THE HARD DISK MENU SYSTEM USER GUIDE
Version 4.60
August 1993
MicroFox Company
Post Office Box 447
Richfield OH 44286-0447
U.S.A.
Developed by Jim Hass, MicroFox Company
Copyright (c) 1986-1993 by Jim Hass
The Hard Disk Menu System (HDM) is the "push-button-easy" menu
system you need to simplify your computer. Once HDM is set up,
you start programs and commands with a press of one or two keys.
HDM is:
* Compatible
* Fast
* Powerful
* Flexible
* Network-Ready
* Affordable
HARD DISK MENU SYSTEM Version 4.60
ORDER INFORMATION
For additional information on licensing the Hard Disk Menu
System, see the order form in Appendix G or contact:
MicroFox Company Voice and Fax (216) 659-9489
PO Box 447
Richfield OH 44286-0447 Electronic Mail to: Jim Hass
USA via CompuServe 73057,3113
HDM LICENSE AND DISCLAIMER
The Hard Disk Menu System is the copyrighted property of Jim
Hass. MicroFox Company grants you a limited, non-exclusive
license to use this copy of HDM. You do not have the right to
transfer the title of ownership nor do you have the right to
copyright any of these materials.
The author makes no representations or warranties with respect
to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular
purpose. Further, the author reserves the right to revise this
publication and to make changes from time to time in the
content hereof without obligation of the author to notify any
person or organization of such revision or changes.
ABOUT THIS MANUAL
This user manual was written and designed by Keith Aleshire of
Computer Consumer Services Inc. A freelance computer journalist,
technical writer and author, Mr. Aleshire delivers affordable
documentation services to software authors and companies. For
more information, please contact MicroFox Company.
Copyright 1986-1993, Jim Hass (MicroFox Company).
All rights reserved world wide.
CompuServe is a registered trademark of CompuServe Inc.
dBase is a registered trademark of Borland International.
Novell and DR-DOS are registered trademarks of Novell Corp.
IBM is a registered trademark of IBM Corp.
Lotus and 1-2-3 are registered trademarks of Lotus Development.
Microsoft, MS-DOS are registered trademarks of Microsoft Corp.
Windows is a trademark of Microsoft Corp.
NDOS is a registered trademark of Symantec Corp.
WordPerfect is a registered trademark of WordPerfect Corp.
page 2
HARD DISK MENU SYSTEM Version 4.60
TABLE OF CONTENTS
ORDER INFORMATION . . . . . . . . . . . . . . . . . . . . . 2
HDM LICENSE AND DISCLAIMER . . . . . . . . . . . . . . . . 2
ABOUT THIS MANUAL . . . . . . . . . . . . . . . . . . . . . 2
HOW TO USE THIS GUIDE . . . . . . . . . . . . . . . . . . . 8
To understand a procedure . . . . . . . . . . . . 9
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . 9
What is shareware? . . . . . . . . . . . . . . . 10
WHY USE HDM? . . . . . . . . . . . . . . . . . . . . . . 11
Compatible . . . . . . . . . . . . . . . . . . . 12
Powerful . . . . . . . . . . . . . . . . . . . . 12
Flexible . . . . . . . . . . . . . . . . . . . . 12
Networkable . . . . . . . . . . . . . . . . . . 12
Affordable . . . . . . . . . . . . . . . . . . . 12
System Requirements . . . . . . . . . . . . . . 13
Key Files . . . . . . . . . . . . . . . . . . . 13
Three Easy Steps . . . . . . . . . . . . . . . . 13
INSTALLING AND STARTING HDM . . . . . . . . . . . . . . . 14
To install HDM . . . . . . . . . . . . . 14
Running HDM . . . . . . . . . . . . . . . . . . 15
To start HDM . . . . . . . . . . . . . . 15
To exit HDM . . . . . . . . . . . . . . 16
To return to HDM . . . . . . . . . . . . 16
Configuring HDM . . . . . . . . . . . . . . . . 16
On-Line Help . . . . . . . . . . . . . . . . . . 17
USING HDM . . . . . . . . . . . . . . . . . . . . . . . 18
The Structure of HDM . . . . . . . . . . . . . . 18
Opening the Top Menu . . . . . . . . . . . . . . 19
Selecting a Menu Entry . . . . . . . . . . . . . 20
Creating Menu Entries . . . . . . . . . . . . . 21
To build a menu entry manually . . . . . 21
To auto-build a menu action . . . . . . 22
Using Tilde (~) & Braces ({ }) in a Menu Action 23
Modifying Menu Entries . . . . . . . . . . . . . 24
To change a menu entry . . . . . . . . . 24
To duplicate a menu entry . . . . . . . 24
To erase a menu entry . . . . . . . . . 24
To move a menu entry . . . . . . . . . . 25
To switch two menu entries . . . . . . . 25
Seeing Your Menu Actions . . . . . . . . . . . . 25
To see your menu action . . . . . . . . 25
Saving Your Changes . . . . . . . . . . . . . . 26
To save your changes manually . . . . . 26
Undoing Your Changes . . . . . . . . . . . . . . 26
page 3
HARD DISK MENU SYSTEM Version 4.60
Menu Action Macros . . . . . . . . . . . . . . . 27
To create a menu action macro . . . . . 27
Sophisticated Macros . . . . . . . . . . . . . . 28
Modifying Menu Pages . . . . . . . . . . . . . . 30
To compress a menu page . . . . . . . . 30
To erase a menu page . . . . . . . . . . 31
To import (duplicate) a menu page . . . 31
To rename a menu page . . . . . . . . . 32
To swap two menu pages . . . . . . . . . 32
Tracking Activity . . . . . . . . . . . . . . . 32
Security and Networks . . . . . . . . . . . . . 32
CUSTOMIZING HDM . . . . . . . . . . . . . . . . . . . . . 33
Changing the Look of HDM . . . . . . . . . . . . 33
To change the borders of HDM . . . . . . 33
To change HDM's colors . . . . . . . . . 33
To change the date and Top Menu . . . . 34
To change lines User Menu & Page Index . 35
To change your menu design . . . . . . . 35
To add, change or delete title lines . . 35
To change your wallpaper . . . . . . . . 36
To change the date and time (& format) . 36
Global Settings . . . . . . . . . . . . . . . . 36
To confirm exiting to DOS using F3 . . . 36
To hide empty menu pages . . . . . . . . 37
To hide empty menu entries . . . . . . . 37
To keep cursor wrapping to same menu pg 37
To add, delete or change timed execution 38
To run menu entry upon logging onto HDM 39
To start a menu entry from AUTOEXEC.BAT 40
To change the inactive execution . . . . 41
To run a menu entry upon logging off . . 41
Changing the Keyboard and Mouse Cursors . . . . 42
To change the rate of blinking cursor . 42
To change the speed of mouse cursor . . 42
Modem Changes . . . . . . . . . . . . . . . . . 43
To set your serial port and phone type . 43
Screen Blanker . . . . . . . . . . . . . . . . . 43
To set up your screen blanker . . . . . 43
Adding Your Own Logo . . . . . . . . . . . . . . 44
Home-Made Help . . . . . . . . . . . . . . . . . 44
Startup Options . . . . . . . . . . . . . . . . 45
After the HDM Command . . . . . . . . . . . . . 45
DOS Environment Variables . . . . . . . . . . . 47
Other Environment Variables . . . . . . . . . . 48
page 4
HARD DISK MENU SYSTEM Version 4.60
USING FUNCTIONS . . . . . . . . . . . . . . . . . . . . . 49
Using Tilde (~) & Braces ({ }) in Menu Actions . 49
Order of Evaluation . . . . . . . . . . . . . . 49
Function Reference . . . . . . . . . . . . . . . 50
&#, {&#} or
{&# parameter1 parameter2 ... parameter9} . . 50
%# or {%#} . . . . . . . . . . . . . . . . . . . 51
%0 or {%0} . . . . . . . . . . . . . . . . . . . 53
~ (Tilde) . . . . . . . . . . . . . . . . . . . 53
! (Exclamation Point) . . . . . . . . . . . . . 53
|| (Double Vertical Line) . . . . . . . . . . . 54
@@batch-file . . . . . . . . . . . . . . . . . . 55
{?}, {??}, {?prompt} or {??prompt} . . . . . . . 56
{%environment variable%} . . . . . . . . . . . . 58
{BEEP} . . . . . . . . . . . . . . . . . . . . . 58
{BEEP!} . . . . . . . . . . . . . . . . . . . . 59
{CK drive-letter} . . . . . . . . . . . . . . . 59
{COLOR foreground background} . . . . . . . . . 60
{CONFIRM}, {CONFIRM prompt}
or {CONFIRM prompt~seconds~Y/N} . . . . . . . 61
{CURSOR start-line end-line} . . . . . . . . . . 61
{DEFAULT reply-to-prompt} . . . . . . . . . . . 62
{DELAY #} . . . . . . . . . . . . . . . . . . . 62
{DIAL [modem-cmd1~...modem-cmd15~] phone-number} 63
{DIR}, {DIR!}, {DIR path\mask}, {DIR! path\mask} 65
{EXIT} or {QUIT} . . . . . . . . . . . . . . . . 67
{FILE}, {FILE!}, {FILE path\mask} or
{FILE! path\mask} . . . . . . . . . . . . . . 67
{GETPROJECT} . . . . . . . . . . . . . . . . . . 69
{KEY k1 k2 ... k15} . . . . . . . . . . . . . . 69
{LOGOFF} . . . . . . . . . . . . . . . . . . . . 72
{MENU ###} . . . . . . . . . . . . . . . . . . . 72
{NOCLEAR} . . . . . . . . . . . . . . . . . . . 73
{PROJECT} . . . . . . . . . . . . . . . . . . . 73
{REBOOT} . . . . . . . . . . . . . . . . . . . . 74
{RETURN} . . . . . . . . . . . . . . . . . . . . 74
{RUN program/command/batch-file} or
{RUN! prgram/command/batch-file} . . . . . . . 75
{SELECT MenuTitle~Choice1~...~Choice15} or
{VSELECT MenuTitle~Choice1~...~Choice15} . . . 76
{SETPROJECT project-data} . . . . . . . . . . . 77
{STEP} . . . . . . . . . . . . . . . . . . . . . 78
{USER} . . . . . . . . . . . . . . . . . . . . . 78
TRACKING PROJECTS AND PEOPLE . . . . . . . . . . . . . . 79
Using HDM.LOG . . . . . . . . . . . . . . . . . 79
To activate the log file . . . . . . . . 79
page 5
HARD DISK MENU SYSTEM Version 4.60
Viewing HDM.LOG . . . . . . . . . . . . . . . . 79
Tracking Projects . . . . . . . . . . . . . . . 80
Using {GETPROJECT} to Enter a Project Name . . . 81
Using {PROJECT} to Retrieve a Project Name . . . 81
To add project name to your Title Box . 81
Using {SETPROJECT} with Projects . . . . . . . . 82
Creating Reports . . . . . . . . . . . . . . . . 82
To load HDM.LOG (or any log file) . . . 82
Using Filters . . . . . . . . . . . . . . . . . 83
To select certain records for display . 83
To save displayed list to a log file . . 84
Designing Reports . . . . . . . . . . . . . . . 84
To open a report format . . . . . . . . 85
To create a report format . . . . . . . 85
To set up filters for your report . . . 85
To print your report to the screen . . . 86
To print your report to a printer . . . 86
To print your report to a file . . . . . 87
ADDING SECURITY . . . . . . . . . . . . . . . . . . . . 88
Selecting Your Level of Security . . . . . . . . 88
An Open System . . . . . . . . . . . . . 88
A Secure System . . . . . . . . . . . . 88
Security by the Numbers . . . . . . . . . . . . 88
Creating Security Levels . . . . . . . . . . . . 90
To create or change a security level . . 90
Adding Users . . . . . . . . . . . . . . . . . . 91
To add or change user accounts . . . . . 91
To change your logon password . . . . . 92
Restricting Access . . . . . . . . . . . . . . . 92
Hierarchy of Security . . . . . . . . . . . . . 93
To hide or restrict access to Top Menu . 93
To restrict access to a pull-down menu . 94
To restrict use to a menu entry, menu
page or menu file . . . . . . . . . . 95
To prevent changes to a menu file . . . 95
Removing Security . . . . . . . . . . . . . . . 96
To remove security . . . . . . . . . . . 96
USING HDM ON A NETWORK . . . . . . . . . . . . . . . . . 97
Separate X.BATs . . . . . . . . . . . . . . . . 97
A Different Directory . . . . . . . . . . . . . 97
A Different File Name . . . . . . . . . . . . . 97
Sharing Local and Network Menu Files . . . . . . 98
Automated Logins . . . . . . . . . . . . . . . . 99
Automatic Logoff . . . . . . . . . . . . . . . . 100
To create an automatic logoff . . . . . . . . . 100
Other Tips . . . . . . . . . . . . . . . . . . . 100
page 6
HARD DISK MENU SYSTEM Version 4.60
HDM MENU STRUCTURE . . . . . . . . . . . . . . . . . . . 101
Pull-Down Menu Commands . . . . . . . . . . . . 101
MENU (Alt-M) . . . . . . . . . . . . . . . . . . 102
PAGE (Alt-P) . . . . . . . . . . . . . . . . . . 103
SECURITY (Alt-S) . . . . . . . . . . . . . . . . 103
LOCAL (Alt-L) . . . . . . . . . . . . . . . . . 105
GLOBAL (Alt-G) . . . . . . . . . . . . . . . . . 106
EXIT (Alt-X) . . . . . . . . . . . . . . . . . . 107
APPENDIX A: OVERVIEW OF DOS . . . . . . . . . . . . . . 109
Popular Terms . . . . . . . . . . . . . . . . . 109
DOS: From the Command Line . . . . . . . . . . . 110
APPENDIX B: IMPORTANT TABLES . . . . . . . . . . . . . . 111
HDM Keystrokes and Key Combinations . . . . . . 111
Startup Switches . . . . . . . . . . . . . . . . 116
After the HDM Command . . . . . . . . . . . . . 116
DOS Environment Variables . . . . . . . . . . . 118
Picking Colors . . . . . . . . . . . . . . . . . 119
Choices for the {KEY} Function . . . . . . . . . 119
APPENDIX C: COMMON QUESTIONS AND ANSWERS . . . . . . . . 121
APPENDIX D: ERROR MESSAGES . . . . . . . . . . . . . . . 125
APPENDIX E: TECHNICAL SUPPORT . . . . . . . . . . . . . 129
Program Distribution . . . . . . . . . . . . . . 129
HDM Upgrades . . . . . . . . . . . . . . . . . . 129
APPENDIX F: NEW FEATURES . . . . . . . . . . . . . . . . 130
New and Improved Functions . . . . . . . . . . . 130
New and Improved Startup Switches . . . . . . . 131
New and Improved Pull-Down Menus . . . . . . . . 131
APPENDIX G: ORDER FORM . . . . . . . . . . . . . . . . . 133
User Information . . . . . . . . . . . . . . . . 134
MasterCard and Visa Orders . . . . . . . . . . . 134
Orders from outside the United States . . . . . 135
Notice to new users . . . . . . . . . . . . . . 135
page 7
HARD DISK MENU SYSTEM Version 4.60
HOW TO USE THIS GUIDE
Thank you for choosing the Hard Disk Menu System. You've taken
the first step toward making your computing easier and more
efficient. With a keystroke or two, you'll be able to start
your favorite programs.
