/*
* linux/arch/i386/kernel/time.c
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*
* Adapted for PowerPC (PreP) by Gary Thomas
*
* This file contains the PC-specific time handling details:
* reading the RTC at bootup, etc..
* 1994-07-02 Alan Modra
* fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
* 1995-03-26 Markus Kuhn
* fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
* precision CMOS clock update
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/nvram.h>
#include <asm/mc146818rtc.h>
#include <linux/timex.h>
#include <linux/config.h>
extern int isBeBox[];
#define TIMER_IRQ 0
/* Cycle counter value at the previous timer interrupt.. */
static unsigned long long last_timer_cc = 0;
static unsigned long long init_timer_cc = 0;
static inline int CMOS_READ(int addr)
{
outb(addr>>8, NVRAM_AS1);
outb(addr, NVRAM_AS0);
return (inb(NVRAM_DATA));
}
/* This function must be called with interrupts disabled
* It was inspired by Steve McCanne's microtime-i386 for BSD. -- jrs
*
* However, the pc-audio speaker driver changes the divisor so that
* it gets interrupted rather more often - it loads 64 into the
* counter rather than 11932! This has an adverse impact on
* do_gettimeoffset() -- it stops working! What is also not
* good is that the interval that our timer function gets called
* is no longer 10.0002 ms, but 9.9767 ms. To get around this
* would require using a different timing source. Maybe someone
* could use the RTC - I know that this can interrupt at frequencies
* ranging from 8192Hz to 2Hz. If I had the energy, I'd somehow fix
* it so that at startup, the timer code in sched.c would select
* using either the RTC or the 8253 timer. The decision would be
* based on whether there was any other device around that needed
* to trample on the 8253. I'd set up the RTC to interrupt at 1024 Hz,
* and then do some jiggery to have a version of do_timer that
* advanced the clock by 1/1024 s. Every time that reached over 1/100
* of a second, then do all the old code. If the time was kept correct
* then do_gettimeoffset could just return 0 - there is no low order
* divider that can be accessed.
*
* Ideally, you would be able to use the RTC for the speaker driver,
* but it appears that the speaker driver really needs interrupt more
* often than every 120 us or so.
*
* Anyway, this needs more thought.... pjsg (1993-08-28)
*
* If you are really that interested, you should be reading
* comp.protocols.time.ntp!
*/
#define TICK_SIZE tick
static unsigned long do_slow_gettimeoffset(void)
{
int count;
unsigned long offset = 0;
/* timer count may underflow right here */
outb_p(0x00, 0x43); /* latch the count ASAP */
count = inb_p(0x40); /* read the latched count */
count |= inb(0x40) << 8;
/* we know probability of underflow is always MUCH less than 1% */
if (count > (LATCH - LATCH/100)) {
/* check for pending timer interrupt */
outb_p(0x0a, 0x20);
if (inb(0x20) & 1)
offset = TICK_SIZE;
}
count = ((LATCH-1) - count) * TICK_SIZE;
count = (count + LATCH/2) / LATCH;
return offset + count;
}
static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
/*
* This version of gettimeofday has near microsecond resolution.
*/
void do_gettimeofday(struct timeval *tv)
{
unsigned long flags;
save_flags(flags);
cli();
*tv = xtime;
tv->tv_usec += do_gettimeoffset();
if (tv->tv_usec >= 1000000) {
tv->tv_usec -= 1000000;
tv->tv_sec++;
}
restore_flags(flags);
}
void do_settimeofday(struct timeval *tv)
{
cli();
/* This is revolting. We need to set the xtime.tv_usec
* correctly. However, the value in this location is
* is value at the last tick.
* Discover what correction gettimeofday
* would have done, and then undo it!
*/
tv->tv_usec -= do_gettimeoffset();
if (tv->tv_usec < 0) {
tv->tv_usec += 1000000;
tv->tv_sec--;
}
xtime = *tv;
time_state = TIME_BAD;
time_maxerror = 0x70000000;
time_esterror = 0x70000000;
sti();
}
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
* called 500 ms after the second nowtime has started, because when
* nowtime is written into the registers of the CMOS clock, it will
* jump to the next second precisely 500 ms later. Check the Motorola
* MC146818A or Dallas DS12887 data sheet for details.
