNG 0x200 /* ring */
#define TIOCM_RI TIOCM_RNG
#define TIOCM_DSR 0x400 /* data set ready */
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
/* tcflow() and TCXONC use these */
#define TCOOFF 0 /* Suspend output. */
#define TCOON 1 /* Restart suspended output. */
#define TCIOFF 2 /* Send a STOP character. */
#define TCION 3 /* Send a START character. */
/* tcflush() and TCFLSH use these */
#define TCIFLUSH 0 /* Discard data received but not yet read. */
#define TCOFLUSH 1 /* Discard data written but not yet sent. */
#define TCIOFLUSH 2 /* Discard all pending data. */
/* tcsetattr uses these */
#define TCSANOW TCSETS /* Change immediately. */
#define TCSADRAIN TCSETSW /* Change when pending output is written. */
#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */
/* line disciplines */
#define N_TTY 0
#define N_SLIP 1
#define N_MOUSE 2
#define N_PPP 3
#endif /* __ASM_MIPS_IOCTLS_H */