If you are unfamiliar with DOS, we recommend you read Appendix
A: "Overview of DOS".
Before you continue, you should be familiar with the following
conventions:
MENU CHOICES: This program accesses pull-down menus. However,
you can also access the same menus from "shortcut" keys.
NOTE: For your convenience, this manual lists the shortcut keys
for each pull-down menu choice in parentheses.
KEYSTROKES: Throughout this documentation, we mention key
combinations such as "Ctrl-F10" and "Alt-M." This means to HOLD
DOWN the first key and PRESS the second. Remember that F1-F12
are the special function keys found on the top or left side of
your keyboard. For example, F1 is NOT the two keys "F" and "1".
OTHER KEYS: The Hard Disk Menu System uses other keys to do
certain functions. They are:
* Esc (Escape key) - usually exits you from a menu or feature.
If using a mouse, press the right mouse button instead of Esc.
* Up/Down arrows - move the cursor from one line or menu choice
to the next.
* Home - jumps the cursor to the start of a line or menu.
* End - jumps the cursor to the end of a line or menu.
* F1 - displays the Help menu and screens.
* F10 - displays the Top Menu where all pull-down menus are
located.
* Alt-F10 - displays the last used pull-down menu.
NOTE: All keystrokes and key combinations for HDM are listed in
a table in Appendix B.
page 8
HARD DISK MENU SYSTEM Version 4.60
MOUSE SUPPORT:
HDM fully supports Microsoft and Logitech compatible mice.
To "click" on an object on the menu screen, move the mouse
block pointer to one of the "hot spots" listed below. Then,
press the left mouse button. Pressing the right mouse button
always cancels the current procedure, just like pressing the
Escape (Esc) key. Most newer mouse drivers will allow you to
reverse the actions of these two buttons.
* Click on any entry in the HDM main screen, Top Menu,
pull-down menus, or any other menu using the left button to
start that entry.
* Click on any key assignment at the bottom of the screen or at
the bottom of any window to perform the action of that key.
* Click on the top Date/Time line to open the Top Menu.
* Click on the upper right corner of the screen for Help.
* Click outside an open window to close it or just press the
right mouse button no matter where the mouse cursor is located.
* Click on the up or down arrows to move the cursor bar up or
down the menu entries. Click on the left or right arrows to
move the cursor bar through the Page Index.
* You can adjust the vertical and horizontal motion sensitivity
of the mouse from the Global pull-down menu.
PROCEDURES:
Step-by-step procedures are marked by a heading preceded by two
exclamation points (!!) and usually the word "To." An example
of how a procedure looks is:
!! To understand a procedure:
DOS COMMANDS:
Commands are usually preceded by the words "At the DOS prompt:"
and consist of a command followed by the phrase "(press Enter)",
which means to press the Enter key. (The Enter key is the
L-shaped key found on the right side of your keyboard). Here's
an example:
DIR (press Enter)
page 9
HARD DISK MENU SYSTEM Version 4.60
GETTING STARTED
The Hard Disk Menu System, or HDM, is a powerful yet flexible
menuing system. It puts a friendly face on the Disk Operating
System, or DOS. Yet, HDM is NOT a terminate-and-stay-resident
(TSR) program. All memory is always available to your programs.
This program was first developed in Basic in 1982 by Jim Hass.
In 1986, HDM II (rewritten in Turbo Pascal) became a shareware,
or "try-before-you-buy" program. Registered users receive a
published, illustrated and fully indexed version of this manual,
a license for the number of copies registered, and the latest
version of this software. They also receive additional programs
from MicroFox, technical support by phone, mail, and CompuServe,
and are the first to receive notices of major upgrades to HDM.
WHAT IS SHAREWARE?
The user supported software concept (also known as "Shareware")
is an attempt to provide quality software at low cost. Both the
user and author benefit from this plan. The user will benefit by
being able to "test drive" software thoroughly before purchasing
it. The author benefits by being able to enter the commercial
software market while avoiding the high cost of commercial
distribution.
This concept helps many independent authors and small companies
that otherwise would be discouraged from developing and promoting
their ideas. It can only work with your support. If you obtain a
user supported program from a friend and are still using it after
a few weeks, then it is obviously worth something to you, and a
registration fee should be paid.
This software is distributed under the user supported software
concept. Though HDM is copyrighted, you are encouraged to copy
and distribute this program to others. You are granted a 30-day
limited license to test drive the Hard Disk Menu. After the 30
day trial period a registration fee is required for continued
use of HDM or else you must stop using the Hard Disk Menu and
remove from your system.
See Appendix G for more information about registering HDM.
page 10
HARD DISK MENU SYSTEM Version 4.60
WHY USE HDM?
Using DOS can be frustrating. When you start your computer, the
screen is blank except for the DOS command line, which may look
as bare as this:
C:\>
Typing the commands that tell DOS what you'd like it to do can
be cryptic and confusing. For example, here's a command to
simply copy a file from one subdirectory to another and verify
the copying went smoothly:
COPY C:\WP\LET\PCR\WORD.REV C:\WP\MISC\ /V (press Enter)
The Hard Disk Menu System, or HDM, doesn't require you to
"speak" the DOS language. HDM is an easy-to-use DOS shell (or
menu system) that runs on top of DOS. This helps the person
unfamiliar with DOS without slowing the more proficient user.
Like a restaurant menu, HDM gives you a way to choose quickly
what you want to do. HDM bypasses DOS so computing is enjoyable
and useful.
However, the Hard Disk Menu System is not a memory-resident
program. When you run a program using HDM, HDM gets out of
memory completely so that all system RAM (random access memory)
is available to your program. When your program finishes, HDM
is automatically called back into memory.
HDM has virtually unlimited potential. You can have up to 1,000
menu files containing 26 menu pages each. Each menu page can
have up to 10 menu entries. Altogether, HDM allows you to
choose from up to 260,000 entries.
You use the Hard Disk Menu System in two ways: You simply can
use the menus that someone has already created or design your
own, either automatically or manually.
HDM is "push-button easy." Once set up, HDM lets you start
programs and organize your files with a press of one or two
keys. For example, you could press the letter "S" and "1" to
start your spreadsheet program and load your budget worksheet.
Thousands of customers find HDM:
* Compatible * Flexible
* Powerful * Fast
* Networkable * Affordable
page 11
HARD DISK MENU SYSTEM Version 4.60
Compatible
* Runs any DOS or Microsoft Windows application, including
memory-resident programs (TSRs).
* Compatible with monochrome, Hercules, CGA, EGA, VGA, XGA, etc.
* Compatible with MS-DOS, PC-DOS, DR-DOS, NDOS and 4DOS.
Powerful
* Allows you to design up to 260,000 menu entries and 1000
menus.
* Stack many programs, DOS commands and functions in a single
menu entry.
* Point-and-shoot mouse control.
* Built-in screen-blanker with custom message.
* Requires no memory (NOT A TSR!).
* Include file and directory lists with menu entries.
* Passes keystrokes to programs.
Flexible
* Set defaults and prompt the user for input, directories and
file names.
* Reorganize menu pages and entries easily as your needs change.
* Customize colors, borders, menus, windows and help screens.
* Extensive on-line help that can be completely customized.
* Temporarily exit to DOS.
* Inactive and timed execution to run programs automatically.
* Built-in phone dialer for Hayes-compatible modems.
* Customizable logo screen, title lines, menu index & entries.
* Builds menus automatically with Auto Build.
Networkable
* Built-in network support.
* Multi-level security for commands, menus and users.
* Provide multiple user log on/off with optional password
protection.
* Log and report usage of programs and projects.
Affordable
* Network, educational, corporate and site licenses available.
* Technical support by phone, mail and CompuServe.
* Purchasing information: 216-659-9489
VISA and MasterCard (EuroCard/Access) gladly accepted.
page 12
HARD DISK MENU SYSTEM Version 4.60
SYSTEM REQUIREMENTS
The Hard Disk Menu System requires:
* Only 320K of RAM
* IBM PC/XT/AT, PS/1, PS/2 or compatible computer
* DOS 2.0 or later
* Monochrome, Hercules, CGA, EGA, VGA, XGA video adapters
If desired, you can use HDM with a Microsoft- or
Logitech-compatible mouse, or other pointing device. HDM
supports common networks like Novell, 3COM, Banyan, Token-Ring,
TOPS, etc.
KEY FILES
HDM relies on these primary files:
* HDM.BAT, the batch file that starts HDM.
* HDM4.EXE, the main HDM program.
* X.BAT, the batch file that returns you from the DOS command
line to the exact point from which you left HDM.
* HDM.CFG, the file that contains the global settings for all HDM
menu files.
* HDM.000-HDM.999, HDM menu files.
* HDMHELP.EXE, the HDM help file.
* HDMLIST.EXE, the HDM Report Module.
* HDMDIAL.EXE, the HDM phone dialer.
THREE EASY STEPS
To use HDM, follow these steps:
1. Install HDM onto your computer.
2. Run HDM.BAT.
3. Customize your menu entries and HDM options.
page 13
HARD DISK MENU SYSTEM Version 4.60
INSTALLING AND STARTING HDM
Installing and using HDM is very easy.
!! To install HDM:
1. Put the diskette in your disk drive (we'll assume drive A).
2. Type the following:
A:INSTALL (press Enter)
NOTE: If you are using your second floppy disk drive, use "B:"
instead of "A:". If you got HDM from a BBS or CD-ROM you can
install from any drive and directory. If you have a previous
version of HDM, the Install saves all your previous settings.
3. If your disk has multiple MicroFox Install files (*.INS),
a list of those files is displayed. Choose the HDM file.
4. The INSTALL logo appears. Accept the default installation
directory (C:\HDM) or change the displayed drive/directory
to your own choice. Press Enter to begin the installation.
5. Decide if HDM should start automatically.
If you want HDM to start every time you turn on your computer,
you need an AUTOEXEC.BAT (or startup) file. The last two lines
of the AUTOEXEC.BAT file should read:
CD \hdm
HDM
where "\hdm" is the directory where you instructed HDM to be
installed. The Install program can add these lines for you.
With your permission, Install will look for the AUTOEXEC.BAT
file and change it. If one is not found, Install will create
one for you. The program also adds the HDM directory to your
PATH statement so the X.BAT file - which is used to return to
HDM after a menu choice is run - can be easily found.
Below is a sample AUTOEXEC.BAT modified by the Install program:
ECHO OFF
PROMPT $P$G
PATH C:\;C:\DOS;C:\HDM
CD \HDM
HDM
page 14
HARD DISK MENU SYSTEM Version 4.60
If you are using DOS (disk operating system) older than version
3.30, HDM uses COMMAND.COM (or 4DOS/NDOS) to run batch files.
If COMMAND.COM is in your root (main) directory, then add the
following to your AUTOEXEC.BAT before starting HDM:
PATH c:\
where "c:\" is the path to where your COMMAND.COM file is
located. If you use DOS 3.30 or greater, the above path command
is not necessary because the DOS CALL command will be used to
run batch files instead of COMMAND.COM.
5. Start HDM.
After HDM is installed, you can immediately start HDM and begin
using it.
RUNNING HDM
If you allowed the Install program to modify your AUTOEXEC.BAT
file, HDM will begin every time you start your computer. If you
just installed HDM, you'll need to restart your computer so it
can be loaded automatically. Otherwise, use the next procedure:
!! To start HDM:
The HDM program must be started from the directory that
contains the HDM files.
1. Change to the directory where HDM was installed: Type:
CD \hdm (press Enter)
where "hdm" is the name of the directory where HDM was
installed. HDM is the default directory.
2. Type:
HDM (press Enter)
This starts the HDM program. The opening screen of HDM features
the HDM logo and registration information. You can change this
logo to your own by creating a HDM.HDR logo/header file. For more
information, see the "Customizing HDM" chapter and the installed
sample logo/header file HDMDEMO.HDR. Press any key to continue to
the main HDM screen.
page 15
HARD DISK MENU SYSTEM Version 4.60
!! To exit HDM:
1. Press F10 to open the Top Menu.
2. Press "X" to open the Exit menu.
3. Press "X" to exit HDM or move your cursor to the choice "eXit
HDM" and press Enter.
NOTE: A quicker way to exit is to simply press the shortcut key
F3.
!! To return to HDM:
After you've exited HDM, you can quickly return using the batch
file called X.BAT. The X.BAT file is called the temporary work
file because it keeps track of what you were working on in HDM
before you exited. The X.BAT is also an important tool used to
run your menu selection and to return you to the spot from
which you ran that menu selection.
1. From the DOS prompt, type:
X (press Enter)
X.BAT runs, returning you to HDM.
NOTE: Network users may be especially interested in the "SET
X=" environment variable. With it, users can have temporary
work files with unique names, instead of "X.BAT". See the
"Using HDM on a Network" chapter for this and other tips on
using HDM with a network.
CONFIGURING HDM
You can configure HDM when you start by either adding extra
parameters (or switches) after the word "HDM" or using DOS
environment variables. What can you configure? You can:
* Jump to or automatically start a specific menu entry.
* Display free disk space for a certain drive.
* Tell HDM where a backup copy of the menu file is kept.
* Go to a certain directory when you press F3 to exit to DOS.
* Specify a global path where HDM's configuration file is
located.
* Enable HDM to use up to 16 background and foreground colors.
* Disable the date and time from being constantly updated in the
main HDM screen.
page 16
HARD DISK MENU SYSTEM Version 4.60
* Bypass the HDM logo screen or display your own logo screen.
* Keep track of what you or others use in HDM in a special log.
* Load a specific menu file instead of the default HDM.000.
* Save keystrokes from the DOS keyboard buffer for use with HDM.
* Change the color of the screen border.
* Specify the path where the menu entries and variables are
stored.
* Read a user ID from the named DOS environment variable to
automate the user logon procedure.
* Increase the speed of the screen.
* Set the video mode to monochrome (black and white).
* Set the path where HDM's temporary work file is stored.
For information on using these switches, see the chapter
"Customizing HDM" later in this manual.
ON-LINE HELP
HDM includes on-line help (on-screen help text) so you can be
somewhat free of the documentation. To use it, press F1 or use
your mouse to click on the Help choice in the lower left corner.
A list of help topics are displayed on the left side of the
screen. You can move up and down through the help topics or
press the letter of the topic you want to view. The information
about that topic will be displayed in the window on the right.
NOTE: You can also create your own help screens for menu entries
and menu files. In the "Customizing HDM" chapter, we discuss how
to do this. The sample demo files A1DEMO.000, HELPDEMO.000 and
HELPDEMO.HDM installed in your HDM directory are examples of
such customized help.
While you are in the help system, you can press F2 to see a list
of available HDM documentation files. The HDM help system will
list any file with a DOC extension that's in the same directory
as the HDMHELP.EXE file. This means you can customize the list
of files by moving *.DOC files into and out of that directory.
To view information from one of the files, highlight it, then
press the Enter key. You can scroll through the file using the
arrow keys or click on the scroll bars with your mouse. The Home
key takes you to the beginning of a line and the End key takes
you to the end (far right) of a line. Ctrl-Home goes to the top
of the file (first line) and Ctrl-End goes to the end of the
file (last line). Press F2 to send the file to your printer.
page 17
HARD DISK MENU SYSTEM Version 4.60
USING HDM
The Hard Disk Menu System has almost unlimited potential. You can
have up to 1,000 menu files containing 26 menu pages each. Each menu
page can have up to 10 menu entries. Altogether, HDM allows you to
choose from up to 260,000 entries.