*/
static int set_rtc_mmss(unsigned long nowtime)
{
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
#ifdef __powerpc__
return (-1); /* Not implemented */
#else
save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
BCD_TO_BIN(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
real_minutes += 30; /* correct for half hour time zone */
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(real_seconds);
BIN_TO_BCD(real_minutes);
}
CMOS_WRITE(real_seconds,RTC_SECONDS);
CMOS_WRITE(real_minutes,RTC_MINUTES);
} else
retval = -1;
/* The following flags have to be released exactly in this order,
* otherwise the DS12887 (popular MC146818A clone with integrated
* battery and quartz) will not reset the oscillator and will not
* update precisely 500 ms later. You won't find this mentioned in
* the Dallas Semiconductor data sheets, but who believes data
* sheets anyway ... -- Markus Kuhn
*/
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
return retval;
#endif
}
/* last time the cmos clock got updated */
static long last_rtc_update = 0;
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
static inline void timer_interrupt(int irq, void *dev, struct pt_regs * regs)
{
do_timer(regs);
/*
* If we have an externally synchronized Linux clock, then update
* CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
* called as close as possible to 500 ms before the new second starts.
*/
if (time_state != TIME_BAD && xtime.tv_sec > last_rtc_update + 660 &&
xtime.tv_usec > 500000 - (tick >> 1) &&
xtime.tv_usec < 500000 + (tick >> 1))
if (set_rtc_mmss(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec;
else
last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
#if 0
/* As we return to user mode fire off the other CPU schedulers.. this is
basically because we don't yet share IRQ's around. This message is
rigged to be safe on the 386 - basically its a hack, so don't look
closely for now.. */
smp_message_pass(MSG_ALL_BUT_SELF, MSG_RESCHEDULE, 0L, 0);
#endif
}
/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
* Assumes input in normal date format, i.e. 1980-12-31 23:59:59
* => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
*
* [For the Julian calendar (which was used in Russia before 1917,
* Britain & colonies before 1752, anywhere else before 1582,
* and is still in use by some communities) leave out the
* -year/100+year/400 terms, and add 10.]
*
* This algorithm was first published by Gauss (I think).
*
* WARNING: this function will overflow on 2106-02-07 06:28:16 on
* machines were long is 32-bit! (However, as time_t is signed, we
* will already get problems at other places on 2038-01-19 03:14:08)
*/
static inline unsigned long mktime(unsigned int year, unsigned int mon,
unsigned int day, unsigned int hour,
unsigned int min, unsigned int sec)
{
if (0 >= (int) (mon -= 2)) { /* 1..12 -> 11,12,1..10 */
mon += 12; /* Puts Feb last since it has leap day */
year -= 1;
}
return (((
(unsigned long)(year/4 - year/100 + year/400 + 367*mon/12 + day) +
year*365 - 719499
)*24 + hour /* now have hours */
)*60 + min /* now have minutes */
)*60 + sec; /* finally seconds */
}
unsigned long get_cmos_time(void)
{
unsigned int year, mon, day, hour, min, sec;
int i;
if (isBeBox[0])
{
#ifndef __powerpc__
/* The Linux interpretation of the CMOS clock register contents:
* When the Update-In-Progress (UIP) flag goes from 1 to 0, the
* RTC registers show the second which has precisely just started.
* Let's hope other operating systems interpret the RTC the same way.
*/
/* read RTC exactly on falling edge of update flag */
for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
break;
for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
break;
#endif
do { /* Isn't this overkill ? UIP above should guarantee consistency */
sec = CMOS_MCRTC_READ(MCRTC_SECONDS);
min = CMOS_MCRTC_READ(MCRTC_MINUTES);
hour = CMOS_MCRTC_READ(MCRTC_HOURS);
day = CMOS_MCRTC_READ(MCRTC_DAY_OF_MONTH);
mon = CMOS_MCRTC_READ(MCRTC_MONTH);
year = CMOS_MCRTC_READ(MCRTC_YEAR);
} while (sec != CMOS_MCRTC_READ(MCRTC_SECONDS));
} else
{ /* Motorola PowerStack etc. */
do { /* Isn't this overkill ? UIP above should guarantee consistency */
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
hour = CMOS_READ(RTC_HOURS);
day = CMOS_READ(RTC_DAY_OF_MONTH);
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
} while (sec != CMOS_READ(RTC_SECONDS));
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
BCD_TO_BIN(day);
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
}
#if 0
printk("CMOS TOD - M/D/Y H:M:S = %d/%d/%d %d:%02d:%02d\n", mon, day, year, hour, min, sec);
#endif
if ((year += 1900) < 1970)
year += 100;
return mktime(year, mon, day, hour, min, sec);
}
void time_init(void)
{
void (*irq_handler)(int, struct pt_regs *);
xtime.tv_sec = get_cmos_time();
xtime.tv_usec = 0;
/* If we have the CPU hardware time counters, use them */
irq_handler = timer_interrupt;
if (request_irq(TIMER_IRQ, irq_handler, 0, "timer", NULL) != 0)
panic("Could not allocate timer IRQ!");
}