HDM has three components:
* 1000 menu files.
* 26 menu pages in each menu file.
* 10 menu entries in each menu page.
When you design a menu file, menu page or menu entry, you
provide its description.
THE STRUCTURE OF HDM
In the figure below is the basic design of HDM.
Date Time Mode
┌──────────────────────────────────────────┐
┌─│Menu Page Security Local Global Exit │} Top Menu (F10)
┌─│ ├──────────────────────────────────────────┤
│ ├─│ │
├─│ │ User Defined Titles │} Title Lines
│ │ │ │
│ │ ├───────────────┬──────────────────────────┤
│ ├─│A Page Desc. │1 Menu Entry Description │
├─│K│B │2 │
│U│L│C │3 │
│V│M│D │4 │
│W│N│E (26 PAGES) │5 (MENU ENTRIES) │} User Menu
│X│O│F (PER FILE) │6 (10 PER PAGE) │
│Y│P│G │7 │
│Z│Q│H │8 │
│ │R│I │9 │
│ │S│J │0 │
│ │T├───────────────┼──────────────────────────┤
│ ├─│ HDM.000 │ █ <--Choice? HDM V.VV │} Version Number
├─│ └─────────^─────┴──────────────────────────┘
│ └───────────│────┴──────────────────────────┘
└─────────────│───┴──────────────────────────┘
│
Current Menu File (HDM.000)
HDM allows up to 1000 menu files, HDM.000 through HDM.999.
page 18
HARD DISK MENU SYSTEM Version 4.60
When you start HDM, menu file HDM.000 is displayed unless you
specify otherwise from your startup file.
Each menu file contains 26 menu pages, one for each letter of
the alphabet. The menu pages for HDM.000 are listed on the left
side of the screen. The text following each letter you provide
to describe each menu page. This list of menu pages is called
the Page Index.
On the right side of the screen are 10 numbered menu choices
for the current menu page. The text after each choice describes
that menu entry. This is called the User Menu.
NOTE: The design of the HDM main menu can be changed so the
Page Index is on the right side of the screen. See the chapter
"Customizing HDM" for the procedure to change this.
At the top of the screen is the Title Box. The Title Box can
contain text to describe the menu file or it can contain your
name. See the chapter "Customizing HDM" for more information on
how to do this.
Each menu entry can start a program, run a batch file or
execute any DOS command. An entry also can perform multiple
steps that can include the possibilities above plus special HDM
functions and macros. For example, one menu function checks if
a diskette is in the floppy drive. These menu functions are
described in detail in the "Using Functions" chapter.
OPENING THE TOP MENU
Either pressing the F10 or slash key (/) displays a horizontal
menu at the top of the screen. Pressing Alt-F10 or the
backslash key (\) can be faster since it opens the last
pull-down menu used. If you use a mouse, simply click on the
top line of the screen. This is called the Top Menu. The Top
Menu is used to customize the design and security of HDM.
The Top Menu includes the following pull-down menus: Menu,
Page, Security, Local, Global and Exit. Below are the choices
and what they do:
* MENU - adds, changes, deletes, moves, copies or switches menu
entry descriptions and their associated menu actions. When you
first use HDM, you use this menu to create menu entries for
your applications.
* PAGE - renames, copies, switches or removes menu pages.
page 19
HARD DISK MENU SYSTEM Version 4.60
* SECURITY - set up several people to use HDM, such as adding
user IDs, security levels and passwords.
* LOCAL - customizes HDM for the current menu file, such as
colors, border lines, date formats, etc.
* GLOBAL - customizes HDM for ALL menu files, such as mouse
speed, phone parameters, etc.
* EXIT - leaves HDM, temporarily exits to DOS to run other
programs or batch files, or prints usage reports.
SELECTING A MENU ENTRY
The power of HDM centers around the individual menu entry. The
menu entry is the choice that runs your program file, batch
file or special HDM function. It also can run a combination of
these. In other words, selecting a menu entry causes some
specific action to happen.
You start a menu entry by either pressing its number or moving
the cursor to it and pressing the Enter key. If using a mouse,
simply point to it and press the left mouse button.
Each menu page is limited to 10 menu entries, so you may need
to switch to another menu page. You change between the 26 menu
pages by pressing the PgUp or PgDn keys to move to the previous
or next menu pages, respectively. To go to a specific menu
page, press the A through Z keys to go directly to that
lettered page.
NOTE: HDM will only go to a menu page that has at least one
menu entry in it. To go to that menu page, first add a menu
entry to it.
If using a mouse, you can point to the menu entry and press the
left mouse button.
With some HDM pull-down menus, you may need to refer to a
specific menu entry on a specific page. A simple two-character
style is used-the letter of the page followed by the menu
entry. For example, the 4th menu entry of page C would be
called "C4".
To go to another menu file, you must use the MENU function
{MENU ###}. The menu files are numbered from zero to 999.
For more information about HDM functions, see the chapter
"Using Functions".
page 20
HARD DISK MENU SYSTEM Version 4.60
CREATING MENU ENTRIES
Each HDM menu entry has two parts:
* Menu description. The menu description is displayed on the
screen to describe the menu entry choice. When adding menu
entries, you provide the description. The description can be
up to 48 characters long.
* Menu action. The menu action is the part of the menu entry
that tells HDM what to do. The user of the menu does not see
this part of the menu entry.
The menu action can contain anything that you would normally
type to run a program or place in a DOS batch file. You also
can use special HDM functions and macros that give you
additional flexibility and power. These functions are described
in detail in the "Using Functions" chapter.
You can build a menu action two ways:
* Manually.
* With Auto-Build.
!! To build a menu entry manually:
1. Select "Add Entry" from the Menu menu (Ins).
2. Type a number or move your cursor to the empty menu entry
where you want to add one and press Enter. If using a mouse,
click on the choice with the mouse pointer.
3. Enter a description of up to 48 characters for the menu
entry and press Enter.
4. Enter the menu action.
The menu action can be up to 255 characters long and can
contain multiple steps. Each step is separated from the others
by the tilde (~) character.
EXAMPLE: If you were using a batch file that went to your BASIC
directory and loaded the programming game GORILLA, then you
normally would type:
C: (press Enter)
CD \BASIC (press Enter)
QBASIC GORILLA (press Enter)
page 21
HARD DISK MENU SYSTEM Version 4.60
The equivalent menu action would look like this:
C:~CD \BASIC~QBASIC GORILLA~
5. Press F2 to save your menu entry.
The menu description you entered now is displayed in the menu
entry you added.
6. If desired, test your menu entry.
!! To auto-build a menu action:
When you add or change a menu action, HDM can build the menu
action for you automatically with Auto-Build.
1. Select "Add Entry" from the Menu menu (Ins).
2. Type a number or move your cursor to the menu entry you want
to add and press Enter. If using a mouse, click on the choice
with the mouse pointer.
3. Enter a description of up to 48 characters for the menu
entry and press Enter.
4. Press F4.
A window is displayed in which you type the following:
* Drive where your program resides.
* Directory where the program is located.
* Program name (this must be a file ending in .COM, .EXE,
.BAT or .BTM, but you don't include these extensions).
* Any extra parameters needed to run the program.
EXAMPLE: If you wanted to run Microsoft Windows and load its
clock automatically, you would type:
Drive: C
Directory: \WINDOWS
Program: WIN
Parameters: CLOCK
5. Fill in the blanks or search for your program.
Complete the blanks as required. If you need to search for the
program or batch file to run, press F4. HDM displays a list of
drives and directories on the highlighted drive. Using the
page 22
HARD DISK MENU SYSTEM Version 4.60
up/down arrows, move the highlight bar to the directory where
you think your program is located and press Enter.
To speed searching, you can jump to a specific directory or
file by pressing the first letter with which it begins. By
pressing the letter repeatedly, the cursor highlights the next
directory or file that starts with that letter and then starts
at the top again.
Press Enter on the program name to complete the blanks in the
Auto-Build window. If you want to change drives, press F4 and
move the up/down arrows to a different drive and press Enter.
6. Press F2 to save your menu entry.
The menu description you entered now is displayed in the menu
entry you added. The menu action is built automatically for
you. HDM even checks the drive and directory to make sure the
program really exists there.
NOTE: If you get a warning message that the file couldn't be
found, make sure the directory begins with a back slash (\) and
that everything is spelled correctly.
7. If desired, test your menu entry.
Using Tilde (~) and Braces ({ }) in a Menu Action
You may need to use the braces ({ }) or tilde (~) in your menu
action for other purposes than for what HDM uses them. However,
as seen above, these keys are reserved by HDM. If you need to
use any of these characters for other purposes, use these
substitutes:
To use: Instead use:
======= ============
{ Ctrl-Q
} Ctrl-P
~ Ctrl-Z
These special characters will be converted to the correct
characters.
page 23
HARD DISK MENU SYSTEM Version 4.60
MODIFYING MENU ENTRIES
Once made, a menu entry can be modified in several ways. A menu
entry can be changed, duplicated, erased, moved to another menu
page and swapped with another menu entry. These actions can be
done even if the menu entries are on different menu pages.
NOTE: If the menu entry you want to change has a higher
security level than your own, you must enter the password for
the higher security level before you can change the menu entry.
For more information, see the chapter "Adding Security" later
in this manual.
!! To change a menu entry:
1. Select "Change Entry" from the Menu menu (F2).
2. Select the menu entry you want to modify.
Select the number of the menu entry or highlight it and press
Enter. If the menu entry is on a different menu page, press the
letter of the menu page and then the number of the menu entry.
3. Edit the description and menu action.
If you need help building the menu action, press F4 for the
auto-build facility. Then, you can enter just the drive letter,
directory, program and parameters; or press F4 a second time to
choose an executable file. Then HDM builds the menu for you.
4. Press F2 to save the revised menu entry or press Esc to
cancel any changes.
To test your changes, press Enter on the menu entry.
!! To duplicate a menu entry:
1. Select "Duplicate Entry" from the Menu menu (F4).
2. Select the menu entry you want to copy.
3. Select the empty menu entry where you want to place the copy.
Select the number of the menu entry or highlight it and press
Enter. If the menu entry is on a different menu page, press the
letter of the menu page and then the number of the menu entry.
!! To erase a menu entry:
page 24
HARD DISK MENU SYSTEM Version 4.60
1. Select "Erase Entry" from the Menu menu (Del).
2. Select the menu entry you want to remove.
3. If you want to erase the entry, press Enter. Otherwise,
press Esc.
The menu entry is erased (both its menu description and menu
action) and the security level of that menu entry reverts back
to "00."
!! To move a menu entry:
1. Select "Move Entry" from the Menu menu (F6).
2. Select the menu entry you want to move.
3. Select the empty menu entry where you want to place the menu
entry.
The menu entry is moved. The spot from which you moved the menu
entry is left empty and its security level reverted back to
"00".
!! To switch two menu entries:
1. Select "Switch Entries" from the Menu menu (F8).
2. Select one of the two menu entries you want to swap.
3. Select the destination for the menu entry to be swapped.
The menu entries are swapped, including their menu
descriptions, menu actions and security levels.
SEEING YOUR MENU ACTIONS
Sometimes, you may want to move your cursor to various menu
entries and view-but not change-their menu actions. Instead of
pressing F2, which is used to change that entry, you can use a
feature called Action Display.
!! To see your menu action:
1. Select "Action Display" from the Local menu (Shift-F1).
The title lines in the Title Box at the top of the User Menu
are replaced by the menu action of the highlighted menu entry.
page 25
HARD DISK MENU SYSTEM Version 4.60
When you move your cursor to other menu entries, the menu
actions for those entries are displayed in the title box.
This choice acts as a toggle; choosing it again returns the
title box to normal. Seeing your menu actions does not affect
HDM performance or operation; you can leave this choice on as
long as you'd like.
NOTE: This choice only affects the current menu file, not all
files.
2. To return the title box to normal, press Shift-F1 again.
SAVING YOUR CHANGES
You normally do not have to save your changes to your entire
HDM menu system. Why not? HDM saves your changes automatically
whenever you run a menu entry, return to the logo screen, press
F1 for help or after one minute of not using the keyboard or
mouse.
If you want to turn your computer off or reboot it immediately,
you may want to save your changes manually, rather than have
HDM wait for one minute of inactivity. How do you tell if you
have changes to save? An asterisk (*) appears in the lower
right corner when there are changes yet to be saved.
!! To save your changes manually:
1. Select "Write File" from the Menu menu (Ctrl-F10).
All changes made in HDM since the last save to disk are written
to your system's disk.
UNDOING YOUR CHANGES
HDM lets you undo changes to menus and input fields (areas in
which you type text or numbers).
For menus, you can undo your changes by pressing Ctrl-U. To
undo your changes, you must press Ctrl-U before your changes
are written to your disk (while there is an asterisk displayed
in the lower right corner).
In an input field, your first new character automatically
overwrites the information already in it. If you have not yet
pressed the Enter key, you can restore the previous contents by
pressing Ctrl-U.
page 26
HARD DISK MENU SYSTEM Version 4.60
MENU ACTION MACROS
Menu action macros make creating menu entries easier. A menu
action macro allows you to recall up to 255 keystrokes you
commonly use with only a few keystrokes. A macro can contain
anything that is allowed in a menu action, including HDM's
powerful functions.
Each menu file (HDM.000-HDM.999) can have 10 local macros (0
through 9). These macros are created through the Local menu
from the Top Level menu.
These macros are called in a menu action by putting an "&" in
front of the macro's number. For example, {&9} refers to macro
#9. (The "&9" is called a macro name.) Any reference to the
macro in the menu action is replaced by the contents of the
macro.
Besides allowing you to type keystrokes, these macros can
accept up to nine parameters.
NOTE: Parameters allow you to store and reuse certain
information in a menu action. These parameters have many uses.
For example, a parameter can contain the name of a file you
want to copy to a diskette and then, in the same menu action,
delete from your hard disk. But you only have to enter the name
once since the parameter can be reused. (These parameters are
similar to DOS batch file replaceable parameters.)
In the menu action macro, you refer to the parameters by using
a percentage symbol (%) followed by the number of the
parameter. (This is called the parameter symbol.) Your menu
action macro may look like this:
{&# %1 %2 %3 %4 %5 %6 %7 %8 %9}
where "#" is the number of the macro.
!! To create a menu action macro:
1. Select "Menu Macros" from the Local menu (Shift-F6).
2. Move to the macro (0 through 9) that you want to create.
For our example, select macro #1.
3. Create your macro.
page 27
HARD DISK MENU SYSTEM Version 4.60
For example, imagine we wanted a macro to list certain types of
files on drive A and then switch to that drive. You'd like to
make this task a macro so you can re-use it on several menu
pages without re-typing the commands.
If we wanted to check for BASIC files (.BAS), we would type:
{CK A}DIR A:*.BAS~PAUSE~A:~
NOTE: {CK A} is one of HDM's many special functions. {CK A}
checks if there is a disk in drive A. It is friendlier than
getting the DOS error message "Drive not ready."
4. Press F2 to save your macro.
Now that you have created the macro, you can create your menu
entry that uses it.
5. Press Insert (Ins) to create your menu entry.
6. Enter your description.
For our example, enter "List Drive A."
7. On the menu action line, enter "{&#}", where "#" is the
number of the macro you created.
For our example, enter {&1}.
8. Press F2 to save your menu entry. Then test it by selecting
it.
SOPHISTICATED MACROS
You can use your macro in more sophisticated ways. For example,
you can use your macro with other functions.
EXAMPLE: Let's use the {?prompt} function, which asks the user
to make a selection. For example,
{?Run BASIC: Enter number for drive 1=A:, 2=B:, 3=C:}
asks you to type "1", "2" or" 3" for the drive number you want
to use. The {?prompt} function is replaced by the number
entered. Now, combine this with the macro symbol (&). In the
menu action line of the menu entry, you would type:
&{?Run BASIC: Enter number for drive 1=A:, 2=B:, 3=C:}BASIC~
page 28
HARD DISK MENU SYSTEM Version 4.60
When you run this entry, select: "1" (drive A). HDM then sees this:
&1BASIC~
which translates into macro #1 and running BASIC, which is:
{CK A}DIR A:*.BAS~PAUSE~A:~BASIC~
HDM then checks drive A to ensure a diskette is in it, lists
all BASIC files (*.BAS), pauses, switches to drive A and runs
BASIC. Using macros is quite simple but simply requires
practice.
NOTE: During the time that the above commands and programs run,
HDM is completely out of memory, taking nothing away from your
programs. When DOS is finished executing these commands and
programs, HDM returns into memory.
EXAMPLE: Here is another fancy macro that checks for certain
files among several directories (\DOS, \BAT and \WP in our
example).
First, imagine macro #9 contains "C:~". The menu action in the
menu entry contains:
{&9 \*.{?Enter extension}}dir \DOS%1~dir \BAT%1~dir \WP%1~
The {?prompt} functions asks for a file extension to find. If
"EXE" is entered, the menu action becomes:
{&9 \*.EXE}dir \DOS%1~dir \BAT%1~dir \WP%1~
Next, the &9 is filled with the first macro (C:~). The "\*.EXE"
becomes parameter %1, which creates the menu action:
C:~dir \DOS\*.EXE~dir \BAT\*.EXE~dir \WP\*.EXE~
HDM then replaces the tildes with an Enter and gives the lines
to DOS to run. The files ending with .EXE are displayed from
those three directories.
EXAMPLE: This next macro shows how the parameters work. Imagine
your macro #3 is empty. Next, create the menu action:
{&3 {?Enter some text}}
Although macro #3 is empty, the {?prompt} function will be
replaced by whatever you type. Since the {?prompt} function is
page 29
HARD DISK MENU SYSTEM Version 4.60
INSIDE the macro, each word will take the place of the
parameters %1 through %9.
For example, if you typed "THIS IS A TEST," then:
This parameter: Holds:
=============== ==============
%0 THIS IS A TEST
%1 THIS
%2 IS
%3 A
%4 TEST
Parameters %5 through %9 would, of course, be empty.
NOTE: %0 is a special parameter that holds the complete reply
to menu functions {?prompt}, {?}, {DIR}, {FILE} or {SELECT}.
See the "Using Functions" chapter for more details about using
%0.
Refer to the "Using Functions" chapter for more information on
using HDM's special functions in your macros.
MODIFYING MENU PAGES
Menu pages are just a collection of menu entries. Each menu
page holds 10 menu entries. In each menu file, there are 26
menu pages, one for each letter of the alphabet.
Once made, a menu page can be modified in several ways. A menu
page can be compressed (so menu entries are closer together),
erased, imported (copied), renamed or swapped with another menu
page.
NOTE: If the menu page you want to change has a higher security
level than your own, you must enter the password for the higher
security level before you can change the menu page. For more
information, see the chapter "Adding Security" later in this
manual.
!! To compress a menu page:
1. Select "Compress Page" from the Page menu (Ctrl-F1).
2. Select the menu page you want to compress.
3. Confirm your choice by pressing Enter, or press Esc to
cancel.
page 30
HARD DISK MENU SYSTEM Version 4.60
The menu entries, along with their security levels, are moved
to the top of the menu page, placing the empty menu entries at
the bottom of the menu page. If there were no empty entries or
all the empty ones were already at the bottom, then nothing
changes on the page.
!! To erase a menu page:
1. Select "Erase Page" from the Page menu (Ctrl-F2).
2. Select the menu page you want to erase.
3. Confirm your choice by pressing Enter, or press Esc to
cancel.
The menu entries on the menu page are erased. Also, the
security levels of that page (and each menu entry on it)
are reset to "00".
If any of the menu entries have a higher security level than
yours, HDM asks you for a password for the highest security
level found. If you enter a correct password, all entries will
be removed from the page. Otherwise, only the entries with
security levels equal to or lower than your security level will
be erased.
!! To import (duplicate) a menu page:
1. Select "Import Page" from the Page menu (Ctrl-F3).
2. Enter the menu file number (000 through 999) and page letter
of the menu page you want to import.
3. Press F2 to import the menu page, or press Esc to cancel.
You'll receive an error message if the menu file from which
you're importing doesn't exist or was done in an older version
of HDM.
4. Select a menu page where you want to place the copy.
The menu entries from the imported menu page are copied to the
current menu page, including their menu description, menu
action and security level. Only the empty menu entries on the
selected page will be filled. Existing menu entries will not be
overwritten by the menu entries of the imported page.
page 31
HARD DISK MENU SYSTEM Version 4.60
!! To rename a menu page:
1. Select "Name Page" from the Page menu (Ctrl-F4).
2. Select the menu page you want to rename.
3. Enter a new name and press Enter.
The new name of the menu page is displayed in the Page Index.
!! To swap two menu pages:
1. Select "Switch Pages" from the Page menu (Ctrl-F5).
2. Select the letter of one of the two menu pages to swap and
press Enter.
3. Select the letter of the second menu page and press Enter.
The menu entries of each page are swapped, including their
descriptions, menu actions and security levels.
TRACKING ACTIVITY
HDM allows you to keep track of who uses what HDM menu entries
and when. For more information on this feature, read the
chapter "Tracking Projects and People."
SECURITY AND NETWORKS
HDM allows you to have up to 99 levels of security. See the
chapter "Adding Security." For tips on using HDM with a
network, see the chapter "Using HDM on a Network."
page 32
HARD DISK MENU SYSTEM Version 4.60
CUSTOMIZING HDM
You can customize several features in HDM, including:
* Changing the look of HDM, such as colors and menu layout.
* Hiding empty menu pages and entries.
* Automatically executing menu entries.
* Changing the keyboard and mouse cursors.
* Changing your modem settings.
* Creating your own screen blanker.
* Adding your own logo in place of the HDM logo.
* Creating your own help screens.
* Configuring HDM each time it starts.
CHANGING THE LOOK OF HDM
You can change how HDM looks in many ways. You can:
* Change the border lines around HDM windows (L).
* Change HDM's colors (L).
* Change how the date and Top Menu appear (L).
* Change where lines appear in the User Menu and Page Index (L).
* Change the positions and look of the User Menu and Page Index
(L).
* Add, change or delete title lines at the top of the main
screen (L).
* Change the character used for HDM's background wallpaper (L).
* Change the system date and time as well as its format (G).
Local changes, just affecting the current menu file, are
indicated by an "L" within the parentheses. Global changes,
affecting all menu files, are indicated by a "G."
!! To change the borders of HDM:
1. Select "Border Lines" from the Local menu (Shift-F2).
2. Select one of the four types of lines to use on the border:
S - single lines
D - double lines
B - bold lines
N - no lines
!! To change HDM's colors:
1. Select "Change Colors" from the Local menu (Shift-F3).
page 33
HARD DISK MENU SYSTEM Version 4.60
2. Select which of the five items to change.
Select which item whose color you want to change and press
Enter. You can also press the first character (M, 1, 2, 3, S,
R) of the item you wish to change. If you use a mouse, just
click on your choice. Select "Restore Defaults" to reset all
colors to HDM's initial values. The righthand box shows what
your current colors look like for each item.
3. If changing a window or the main panel, select one of the
eight color palettes.
Choose a palette by moving the cursor to it and pressing the
Enter key. You can also press the first letter of each palette
(S, B, G, C, R, M, Y or W).
4. If creating your own palette (User Defined), change the
colors of each of the five components.
Move the cursor up or down to go to the different components,
or press the first letter (E, F, W, T or B) of the one you want
to change. Move the cursor left or right to choose the colors.
If using a mouse, simply click on any one color in the row.
Press F2 to save your new colors or press Esc to cancel.
5. If changing the status bar, select a color for both the
foreground and background color.
Move the cursor up or down to choose "Foreground" or
"Background," and then move it right or left to choose the
colors. When done, press F2 to save your color choices.
6. To restore your colors to their normal color, select "R"
(Restore Defaults) from the first color menu and press Enter
to confirm your choice.
NOTE: If you want to change your cursor color, remember this
simple rule: The cursor uses the reverse of the background
color for its foreground and the foreground color as its
background.
!! To change the date and Top Menu:
1. Press "Date/Top Menu" from the Local menu (Shift-F4).
The date/Top Menu changes to a different look. You have three
choices: date and time only, Top Menu commands only, or both
date and Top Menu commands.
page 34
HARD DISK MENU SYSTEM Version 4.60
NOTE: If you display only the Top Menu, the time will appear in
the lower righthand corner.
2. Press Shift-F4 until the date/Top Menu looks the way you'd
like.
!! To change lines in your User Menu and Page Index:
1. Select "Lines in Menu" from the Local menu (Shift-F5).
The lines that separate menus changes to one of four choices,
two if you are using the menu design that has shadows.
NOTE: You can change your menu design by selecting "Switch
Screens" from the Local Menu (Shift-F7), described next.
2. Keep pressing Shift-F5 until the lines appear where you want
them.
!! To change your menu design:
1. Select "Switch Screens" from the Local Menu (Shift-F7).
The positions of the User Menu and the Page Index are either
swapped or shadowed. There are six different designs from which
you can choose.
2. Keep pressing Shift-F7 until you have a menu design you
prefer.
!! To add, change or delete your title lines:
1. Select "Top Box Titles" from the Local menu (Shift-F8).
2. Add or edit each of the four title lines and press F2 to
save.
To delete an entire title line, press Ctrl-Bksp. To restore a
title line to its original contents BEFORE YOU LEAVE IT, press
Ctrl-U.
Besides entering text, you can use some variables and functions
to customize the title lines. They are:
* {USER} - Current HDM user that is logged on
* {PROJECT} - Current HDM project name, if given
* {%COMSPEC%} - Your command processor
page 35
HARD DISK MENU SYSTEM Version 4.60
* {%PATH%} - Your DOS path
* {%environment-variable%} - Other environment variables
For example, if you enter "{USER}'s Menu" and the current user
(from the User ID Security Table) is "Laura Lavish," then the
title box will say "Laura Lavish's Menu."
NOTE: Although there are four title lines, not all of them may
appear, depending on the date/Top Menu choice and menu design
you're using. See the previous few procedures to change these.
!! To change your wallpaper:
1. Select "Wallpaper" from the Local menu (Shift-F9).
2. Select one of the 255 ASCII characters to be your wallpaper
background and press Enter. (ASCII 176 is the default.)
!! To change the date and time (and format):
1. Select "Date and Time" from the Global menu (Alt-3).
2. Select the format for the date.
You can select American (MM/DD/YY) or European (DD/MM/YY).
3. Select a format for the time.
You can select standard (Hr:Mn am/pm) or Military (24 Hr:Mn).
4. If desired, change the date and time.
Select either Date or Time. Enter new values and press F2 to
save. The new date and time will be saved by your PC's clock.
5. Press F2 to save your changes, or press Esc to cancel.
GLOBAL SETTINGS
HDM has five settings that affect all menu files. They are:
* Whether or not to ask for confirmation when exiting to DOS
using F3.
* Whether or not to hide empty menu pages in the Page Index.
* Whether or not to hide empty menu entries in the User Menu.
* Whether or not to wrap to the same page when using the cursor.
* Whether or not to ask for the project name when starting HDM.
!! To confirm exiting to DOS using F3:
page 36
HARD DISK MENU SYSTEM Version 4.60
If you want every user to confirm whether they truly want to
exit to DOS (using F3), you need to turn this feature on. For
quicker exiting, leave this feature unselected.
1. Select "Global Settings" from the Global menu (Alt-4).
2. Press Enter on the choice "Confirm (F3) Exit HDM" until
there is an "X" next to it. If using a mouse, simply click
on your choice.
3. Press F2 to save your changes.
!! To hide empty menu pages:
If you want to have empty menu pages not shown, therefore
creating a "cleaner" looking Page Index, turn this choice on.
1. Select "Global Settings" from the Global menu (Alt-4).
2. Press Enter on the choice "Don't Show Empty Pages" until
there is an "X" next to it. If using a mouse, simply click
on your choice.
3. Press F2 to save your changes.
!! To hide empty menu entries:
If you want to have empty menu entries not shown, therefore
creating a "cleaner" looking User Menu, turn this choice on.
1. Select "Global Settings" from the Global menu (Alt-4).
2. Press Enter on the choice "Hide Empty Menu Entries" until
there is an "X" next to it. If using a mouse, simply click
on your choice.
3. Press F2 to save your changes.
!! To keep the cursor wrapping to the same menu page:
Normally, HDM will let you move the cursor from the top or
bottom of the User Menu to the next or previous menu page,
respectively. In other words, moving the cursor down from the
last menu entry of the current menu page takes you to the first
occupied menu entry on the next menu page. Likewise, moving the
cursor up from the current menu page takes you to the last
occupied menu entry on the previous menu page. This cursor
page 37
HARD DISK MENU SYSTEM Version 4.60
"wrapping" is an alternate way to move between menu pages
besides pressing the letter of another menu page, pressing PgUp
and PgDn, using your mouse, etc. If you want the cursor to wrap
to the same menu page, use this procedure:
1. Select "Global Settings" from the Global menu (Alt-4).
2. Press Enter on the choice "Same Page Cursor Wrap" until
there is an "X" next to it. If using a mouse, simply click
on your choice.
3. Press F2 to save your changes.
!! To ask for a project name when starting HDM:
If you are using the -L startup switch (described later) to
track how HDM is used, you may want to have this switch on.
Then each time HDM starts, you (and others) will be asked what
project you are working on. When the -L switch is used, the
HDM.LOG file will record the project name along with the user
ID, date, time and menu entries that were run. For more
information, see the chapter "Tracking Projects and People."
1. Select "Global Settings" from the Global menu (Alt-4).
2. Press Enter on the choice "Ask for Project Name" until there
is an "X" next to it. If using a mouse, simply click on your
choice.
3. Press F2 to save your changes.
AUTOMATIC EXECUTIONS
You can have HDM automatically run a certain menu entry when:
* A recurring day of the week, day of the month or time happens.
* Certain individuals log onto HDM.
* HDM first starts.
* HDM is isn't used for a certain amount of time.
* An individual logs off HDM.
!! To add, delete or change a timed execution:
A timed execution will automatically run a menu entry based on
the day of the week or month and the time of day. For the menu
entry to be run, you must be in HDM at the time. Once the timed
execution warning window is displayed, you will have 15 seconds
to cancel the running of the entry. Otherwise it will run as
page 38
HARD DISK MENU SYSTEM Version 4.60
scheduled.
1. Select "Timed Execution" from the Global menu (Alt-9).
2. From the table, make your choice:
* To add a new timed event, press Ins. If using a mouse, click
on the first empty event or the word "Ins."
* To change an existing event, highlight the event to change
and press Enter. If using a mouse, click on the event.
* To remove an event, highlight the event to remove and press
Del or, if using a mouse, click on the word "Del."
3. If creating or changing an event, you have these choices:
* Menu file number - Enter the file number where the menu entry
to be run is located.
* Menu entry - Enter the menu entry to be run.
* Every week or month - Enter "W" for weekly or "M" for monthly.
* Days - If you chose weekly, enter up to seven days of the
week you want the entry run (1 = "Sunday"). If you chose
monthly, enter up to seven numbered days of the month you want
the entry run (1 = first of the month).
* Time - Enter the hour and minute you want the entry run. Also
enter whether this entry is to be run in the morning (am) or
afternoon (pm).
4. Press F2 to save your timed execution.
5. Press F2 again to save the entire table of timed execution
entries.
!! To run a menu entry upon logging onto HDM:
HDM allows you to create User IDs to restrict who uses HDM.
When you add these User IDs in the User ID Security Table, you
can force each User ID to run a specific menu entry each time
that User ID is used. For example, you can force certain users
to run a menu entry that logs them onto a network. You can
also set up a "wild card" User ID that will match anything.
For more information, please see the "Adding Security" chapter.
1. Select "User ID Security Table" from the Security menu
(Alt-F9).
2. To add new users, press the Insert (Ins) key. To change
information on an existing user, move your cursor to the
user account you want to change and press Enter.
page 39
HARD DISK MENU SYSTEM Version 4.60
3. Enter the following information for each user.
* User ID (an asterisk here will match any ID at logon time).
* Menu file you want this user to first use when HDM starts.
* Menu entry number you want automatically run for this user
(optional).
* Security level for this user (optional).
* Whether or not to require a logon password for this user
(optional).
NOTE: Each individual's logon password is independent of the
password required for their particular security level. For more
information about setting security levels, see the chapter
"Adding Security" later in this manual.
1. Press F2 to save your changes for this user.
2. Press F2 again to save your changes to the User ID Security
Table.
HINT: You can automate the logon process by using HDM's -U
startup switch. You first set an environment variable that has
the user's name and then refer to that variable in the startup
switches for HDM or through the "SET HDM=" environment variable.
EXAMPLE: Here is an excerpt of an AUTOEXEC.BAT file:
SET HDMUSER=LAURA
CD \HDM
HDM -UHDMUSER
or
SET HDMUSER=LAURA
SET HDM=-UHDMUSER
CD \HDM
HDM
When Laura starts HDM, HDM automatically reads the HDMUSER
variable and enters her User ID for her. Then, the menu entry
that is set for her to run automatically after logging onto HDM
is run.
!! To start a menu entry from AUTOEXEC.BAT:
You can start a menu entry by adding switches to your
AUTOEXEC.BAT file. The -A switch automatically runs the
page 40
HARD DISK MENU SYSTEM Version 4.60
selection specified by the switch -Bp#, where "p#" is the page
and menu entry A1 through Z0. You can use these switches as
either parameters after the "HDM" line in your AUTOEXEC.BAT
file or as an environment variable. In the following examples
showing both methods, the menu entry A3 will be automatically
run when HDM is loaded:
PATH C:\;C:\DOS;C:\UTILS;
SET HDM=-A -BA3
CD\HDM
HDM
or
PATH C:\;C:\DOS;C:\UTILS;
CD\HDM
HDM -A -BA3
!! To change the inactive execution:
An inactive execution will automatically run a menu entry after
the keyboard or mouse is not used for a set number of minutes.
Once the automatic execution warning window is displayed, you
will have 15 seconds to cancel the running of the entry.
Otherwise, the entry will run as scheduled.
1. Select "Inactive Execute" from the Global menu (Alt-5).
2. Enter the number of inactive minutes before the menu entry
runs.
3. Enter the menu file number where the menu entry to be run is
located.
4. Enter the page letter and entry number of the entry to be
run.
5. Press F2 to save your changes.
NOTE: To turn off the inactive execution, enter "00" as the
number of minutes before automatic execution.
!! To run a menu entry upon logging off:
You can have a menu entry automatically run when a user logs
off HDM. The feature can also log the person off after a
certain amount of inactivity. These two activities are
independent of each other. You can have an automatic execution
page 41
HARD DISK MENU SYSTEM Version 4.60
of a menu entry at logoff, automatic logoff after inactivity,
or both.
NOTE: This feature is similar to the "Inactive Execution"
choice found in the Global menu except that it can force a menu
entry to be run every time the user logs off HDM - even without
inactivity.
1. Select "Log Off Automatically" from the Security menu
(Alt-F7).
2. Enter the following:
* Number of inactive minutes before logoff ("00" to turn off).
* Menu file number containing the menu entry to run when the
user logs off.
* Page letter and entry number to run when the user logs off.
3. Press F2 to save your changes.
NOTE: See the "Adding Security" chapter for more information
about security and the individual commands available in the
Security menu.
Changing the Keyboard and Mouse Cursors:
You can change the blinking rate of the keyboard cursor as well
as the sensitivity of the mouse. These changes are global,
affecting all menu files.
!! To change the rate of the blinking cursor:
1. Select "Blinking Cursor" from the Global menu (Alt-1).
2. Select a number from 0 to 99 (slow to fast) and press F2 to
save. (The default value is 77.)
!! To change the speed of the mouse cursor:
1. Select "Mouse Speed" from the Global menu (Alt-6).
2. Select the horizontal speed, from 0 to 99 (slowest to
fastest).
3. Select the vertical speed, from 0 to 99 (slowest to fastest).
4. Press F2 to save or Esc to cancel.
page 42
HARD DISK MENU SYSTEM Version 4.60
MODEM CHANGES
You need to tell HDM what serial port your modem occupies (COM1
through COM4) and what type of phone line you have. When the
{DIAL} function is used, HDM uses this information to dial
phone numbers for you through your modem.
!! To set your serial port and phone type:
1. Select "Phone Parameters" from the Global menu (Alt-7).
2. Select the type of phone you have, whether tone or pulse.
3. Select a serial port from 1 to 4.
4. Set the interrupt number (IRQ) for the chosen serial port.
5. Press F2 to save.
SCREEN BLANKER
HDM has an automatic screen blanker. After a set number of
minutes of inactivity, the screen is blanked out. This prevents
the images of your screen from "burning" into the phosphor of
your monitor after long periods of time. Also, you can enter a
message to be displayed in various positions on the screen to
remind you that HDM blanked out the screen. When the screen is
blanked out, you can press any key to bring the hidden screen
back.
NOTE: You can blank the screen at any time you choose by
pressing Ctrl-B.
!! To set up your screen blanker:
1. Select "Screen Blanker" from the Global menu (Alt-8).
2. Enter the number of minutes of inactivity before the screen
blanker clears the screen. Entering "00" will keep the screen
blanker from working.
3. You can also enter a message that will be displayed randomly
in different colors when your screen is blanked.
4. If desired, press Ctrl-B to test your screen blanker.
5. Press F2 to save your changes.
page 43
HARD DISK MENU SYSTEM Version 4.60
ADDING YOUR OWN LOGO
You can use your own opening logo screen by starting HDM with
the -H startup switch and the path to your logo file. (More
information about startup switches is found later in this
chapter.) For example:
HDM -HC:\DOS (press Enter)
reads your logo from the HDM.HDR file in the C:\DOS directory.
Your customized header or logo must be named HDM.HDR. If you do
not enter a path to the directory where HDM.HDR is located, then
this file must be in the same directory as the HDM program file.
(See the sample demo file, HDMDEMO.HDR, in your HDM directory.)
The first seven lines of the this file are placed in the top
box of the opening screen (currently the HDM logo). The next
seven lines replace the contents of the box in the lower half
of the opening screen. Each line can be up to 40 characters
long. The HDMDEMO.HDR file contains other format information.
If you use the -N startup switch, the logo/header screen will
be skipped and you will go directly to the first menu screen,
unless you force users to log on.
HOME-MADE HELP
You can create custom help screens for each of the User Menu
entries by creating a plain text (ASCII) file with a name that
uses a combination of the menu entry page letter and entry
number and the menu file number. For example, custom help for
menu entry B5 in menu file HDM.333 would be named "B5.333."
When F1 is pressed while the cursor is on that entry, your
custom help text is displayed first, followed by the normal HDM
help screens. (See the A1DEMO.000 file for more information.)
You can also create a general help screen for each menu file
named HELP.XXX, where "XXX" is the number of the menu file.
For example, help text for menu file HDM.000 would be called
HELP.000. The screen in this file is displayed if an individual
help file does not exist for the menu entry. (see HELPDEMO.000)
The standard HDM Help Screen Pages can be replaced by your own
custom ones. A file named HELPG.HDM would replace Help Page "G"
in the help system. This file would be 51 characters per line and
21 lines long. The first 20 non-space characters would replace
the name of Help Page "G" in the Help Index. (see HELPDEMO.HDM)
page 44
HARD DISK MENU SYSTEM Version 4.60
STARTUP OPTIONS
If the last line of your AUTOEXEC.BAT startup file contains
just "HDM" or if you simply type "HDM" to start HDM, you are
using the basic HDM system. To support some features you want
or to customize HDM upon starting the program, you have two
choices:
* Add extra parameters (or switches) after the HDM command.
* Use DOS environment variables in your AUTOEXEC.BAT file.
Below are command line and DOS environment parameters you can
add to AUTOEXEC.BAT to customize HDM. Don't feel too
overwhelmed, since HDM can operate without any of these
changes. You may just want to use a few of these parameters.
AFTER THE HDM COMMAND
By entering parameters (switches) after "HDM" in your
AUTOEXEC.BAT file, you can customize HDM. Below is a template
for the various commands available:
HDM -switch1 -switch2 ... etc.
where "switch1," "switch2," etc. is a combination of the
switches. When done, your AUTOEXEC.BAT file may look like this:
ECHO OFF
PROMPT $P$G
PATH C:\HDM
CD \HDM
HDM -CC:\BACKUP -EC:\UTIL -GC:\DATA -TC:\DATA -WC:\TEMP
Each parameter you add should be separated by a blank space.
Optional parameters are shown with brackets. When typing these
parameters, omit the brackets.
NOTE: In the following startup switches, "path" must include the
drive letter. For example: C:\DIR\SUBDIR.
Below are the switches from which you can choose:
Switch Purpose
====== ========================================================
-A Automatically runs the selection specified by -Bp#.
-Bp# First menu entry to highlight. (p# is A1 through Z0)
page 45
HARD DISK MENU SYSTEM Version 4.60
-Cpath Location of automatic backup copies of the menu files.
-Ddrive Displays free disk space for the specified drive.
(-DC shows free space on C:)
-Epath Exits to this path when you press F3 to exit to DOS.
-Gpath Specifies the global path to the configuration file
HDM.CFG. This file contains the global settings for
all menu files.
-H[path] Reads header/logo screen from the HDM.HDR file in the
HDM directory or in [path]. [path] is optional.
-I Intensifies the background colors by allowing all
16 colors. The last 8 background colors become bright
versions of the first 8 (for color monitors). This
may not work with some video hardware.
-K Disables key lock status from being displayed and
the stops date and time from being constantly updated.
Used to eliminate video bleed-through on multitasking
systems.
-L[path] Logs usage to the HDM.LOG file in the HDM directory
or in [path]. [path] is optional.
-M### Specifies menu file to be used when HDM is started,
where "###" is any number from 0 through 999.
-N Disables logo screen from being displayed when HDM
is started. If a user logon is required, HDM goes
directly to the logon window.
-O Turns off the NumLock key when HDM starts.
-Q Queues keystrokes in the DOS keyboard buffer when
HDM starts or after returning from running a program.
Normally, HDM clears any keystrokes so its operation
is not affected.
-S Sets screen border on color monitors. The border will
match the background color of the Status Bar. This
may not work well with some EGA video cards.
-Tpath Specifies the location of the HDM menu files.
(HDM.000 to HDM.999, see -0 to -9 also)
page 46
HARD DISK MENU SYSTEM Version 4.60
-Uname Reads a user ID from the named DOS environment
variable to automate the user logon procedure.
-VF Sets fast screen output for snow-less video boards.
This parameter prevents HDM from waiting for your
video card. This is the default except with CGA video
systems.
-VM Sets video mode to monochrome (black and white). Use
this parameter to correct the problem of unreadable
screens on laptops, portables and similar computers.
-VS Stops static (snow) from displaying on the screen by
waiting for your video card to draw the screen. This
is the default for CGA computers.
-Wpath Specifies work path where the temporary work file is
stored. This work path must be in the DOS path
statement in AUTOEXEC.BAT.
-#path Similar to -T except this parameter specifies the path
to each group of 100 menu files. -# is a number from
-0 to -9. (-7 is for HDM.700-799).
DOS ENVIRONMENT VARIABLES
Instead of typing switches after "HDM," you can use a DOS
environment variable to customize the program. This SET command
must be in the AUTOEXEC.BAT file before starting HDM.
Below is a template for the various commands available:
SET HDM=-variable1 -variable2 ... etc.
where "variable1," "variable2," etc., is any of the switches
mentioned in the previous section.
NOTE: Do not use spaces on either side of the equal sign.
For example, your AUTOEXEC.BAT file may look like this:
PATH C:\;C:\DOS;C:\UTILS;D:\RAMDISK
SET HDM=-A -BF5 -Cc:\bkup -Ec:\dir -H -I -Wd:\ramdisk
CD\HDM
HDM
page 47
HARD DISK MENU SYSTEM Version 4.60
OTHER ENVIRONMENT VARIABLES
There are other environment variables you can use to customize
HDM.
* SET X= - Allows the use of another name instead of X.BAT (DOS
3.0 or above). You can rename the temporary batch file called
X.BAT to another name (up to 8 characters). You will then have
to type this new name to return to HDM after exiting to DOS.
EXAMPLE: In this example, the temporary work file will now be
named RETURN.BAT. You would then type "RETURN" instead of "X"
to return to HDM from DOS:
SET X=RETURN
CD \HDM
HDM
WARNING: For the righthand side of "SET X=," don't use any DOS
commands like "EXIT," "CALL," "RESTORE" or names already used,
such as "HDM," "HDM4" or other program names you use.
* SET name= - This command is used in conjunction with the -U
startup switch. The variable to the left of the equal sign
(name) must be the same environment variable referred to by
the -U switch. This DOS environment variable will tell HDM to
automatically log on the User ID specified to the right of the
equal sign.
EXAMPLE: In this example, HDM will not wait for the user to
enter an ID at the logon window:
SET HDMUSER=LAURA
CD \HDM
HDM -UHDMUSER -N
"Laura" will automatically be entered by HDM. By also using the
-N switch and not having a logon password for this user ID, HDM
will go directly to the User Menu screen with "Laura" already
logged on. For this automatic logon to work, "Laura" must be an
entry in the User ID Security Table.
page 48
HARD DISK MENU SYSTEM Version 4.60
USING FUNCTIONS
HDM offers many powerful functions. Knowing how to use them and
when will help you get the most from the program.
NOTE: Remember that functions simply are replaced by their
contents in a menu action. For example, if you are using the
{FILE} function, which lets you select a specific file name,
the chosen path and file name are substituted for that function.
USING TILDE (~) AND BRACES ({ }) IN MENU ACTIONS
Because the braces ({ }) are used to identify HDM menu
functions and the tilde (~) is used to separate commands (the
equivalent to the Enter key), they cannot be entered in the
menu action as normal characters. If you need to use any of
these characters for other purposes, use these substitutes:
To use: Instead use:
======= ============
{ Ctrl-Q
} Ctrl-P
~ Ctrl-Z
These special characters will be converted to the correct
characters before DOS runs the programs that use them.
ORDER OF EVALUATION
Menu functions are generally handled from left to right in the
menu action, but functions can be nested. Just like in math,
functions in the inner braces are evaluated before functions in
the outer braces.
EXAMPLE: If macro #1 (&1) contains "COPY" and macro #2 (&2)
contains "DELETE" and the entered filename is "MYFILE.TXT" then:
{&1 {?Enter file name} C:\SAVE} %1 %2~&2 %1~dir %2~
becomes:
COPY MYFILE.TXT C:\SAVE~DELETE MYFILE.TXT~DIR C:\SAVE~
In the previous example, note that the file name MYFILE.TXT
becomes the first parameter (%1) and that c:\save becomes the
second parameter (%2).
EXAMPLE: Note that the following two menu actions do the same
page 49
HARD DISK MENU SYSTEM Version 4.60
thing, they take you to the DOS directory.
{default C}{?Enter drive}:~CD\{default DOS}{?Enter directory}~{exit}
{?Enter drive{default C}}:~CD\{?Enter directory{default DOS}}~{exit}
The defaults in the inner braces are evaluated first. When the
user is prompted for the drive, a "C" is in the input field.
When the user is prompted for a directory, "DOS" is in the
input field. The user can accept the defaults or enter
something else. HDM then exits to that drive and directory and
displays the DOS prompt. When you want to return to HDM, press
X and press Enter.
NOTE: If the name of X.BAT was changed by using the "SET X="
environment variable, then use the new name instead of X to
return to HDM.
FUNCTION REFERENCE
Below is an alphabetical listing of functions available through
HDM. Each function is listed with its general purpose, format for
use, details and examples.
================================================================
&#, {&#} or {&# parameter1 parameter2 ... parameter9}
FORMAT: {&1 THIS IS A TEST}
OVERVIEW: Replaced by the contents of a macro (&0 through &9)
and fills up to nine parameters in the parameter symbols %1
through %9. Each menu file allows up to 10 macros. The macro
can contain a combination of program names, DOS commands and
other HDM functions.
DETAILS: This function replaces the macro name (&#) with the
contents of that macro in the menu action where it is called.
Macros are created from the Local menu from the Top Menu.
The maximum number of parameters is nine, separated by spaces.
If there are any parameters present, they are put in parameter
symbols %1 through %9 and can be used anywhere in the macro
itself or the menu action where the macro is used. If the macro
has no parameters, then the braces around it aren't required.
However, the braces affect when a macro is evaluated.
Since a space is used to separate the parameters, any phrase
that is used will have each word in a separate parameter.
page 50
HARD DISK MENU SYSTEM Version 4.60
EXAMPLE: To create a macro that copies files to a disk in drive
A, you first would define the macro under the Local menu. For
example, you could define macro #8 as:
COPY *.* A:~PAUSE~
Your menu action to use this macro would then be:
C:~CD \123~&8CD \DBASE~&8CD\MM~&8
Each &8 is replaced by the macro's contents. What HDM runs is
then:
C:
CD \123
COPY *.* A:
PAUSE
CD \DBASE
COPY *.* A:
PAUSE
CD \MM
COPY *.* A:
PAUSE
ALSO SEE: %# for more information on parameters.
================================================================
%# or {%#}
FORMAT: %1 or {%1}
OVERVIEW: Used with an HDM macro to give your program, batch
file, DOS command or other macros more information when used,
such as the name of a file to immediately load. This is
replaced by the contents of parameters %1 through %9.
DETAILS: This function is used with macros to provide more
information to the macro. Whatever follows your use of a macro
is placed in the macro's parameters %1 through %9. Items
separated by spaces are placed sequentially in the next
parameter: %1, %2, ... %9. Once placed in the parameter, the
contents can be used in the rest of menu action, the current
macro or in another macro.
EXAMPLE: Imagine your macro &5 is:
COPY C:\NEW\%1 C:\OLD\%1
page 51
HARD DISK MENU SYSTEM Version 4.60
And you create a menu entry with the menu action:
{&5 {?Enter file to move:}}~DEL C:\NEW\%1~DIR C:\OLD\%1~PAUSE~
When this menu entry is run, HDM will ask:
Enter file to move:
If you type, BUDGET90.WKS, this file becomes the contents of
the first parameter (%1). The menu action that is executed is:
COPY C:\NEW\BUDGET90.WKS C:\OLD\BUDGET90.WKS
DEL C:\NEW\BUDGET90.WKS
DIR C:\OLD\BUDGET90.WKS
PAUSE
Note that the prompt function ({?Enter file to move}) is
executed first because it is in the inner braces. The prompt is
replaced by the file name BUDGET90.WKS which is then placed in
%1 because it is the first (and only) parameter of macro &5.
The {&5} is then replaced by the contents of the &5 macro. Each
%1 in the menu action is replaced by BUDGET90.WKS, including
the two that came from the macro and the two that were already
in the action line. The file BUDGET90.WKS is moved from C:\NEW
to C:\OLD and is displayed in the C:\OLD directory.
By putting braces around the macro parameter {%#}, the
parameter can be evaluated sooner, if needed.
EXAMPLE: For example, the %1 parameter can be used in an
immediate run function like the following:
{&5 {?Enter file to move}}~{RUN! DIR C:\NEW\{%1}}~DEL C:\NEW\%1~
If the {%1} in the {RUN!} function didn't have the braces
around it, the {RUN!} function would be executed before the
parameter {%1} was replaced. DOS would try to run the command:
DIR C:\NEW\%1
but would give you an error message. By putting the braces
around the %1, it is evaluated before the {RUN!} is executed.
DOS then properly runs:
DIR C:\NEW\BUDGET90.WKS
page 52
HARD DISK MENU SYSTEM Version 4.60
================================================================
%0 or {%0}
OVERVIEW: Used to contain the results of certain menu functions.
DETAILS: %0 is a special purpose parameter used with the
functions {?}, {?prompt}, {DIR}, {FILE}, {SELECT} and {VSELECT}.
After executing one of these functions, %0 contains the input
(or default) data.
ALSO SEE: {?}, {?prompt}, {DIR}, {FILE}, {SELECT} or {VSELECT}
for more details.
================================================================
~ (Tilde)
OVERVIEW: Used to separate programs and DOS commands. It is
replaced by the carriage return/line feed (CR/LF) characters
when the menu entry is run.
DETAILS: The tilde character is used in a menu action to
represent pressing the Enter key. Just as you use the Enter key
to end lines in a batch file or to run a program after you type
its name, you use the tilde to end or separate commands in a
menu action.
EXAMPLE: The menu action
A:~COPY LIST.* B:~COPY EPSON.EXE B:~CHKDSK B:~PAUSE~
becomes
A:
COPY LIST.* B:
COPY EPSON.EXE B:
CHKDSK B:
PAUSE
If you need to use the actual tilde (~) in your program or
command but not for its intended use with HDM, use Ctrl-Z.
Pressing Ctrl-Z displays a double tilde, which is converted to
a single tilde when the menu action is run by DOS.
================================================================
! (Exclamation Point)
OVERVIEW: When a menu entry is run, HDM normally leaves memory
and lets DOS run the menu action. If an exclamation point (!)
page 53
HARD DISK MENU SYSTEM Version 4.60
is used in the first position of the menu action, the menu
action will run while HDM stays in memory (memory resident).
Use this function for programs that require little memory.
DETAILS: The exclamation point (!) used in the first position
of a menu action will cause HDM to run the menu action while
staying in memory. One advantage of this is that the menu
action executes faster because HDM will not have to spend time
to leave memory or to reload when the menu action is completed.
There are some limitations to using the exclamation point.
First, only smaller programs that will fit into memory
alongside HDM can run. Second, you cannot start a
memory-resident program (TSR) this way. In these cases, create
your menu action without the exclamation point.
EXAMPLE: You can use the exclamation point with simple programs:
!C:~CD\NORTON~NORTON~
================================================================
|| (Double Vertical Line)
OVERVIEW: Divides a menu action into segments that will run
independent of one another. The segment after the double
vertical line will start when the segment before the double
vertical line has completely finished.
DETAILS: Two vertical lines in a menu action cause HDM to run
the menu action up to that point as if that were the end of the
action. HDM then returns to resume the menu action. You can use
as many double lines as needed in one menu action.
One good use of the double vertical line is to go to another
menu file or to run another menu entry. To put the double
vertical line in your menu action, hold down the shift key and
press the \ (backslash) key twice.
EXAMPLE: The double vertical lines can ensure that one function
is not run before another. Imagine your menu action is:
C:~CD\QUICKEN~Q~||{CONFIRM Backup?}COPY C:\QUICKEN A:~
After running Quicken, HDM asks you if you want to back up your
Quicken personal finance files. If you answer YES, the files
are copied to diskette. If the answer is NO, then you are
returned to HDM.
page 54
HARD DISK MENU SYSTEM Version 4.60
For network users, the double vertical lines can be used like
this:
C:~CD\NETWORK~LOGIN~||{MENU 400}
Because the MENU function is within braces, it would normally
be run first. In this case, menu file 400 would not be found
because HDM.400 is on the network server, unavailable until you
have logged onto the server with LOGIN. The double lines ensure
that the LOGIN is done before HDM switches to menu number 400.
EXAMPLE: The double vertical line can help you run more
programs from one menu action. Imagine your menu action is:
C:~CD \DIR1~PROG1~ ... ~CD \DIR9~PROG9~||{KEY R 5}
In this case, you want to run 20 programs from different
directories, but there wasn't enough room in one menu action to
contain them all. The solution was to continue executing the
programs from menu entry R5 ({KEY R 5}), which had programs 10
through 20 in it. Without the double vertical lines, the
keystrokes typed by the {KEY} function would have been
squandered in the current menu action (the first nine programs
that were run).
================================================================
@@batch-file
FORMAT: @@TEST (to run TEST.BAT or TEST.BTM)
OVERVIEW: Used to run a batch file (.BAT) or a 4DOS/NDOS batch
to memory file (.BTM) and then return to HDM.
DETAILS: This menu function allows you to execute a batch file
from a menu action. @@ is not needed to run .COM or .EXE files.
Prior to running the menu action, @@ is replaced by:
DOS Version Command Processor
=========== =================
before 3.0 COMMAND.COM
3.0 - 3.2 COMSPEC Variable
after 3.2 CALL
This causes the batch file to be executed by a second copy of
DOS's command processor or by the DOS CALL command. The CALL
command is more efficient and will be used automatically if you
are running DOS 3.30 or greater.
page 55
HARD DISK MENU SYSTEM Version 4.60
Without the @@, the batch file is run by the current command
processor, returning you to the DOS prompt instead of the menu.
Why? Menu actions are run as temporary batch files. When a
second batch file is run, DOS does not return control to the
first one.
NOTE: If you are returned to DOS, just press the X key and
press Enter. You'll be returned to HDM.
EXAMPLE: DW5.BAT is a batch-file to load the word processor
DisplayWrite 5. The menu action is:
C:~CD\DSPLYWR5~DW5~
When the program is finished, you are exited to DOS, not the
HDM program. This may be inconvenient, such as:
C:\> _
You can avoid being "kicked out" to DOS if you change your menu
action to this:
C:~CD\DSPLYWR5~@@DW5~
When the DW5 batch file finishes, you return to the same entry
in HDM menu.
If you are using DOS 3.30 or greater, HDM automatically uses
the DOS CALL command instead of COMMAND /C. By using CALL, you
avoid loading a second command processor, saving memory and
time. The Auto-Build feature (F4) automatically puts @@ in
front of batch files. HDM recognizes the version of DOS you are
using. With DOS 3.30 or greater, HDM replaces @@ with CALL so
that @@DW5 becomes CALL DW5.
================================================================
{?}, {??}, {?prompt} or {??prompt}
FORMAT: {?Type the file you want to copy}
OVERVIEW: Displays a prompt message and waits for your answer.
The answer replaces this function and is put in the parameter
%0.
DETAILS: This function halts the execution of the action until
the Enter or Esc keys are pressed. During the pause, you can
enter up to 128 characters. These characters are remembered as
parameter %0 and can be used in the rest of the menu action.
page 56
HARD DISK MENU SYSTEM Version 4.60
Press Enter to continue the rest of the menu action. Press Esc
to cancel the menu action from continuing. You'll then be
returned to your menu.
When used, the prompt message is displayed in a window. Your
answer to the prompt is placed inside the window, just below
the prompt. If no prompt is supplied, HDM uses "Pause for input
...".
EXAMPLE: Here is a simple but common use of the prompt
function. Imagine you are creating a menu action that copies
files from a directory to a diskette, such as:
COPY C:\{?Enter the directory to copy to diskette:}\*.* A:~
When run, you will be asked:
Enter the directory to copy to diskette:
If you enter "LOTUS\FILES" and press Enter, then the menu
action will run like this:
COPY C:\LOTUS\FILES\*.* A: (press Enter)
All files in the C:\LOTUS\FILES directory are copied to the
diskette in the A: drive. You are then returned to your menu.
If you use two question marks (instead of one), the answer you
type to the prompt will be hidden from view. The {??prompt}
function is useful for passwords.
If you need to use the answer to a {?prompt} in more than one
place in the same menu action, use %0 where you need it.
EXAMPLE: Here is an example of using the answer to a prompt,
which is in the parameter %0, in more than one place. Assume
you have a menu action such as:
COPY C:\{?Enter the directory to move to A}\*.* A:~DEL C:\%0\*.*~
Even though the prompt is answered only once in the beginning,
your menu action will translate into this:
COPY C:\LOTUS\FILES\*.* A:
DEL C:\LOTUS\FILES\*.*
page 57
HARD DISK MENU SYSTEM Version 4.60
================================================================
{%environment variable%}
FORMAT: {%PATH%}
OVERVIEW: Used to retrieve the contents of the DOS environment
variable of the same name.
DETAILS: This function retrieves the contents of the DOS
environment variable of the same name. If there is no matching
variable, the function is removed from the menu action.
This function also works in the title lines at the top of your
menu. For example, HDM lists your path in the title of your
menu. These lines are set up using "Top Box Titles" from the
Local menu.
EXAMPLE: This function can be helpful for network users. Assume
your menu action is:
C:~CD\NET~LOGIN {%NETUSER%}~
If the DOS environment variable NETUSER is "BOB," then the
above menu action becomes:
C:~CD\NET~LOGIN BOB~
EXAMPLE: In titles, you can use the following to customize the
top of your menus. (Change your titles by selecting "Top Box
Titles" from the Local menu.)
* {%COMSPEC%} - Your command processor
* {%PATH%} - Your DOS path
================================================================
{BEEP}
OVERVIEW: Causes a short beep from your computer's speaker.
DETAILS: This menu function causes the speaker to sound a short
beep. It doesn't beep while you're in HDM. Rather, it is
converted to a Ctrl-G so DOS will beep when it sees that
character in the temporary batch file (X.BAT). This can be used
to alert you that a task is completed.
EXAMPLE: Imagine you want to create a menu action that beeps
when the menu action is finished. The beep is useful when you
page 58
HARD DISK MENU SYSTEM Version 4.60
are running menu actions that require large amounts of time but
not your presence. For example:
C:~CD\CLIPPER~CLIPPER BIGPROG~TLINK BIGPROG~{BEEP}~
When done, the speaker will beep.
================================================================
{BEEP!}
OVERVIEW: Immediately sounds a beep before going to DOS.
DETAILS: This is the beep immediate function. It sounds an
alert in HDM as soon as it is run. It is useful in alerting a
user to an upcoming {?prompt} or {SELECT/VSELECT} function.
EXAMPLE: Imagine your menu action is:
C:~CD\CLIPPER~{BEEP!}CLIPPER {?Enter program}~TLINK %0~{BEEP}
HDM will beep before you are asked to enter the program's name.
================================================================
{CK drive-letter}
FORMAT: {CK A}
OVERVIEW: Checks if the disk drive is ready. If not, a message
is displayed and action is canceled.
DETAILS: This function ensures that a disk drive is ready
before continuing. If the drive isn't ready, an error message
is displayed and the menu action is canceled. This prevents you
from getting a "Drive not ready" error from DOS.
EXAMPLE: Let's assume you want to ensure drive A has a diskette
in it before you copy files to it. Your menu action could look
like this:
{CK A}COPY C:\MM\*.DOC A:~
If there is a diskette in drive A, then all the files with a
.DOC extension in the C:\MM directory will be copied to the
diskette in drive A. If the drive isn't ready, HDM will warn
you. The rest of the menu action will be canceled.
page 59
HARD DISK MENU SYSTEM Version 4.60
================================================================
{COLOR foreground background}
FORMAT: {COLOR 7 0}
OVERVIEW: Sets foreground and background colors for the current
menu entry's DOS screen.
DETAILS: This menu function sets the foreground and background
colors of the DOS screen for the menu action that contains the
{COLOR} function. Foreground and background colors are numbered
from 0 to 15. These are the available colors:
Color Number
============= ======
Black 0
Blue 1
Green 2
Cyan 3
Red 4
Magenta 5
Brown 6
Light gray 7
Dark gray 8
Light blue 9
Light green 10
Light cyan 11
Light red 12
Light magenta 13
Yellow 14
White 15
EXAMPLE: This menu action displays the files of C:\DIR in white
on a blue background:
{COLOR 15 1}DIR C:\DIR/P~
NOTE: The {COLOR} function doesn't work if the ANSI.SYS device
driver is loaded in your CONFIG.SYS file because ANSI.SYS
overrides any colors you set with its own. Also, background
colors eight through fifteen are the same as zero through seven
unless HDM's -I startup switch is used to enable high-intensity
background colors. See the chapter "Customizing HDM" for more
information on startup switches.
page 60
HARD DISK MENU SYSTEM Version 4.60
=================================================================
{CONFIRM}, {CONFIRM prompt} or {CONFIRM prompt~seconds~Y/N}
FORMAT: {CONFIRM Backup now~60~N}
OVERVIEW: Displays prompt message, and waits a certain number of
seconds (if entered) for you to choose "Y" (yes) to continue or
"N" (no) to cancel the menu action.
DETAILS: This menu function pops up a window with your prompt
message. If you don't supply a prompt message, it will ask "Are
you sure?". A time delay can be added so that the function
continues with a default choice, such as "N". The range for
seconds is from zero to 9999. If the number of seconds is not
included or is equal to zero, the function will wait until a
yes/no answer is entered.
You can press Enter or "Y" for yes to continue the rest of the
menu action. If you press Esc or "N", the menu action is
canceled. If you use a mouse, click on "Yes" or "No" at the
bottom of the confirm window.
================================================================
{CURSOR start-line end-line}
FORMAT: {CURSOR 0 7}
OVERVIEW: Sets the shape of the cursor when you exit to DOS or
for the program that will be run.
DETAILS: This menu function sets the shape of the cursor when
you leave HDM to run any program, DOS command, or batch file,
or if you exit to the DOS prompt.
The start- and end-lines are the top and bottom scan lines of
the cursor. The range is different for each type of monitor
used:
* Monochrome monitors 0 to 13
* CGA, EGA, VGA, etc. 0 to 7
Check your display adapter's manual for the number of scan
lines you can use.
EXAMPLE: This menu action sets a block cursor when exiting HDM
on a color monitor:
{CURSOR 0 7}{EXIT}
page 61
HARD DISK MENU SYSTEM Version 4.60
================================================================
{DEFAULT reply-to-prompt}
FORMAT: {DEFAULT C:\DOS}
OVERVIEW: Default reply to the {?} or {?prompt} functions that
you can change.
DETAILS: This menu function allows you to display a suggested
reply (up to 128 characters long) to the {?prompt} function. The
user can accept it by pressing the Enter key, modify it before
accepting it or type a completely different reply. The {DEFAULT}
function must either precede the {?} function or be contained
inside the {?} function, such as:
{?Enter a file name{DEFAULT C:\DB4\CUSTOMER.DBF}}
EXAMPLE: The prompt below asks for a directory to copy files
from to a disk in drive A. The menu action is:
{DEFAULT LOTUS\WK2}COPY C:\{?Enter the directory to copy:}\*.* A:
When this menu entry is run, you are asked:
Enter the directory to copy:
In the input (answer) field of the same window, the directory
LOTUS\WK2 is already listed, thanks to the {DEFAULT} function.
If you press Enter, this default answer will be used. The menu
action then run is:
COPY C:\LOTUS\WK2\*.* A:
EXAMPLE: This function can also be used with blank macros to
provide the answer in several places. Consider this menu
action, which uses a blank macro #5 (&5):
C:~CD\ASM~{&5 {{DEFAULT MYFILE}?Enter file:}}MASM %1~LINK %1~
When run, you are asked:
Enter file:
The default answer is MYFILE, but if you type "DEMO31" and
press Enter, the menu action executed is:
C:~CD\ASM~MASM DEMO31~LINK DEMO31~
page 62
HARD DISK MENU SYSTEM Version 4.60
The &5 macro is replaced by an empty string since it contains
nothing. Its first parameter (%1), which is the prompt function
and its default answer, is replaced by the "DEMO31."
Since %0 always contains the result of the {?prompt} function,
you could avoid using a blank macro and write a simpler menu
action, such as:
C:~CD\ASM~MASM {{DEFAULT MYFILE}?Enter file}~LINK %0~
================================================================
{DELAY #}
FORMAT: {DELAY 5}
OVERVIEW: Pauses for a number of seconds before continuing with
the rest of the menu action. Press Enter to bypass the delay.
DETAILS: This function allows you to add a built-in pause in a
menu action. One possible use is to add a pause before using
the {REBOOT} function. The pause may be needed so that your
disk caching software can write to disk. Without a delay, some
of your data may be lost.
EXAMPLE: Let's assume you are using disk caching software (like
Microsoft's SmartDrive) and have enabled delayed writes. The
default time before writing to disk is one second. To ensure
your data is safe before rebooting your computer, your menu
action could look like this:
COPY C:\CONFIG.NEW C:\CONFIG.SYS~||{DELAY 2}{REBOOT}
NOTE: The double vertical lines (||) are used to force the
{DELAY} function to wait for the first part of the menu action
to run before it delays. Without the double vertical lines, the
{DELAY} function would have run first because menu functions
are run before other parts of the menu action.
================================================================
{DIAL [modem-cmd1~...modem-cmd15~] phone-number}
FORMAT: {DIAL S11=30~9,1 (999) 555-1212}
OVERVIEW: Dials a phone number using a Hayes-compatible modem
and can also send a setup string to the modem.
DETAILS: To use this function you need two items:
page 63
HARD DISK MENU SYSTEM Version 4.60
* A modem that can dial a phone number using the Hayes ATD
command.
* A telephone connected to your modem or on the same phone line.
If you have a Hayes-compatible modem, this function allows you
to automatically dial phone numbers from a menu entry. For
example, one complete menu file could be dedicated to a phone
directory, each page representing a different company, and each
selection on a given page being a person in the company that
you call.
EXAMPLE: If menu file 50 were a phone directory, use the {MENU
50} function to display the directory. If page B is Software
Companies, and entry 5 is Borland International, then its menu
action would be:
{DIAL 1(800) 255-8008}
To call Borland, you would press "B" and then "5."
Once the dialing is done, a message on the screen tells you to
pick up the phone and press a key. This disconnects the modem
so you can talk. Press the Esc key or use the {RETURN} function
to go back to the Menu File that called your phone directory
menu file. Dialing is logged if HDM was started with -L.
The {DIAL} function can send modem set-up commands to
initialize the modem, turn off auto-answer, turn on the
speaker, etc. These commands are optional and are not needed to
dial a phone number. You can have up to 15 of these commands,
each of which must end with a tilde (~). If you only want to
change a setting in the modem, you can use this function to
send modem commands but do not include a phone number. Consult
your modem manual for the list of commands available.
NOTE: Do not end the phone number with a tilde because HDM will
mistake it for a modem command and not dial. Also, do not start
the commands with an "AT" or end them with a carriage return.
HDM does this automatically.
You can use a maximum of 36 characters in the phone number and
64 in the entire {DIAL} function. Use the Global menu to change
the communications port, interrupt number and the dial type.
EXAMPLE: To create a phone entry that automatically dials 9 to
get an outside line, use this menu action:
page 64
HARD DISK MENU SYSTEM Version 4.60
{DIAL 9,1 (999) 555-1212}
EXAMPLE: To use fast tone dialing when dialing a phone number,
use this menu action with a modem command:
{DIAL S11=30~9,1 (999) 555-1212}
EXAMPLE: To turn off your modem's speaker and auto-answering
but do not dial a phone number, use this menu action:
{DIAL M0~S0=0~}
================================================================
{DIR}, {DIR!}, {DIR title~path\mask} or {DIR! title~path\mask}
FORMAT: {DIR! C:\T*}, {DIR Select Dir~}, {DIR Select Dir~C:\T*}
OVERVIEW: Displays a list of drive and directory choices from
which you can choose.
DETAILS: This function opens a window that displays a list of
drives or directories on the right side, depending if you used
a path in the function (such as DIR title~C:\dir) or not.
The number of drives or directories matching your path and mask
are displayed on the left side of the window. You can switch to
other directories by pressing Enter on your choice. If you
choose "Use this DIR", then the current directory is chosen.
If you choose "Root", you will be shown the root, or top,
directory of the current drive. If you choose "Parent", you
will be shown the directory above the current one you are in.
To change drives, press F4 to display the disk drive list. If
you press Esc, the menu action will be canceled.
To speed searching, you can jump to a specific directory by
pressing the first letter with which it begins. By pressing the
letter repeatedly, the cursor highlights the next directory
that starts with that letter and then starts at the top again.
When you finally choose a directory using F2 or picking "Use
this DIR", that directory replaces the {DIR} function and is
placed in the %0 parameter for use elsewhere in your menu
action.
{DIR!} and {DIR! title~path\mask} are the same as {DIR}, but
limits your access to a specified drive and directory and
subdirectories. The optional mask restricts your choices to
specific directories. The default mask is *.* (everything).
page 65
HARD DISK MENU SYSTEM Version 4.60
If you use {DIR} without a path, it will display a list of
drives. If you specify a path, that directory will be the first
one displayed. If you specify a mask, only directories that
match it are displayed. If you use the exclamation point in
the function ({DIR!}), you cannot switch to a directory higher
than the one specified in the path, and you cannot switch to
another disk drive.
If you use the optional 64-character title, it must end with a ~
(tilde) and it must precede the specified path or mask (if any).
EXAMPLE: To copy all files in one directory to another, your
menu action would be:
COPY {DIR From:~C:\}\*.* {DIR To:~A:\}
In the above example, each use of {DIR} opens a window with a
"From:" or "To:" title and a list of directories. Press Enter
to view different directories. Press F2 to select a directory.
If you pick the UTILITY directory on drive C for the "From:"
directory and the root directory of drive A for the "To:"
directory, the above menu action turns into:
COPY C:\UTILITY\*.* A:\
EXAMPLE: To go to the DOS prompt in the directory of your
choice, your menu action would be:
{SELECT Disk Drive~A:~B:~C:~D:~}~CD {DIR! {%0}\}{EXIT}
When you pick drive C from the {SELECT} menu, the {SELECT}
function is replaced by "C:". Because it is inside the
innermost braces, {%0} is replaced by "C:" before the
{DIR!} function is run. The menu action becomes:
C:~CD {DIR! C:\}{EXIT}
The {DIR!} function limits you to the root directory and all
subdirectories of C: so you can't pick a different disk drive.
If you next choose the DOS directory, the menu action becomes:
C:~CD C:\DOS{EXIT}
When this runs, it switches to drive C, if you're not already
there. Then it changes to the DOS directory and HDM exits to
the DOS prompt.
page 66
HARD DISK MENU SYSTEM Version 4.60
================================================================
{EXIT} or {QUIT}
OVERVIEW: Exits you to the DOS prompt (like F3), but allows you
to first change to a different directory.
DETAILS: This function works the same as the "Exit HDM" command
in the Exit menu or using the F3 key. One added benefit is that
you can change to a different drive and directory before you
exit to the DOS prompt. When you're finished in DOS, type "X"
and press Enter to return to HDM.
The {QUIT} function bypasses all security, whereas {EXIT}
honors the security levels when exiting HDM. These security
levels include the security specified in the Security menu and
the individual security level specified on the "Exit HDM"
command.
To change the individual security level, press Alt-F1 while the
cursor is on the "Exit HDM" command in the Exit menu. If your
user security level is lower than the security of this menu
choice, HDM will ask for the security level password before
allowing you to exit.
EXAMPLE: In this example, you would see a directory listing of
all files ending with .DOC. Next, you're presented with a DOS
prompt where you can do some other work. To return to HDM,
press X at the DOS prompt and the Enter key.
C:~CD\MM~DIR *.DOC~{EXIT}~
EXAMPLE: The following is an example of a menu action that logs
you off a Novell network when HDM resides on a network drive:
H:~CD\NETWORK~{KEY L O G O U T ENTR}{QUIT}
This menu action exits HDM and automatically enters "LOGOUT" at
the DOS prompt. This way, you avoid receiving an error message
from DOS when X.BAT cannot be found after being logged off the
network drive.
================================================================
{FILE}, {FILE!}, {FILE path\mask} or {FILE! title~path\mask}
FORMAT: {FILE *.BAK}, {FILE Pick File~}, {FILE Pick File~*.BAK}
OVERVIEW: Displays a list of drives, directories and files from
which you can choose.
page 67
HARD DISK MENU SYSTEM Version 4.60
DETAILS: The {FILE} function and its variations displays a list
of drives, directories and/or files on the right side of the
screen, depending if you included a path name in the function
(such as FILE title~C:\Windows\*.ini).
The number of drives, directories and files matching your path
and/or mask are displayed on the left side of the screen. You
can switch to other directories by pressing Enter on a directory
name. If you choose "Root", you will be shown the root, or top,
directory of the current drive. If you choose "Parent", you will
be shown the directory above the current one. To change drives,
press F4. If you press Esc, you will cancel the menu action.
To speed searching, you can jump to a specific directory or
file name by pressing the first letter with which it begins. By
pressing the letter repeatedly, the cursor highlights the next
directory or file that starts with that letter and then starts
at the top again.
When you choose a file by pressing Enter, the complete path and
file name replaces the {FILE} function and is placed in the %0
parameter for use elsewhere in your menu action.
{FILE!} and {FILE! title~path\mask} are the same as {FILE},
but limits your access to a specified drive, directory and
subdirectories. The optional mask restricts your choices to
specific files. The default mask is *.* (everything). You can
add a 64-character description by prefacing the path\mask with
a title. The title must end with a ~ (tilde).
EXAMPLE: This menu action shows files in C:\DOCS ending with
*.TXT plus the phrase "Your Title" at the top of the window.
{FILE Your Title~C:\DOCS\*.TXT}
If you use {FILE} without a path, it will display a list of disk
drives. If you specify a path, the files in that directory are
displayed. If you specify a mask, only files that match it are
displayed. If you use the exclamation point in the function
({FILE!}), you cannot switch to a directory higher than the one
specified in the path, and you cannot switch to another drive.
EXAMPLE: This menu action lets you edit any file that ends with
the extension ".BAT". You pick the file from any drive/directory.
C:~CD\DOS~EDIT {FILE Edit a Batch File~*.BAT}
EXAMPLE: This menu action displays the help screens from text
page 68
HARD DISK MENU SYSTEM Version 4.60
files. This lets the user pick from a list of files ending in
".TXT" from the D:\HELPTEXT directory or any directories below
it. It does not let the user change drives or go to the
directories above D:\HELPTEXT.
D:~CD\HELPTEXT~MORE < {FILE! D:\HELPTEXT\*.TXT}
EXAMPLE: This menu action copies any file from diskette drive A
or B to C:\TEST by first choosing a disk drive, then a
directory from that disk, then a file from that directory.
COPY {FILE! {DIR! {SELECT Disk~A:~B:}\}} C:\TEST
================================================================
{GETPROJECT}
OVERVIEW: Asks for new project name that will be recorded in
the usage log and used by the {PROJECT} function.
DETAILS: This function is the same as choosing "Change Project"
from the Global menu. It shows the current project name and
allows you to change it. The change, which takes place
immediately, is used by the {PROJECT} function and is written
to the usage log.
================================================================
{KEY k1 k2 ... k15}
FORMAT: {KEY X C O P Y * . * ENTR}
OVERVIEW: Passes up to 15 keys to a program that uses the
standard DOS keyboard buffer.
DETAILS: This function allows you to automate some procedures
in the programs that you start from HDM. You can pass any
keystroke on the IBM keyboard plus the key combinations listed
below to your program or DOS. Each keystroke and key
combination must be separated by a space.
The following chart shows what codes to use for various
keystrokes.
Keystrokes Code Keystrokes Code Keystrokes Code
========== ==== ========== ==== ========== ====
Ctrl-A CA Ctrl-B CB Ctrl-C CC
Ctrl-D CD Ctrl-E CE Ctrl-F CF
Ctrl-G CG Ctrl-H CH Ctrl-I CI
page 69
HARD DISK MENU SYSTEM Version 4.60
Keystrokes Code Keystrokes Code Keystrokes Code
========== ==== ========== ==== ========== ====
Ctrl-J CJ Ctrl-K CK Ctrl-L CL
Ctrl-M CM Ctrl-N CN Ctrl-O CO
Ctrl-P CP Ctrl-Q CQ Ctrl-R CR
Ctrl-S CS Ctrl-T CT Ctrl-U CU
Ctrl-V CV Ctrl-W CW Ctrl-X CX
Ctrl-Y CY Ctrl-Z CZ Space SP
Ctrl-[ C[ Ctrl-] C] Ctrl-\ C\
Ctrl-2 C2 Ctrl-6 C6 Ctrl-- C-
Enter ENTR Escape ESC Ctrl-Break CBRK
Backspace BSP Ctrl-BkSpc CBSP Tab TAB
Shift-Tab STAB Alt-A AA Alt-B AB
Alt-C AC Alt-D AD Alt-E AE
Alt-F AF Alt-G AG Alt-H AH
Alt-I AI Alt-J AJ Alt-K AK
Alt-L AL Alt-M AM Alt-N AN
Alt-O AO Alt-P AP Alt-Q AQ
Alt-R AR Alt-S AS Alt-T AT
Alt-U AU Alt-V AV Alt-W AW
Alt-X AX Alt-Y AY Alt-Z AZ
F1 F1 F2 F2 F3 F3
F4 F4 F5 F5 F6 F6
F7 F7 F8 F8 F9 F9
F10 F10 F11 F11 F12 F12
Alt-F1 AF1 Alt-F2 AF2 Alt-F3 AF3
Alt-F4 AF4 Alt-F5 AF5 Alt-F6 AF6
Alt-F7 AF7 Alt-F8 AF8 Alt-F9 AF9
Alt-F10 AF10 Alt-F11 AF11 Alt-F12 AF12
Ctrl-F1 CF1 Ctrl-F2 CF2 Ctrl-F3 CF3
Ctrl-F4 CF4 Ctrl-F5 CF5 Ctrl-F6 CF6
Ctrl-F7 CF7 Ctrl-F8 CF8 Ctrl-F9 CF9
Ctrl-F10 CF10 Ctrl-F11 CF11 Ctrl-F12 CF12
Shift-F1 SF1 Shift-F2 SF2 Shift-F3 SF3
Shift-F4 SF4 Shift-F5 SF5 Shift-F6 SF6
Shift-F7 SF7 Shift-F8 SF8 Shift-F9 SF9
Shift-F10 SF10 Shift-F11 SF11 Shift-F12 SF12
Left Arrow LAR Right Arrow RAR Up Arrow UAR
Ctrl-Left CLAR Ctrl-Right CRAR Down Arrow DAR
Arrow Arrow
Home HOM End END Insert INS
Ctrl-Home CHOM Ctrl-End CEND Delete DEL
PgUp PGU PgDn PGD Ctrl-PrtSc CPRT
Ctrl-PgUp CPGU Ctrl-PgDn CPGD
Alt-1 A1 Alt-2 A2 Alt-3 A3
Alt-4 A4 Alt-5 A5 Alt-6 A6
Alt-7 A7 Alt-8 A8 Alt-9 A9
Alt-0 A0 Alt- A- Alt-= A=
page 70
HARD DISK MENU SYSTEM Version 4.60
This menu action... ...types these keystrokes.
======================== ===================================
{KEY A B C D E F G ENTR} ABCDEFG keys and then the Enter key
{KEY CA AB SF9 SP} Ctrl-A, Alt-B, Shift-F9, Space Bar
{KEY A8 A 8 RAR} Alt-8, A, 8, and Right Arrow keys
{KEY} works with all programs except:
* Programs that clear the keyboard buffer when they start.
* Programs that ignore the DOS buffer and use their own
keyboard buffer.
* Memory-resident (TSR) keyboard enhancement programs that
expand the size of the DOS buffer or move it to a different
location.
EXAMPLE: This menu action starts Lotus 1-2-3 and puts the 10
keystrokes in the DOS buffer to automatically retrieve the file
named "BUDGET".
C:~CD\LOTUS~123~{KEY / F R B U D G E T ENTR}
EXAMPLE: This menu action takes you to page W in menu file
HDM.250:
{MENU 250}{KEY W}
EXAMPLE: This menu action runs entry W2 in HDM.250 and then
returns you to the current menu file.
{MENU 250}{KEY W 2}||{RETURN}
EXAMPLE: In the next example, you pick menu entry L1, which
runs Lotus 1-2-3. When finished, you are asked whether to back
up the 1-2-3 worksheet files. If not, the menu action is ended.
If you do answer "Yes," the keyboard buffer is filled with L2,
which runs that menu entry. By having the backup procedure
called from a separate menu entry, L2 can be run on its own
when needed:
L1: C:~CD\LOTUS~123~||{CONFIRM Backup 1-2-3 files?}{KEY L 2}
L2: {CK A}Copy C:\LOTUS\*.WK? A:\
page 71
HARD DISK MENU SYSTEM Version 4.60
================================================================
{LOGOFF}
OVERVIEW: Log a user off HDM, if one was logged on.
DETAILS: This function logs you off HDM if you were logged on.
Otherwise, it does nothing. Unlike the choice "Log Off
Automatically" in the Security menu and the "Log Off" choice in
the Exit menu, this function does not automatically run the
same menu entry specified in "Log Off Automatically." However,
that menu entry can contain the {LOGOFF} function so all users
will end up doing the same thing when they leave HDM.
EXAMPLE: This menu action will first log you off a network and
then log you out of HDM:
K:~CD\NETUTILS~LOGOUT~||{LOGOFF}
================================================================
{MENU ###}
FORMAT: {MENU 999}
OVERVIEW: Creates or uses another menu file (0-999).
DETAILS: This function allows you to create or read in another
menu file. The "###" is any number from 0 to 999, which allows
you to select any of the 1000 menu files.
Zero is the default menu file. The name of the current menu file
is displayed below the page index. If you try going to a menu
file that doesn't exist, a window is opened that will let cancel
the request or create a new blank menu file. If you create one,
you can immediately begin adding new entries to it.
When you use the {MENU #} function to display another menu file,
you can use the Esc key, the {RETURN} function, or choose "Prior
Menu" from the Exit menu to go back to the original menu file.
There is no limit to the length of a menu chain. Menu 1 can
call Menu 2, which in turn can call Menu 888, which can then
call Menu 317, etc. Pressing Esc or using {RETURN} will always
step you back through the chain. Each menu file has its own
unique set of local variables so when you go to another menu
file, it can display different colors, have different macros,
different borders, titles, etc.
EXAMPLE: This menu action calls menu file HDM.077:
page 72
HARD DISK MENU SYSTEM Version 4.60
{MENU 77}
================================================================
{NOCLEAR}
OVERVIEW: Doesn't clear the screen before running a menu entry.
DETAILS: Normally, HDM clears the screen before a menu entry is
run. This function keeps the last HDM screen visible while that
entry runs.
EXAMPLE: This menu action runs PC Tools' PCSHELL without first
clearing the screen.
{NOCLEAR}C:~CD\PCTOOLS~PCSHELL
================================================================
{PROJECT}
OVERVIEW: Returns the current project name.
DETAILS: This menu function is replaced by the project name
provided by either the {SETPROJECT} or {GETPROJECT} functions.
The project name can also be changed by the "Change Project"
command in the Global menu or automatically at logon time by
setting an option in "Global Settings" from the Global menu.
This function also works in the title lines at the top of your
menu. {PROJECT} can be used in the title lines above the User
Menu that are set up using "Top Box Titles" in the Local menu.
EXAMPLE: If the project field contained "33-154B", then the
menu action:
C:~CD\PROJECTS~EDIT {PROJECT}.DOC~
becomes
C:~CD\PROJECTS~EDIT 33-154B.DOC~
EXAMPLE: In the title lines from the "Top Box Titles" choice of
the Local menu:
Working on Project Name {PROJECT}
becomes
Working on Project Name 33-154B
page 73
HARD DISK MENU SYSTEM Version 4.60
================================================================
{REBOOT}
OVERVIEW: Allows you to reboot your computer.
DETAILS: This function allows you to reboot your computer. It
has the same effect as pressing the keys Ctrl-Alt-Del.
For example, you can use this function to make changes to the
AUTOEXEC.BAT or CONFIG.SYS files and automatically reboot the
system with the new configuration.
WARNING: You may have trouble if using disk caching software
with delayed writing to disk. You should "flush" the cache so
your data is saved to disk or else wait for the delayed writing
to occur. For example, if you were using the new SmartDrive
software for Windows 3.1, you would want to type "SMARTDRV /C"
to save the cache to disk before using this function. You can
also use the new function {DELAY #} to pause HDM until your
data is written to disk by the disk caching software.
EXAMPLE: This menu action copies a file called CONFIG.NEW in
place of your CONFIG.SYS and restarts your computer:
COPY C:\CONFIG.NEW C:\CONFIG.SYS~SMARTDRV /C~{REBOOT}
================================================================
{RETURN}
OVERVIEW: Returns you to the previous menu file.
DETAILS: This function returns you to any previous menu files
from which you journeyed. If you are already at the base menu
file, then you'll be told there is no where to return to. The
base menu file is usually zero, but it can be different if you
used HDM's -M startup switch or selected another starting menu
file in the User ID Security Table.
For example, assume you were taken to Menu 150 because a menu
entry in another menu file had the function {MENU 150} in its
menu action. The {RETURN} function would take you back to that
previous menu file. Pressing the Esc key or selecting "Prior
Menu" from the "eXit" pull-down menu also returns you to the
previous menu file.
EXAMPLE: This menu action takes you to menu file HDM.775 and
runs menu entry C5. When done, you are returned to the menu
file from which you came:
page 74
HARD DISK MENU SYSTEM Version 4.60
{MENU 775}{KEY C 5}||{RETURN}
================================================================
{RUN program/command/batch-file}
or {RUN! program/command/batch-file}
FORMAT: {RUN! DIR /W} or {RUN QA.BAT}
OVERVIEW: Immediately runs a program, DOS command or batch file
while HDM stays in memory. Use this function for small programs
only. {RUN! program/command/batch-file} is the same as {RUN},
but pauses before redisplaying HDM's User Menu.
DETAILS: This function allows you to run a program, DOS command
or a batch file without leaving HDM. Since HDM remains in
memory when running a program this way, some programs may not
have enough memory to run.
This function makes using small programs much quicker since HDM
does not have to reload itself after running your program. It
can also be helpful if you want to see a directory listing
before replying to a prompt that asks for a file name.
For this function to work, you must either have a path to the
program, DOS command or batch file, or provide the full path
with the file name.
NOTE: Some DOS commands, such as COPY, are internal and do not
require a path at all.
EXAMPLE: If you want to run your word processor, but you don't
remember the names of the files you want to edit, try this menu
action:
{RUN! DIR C:\WPDIR\*.DOC}C:~CD\WPDIR~WP {?Enter document name}~
The "!" after the RUN causes a pause before returning to HDM so
you can see the result of the DIR command on the screen. Press
any key to return to HDM, which then asks for the document name.
You enter the name and your word processing program starts using
the document whose file name you found and entered.
EXAMPLE: Here's an example of listing a file to the screen after
seeing a list of files:
{RUN! DIR C:\BAT /W}{RUN LIST C:\DIR\{?Enter file name to list}}
page 75
HARD DISK MENU SYSTEM Version 4.60
First, a wide (/W) directory listing of C:\BAT is displayed and
the system pauses. HDM then asks for the file name. Finally,
the LIST program runs with the file you picked. Note that LIST
is RUN without the pause option since it waits for keystrokes
before returning to HDM.
================================================================
{SELECT MenuTitle~Choice1~...~Choice15}
or {VSELECT MenuTitle~Choice1~...~Choice15}
FORMAT: {SELECT DISK SIZE~720K=/N:9/T:80~1.44MB=}
OVERVIEW: Displays a horizontal or vertical menu of up to 15
choices. The user's choice will replace the {SELECT} function
in the menu action. Also the selected menu entry is put into %0
for later use.
DETAILS: To select your entry quickly, you can press the first
highlighted letter. If using a mouse, simply click on your
choice.
NOTE: The highlighted letter is the first capitalized letter.
To avoid conflicts, make sure that each entry has a unique
character highlighted. To select your choice, press the high-
lighted character, click on the choice with your mouse, or move
the cursor to the choice and press the Enter key.
The title and each choice of the menu choices must be separated
by a tilde (~). If one of the choices begins with a "?", it is
treated like the {?prompt} menu function when it is selected.
You can have an empty choice by using two tildes: ~~. Besides
replacing the function itself, the selected choice is placed in
the %0 parameter so you can use it in additional places in the
same menu action.
To make your menu choices easier to use, you can have the menu
display certain text but return a different value when that
menu choice is selected. Instead of using "Choice1," you would
type:
DISPLAY=CHOICE1
DISPLAY is what you want the menu to display to the user of
your menu. CHOICE1 is the value that is used when that menu
choice is selected. This next example involving formatting a
diskette in different sizes shows how this works.
EXAMPLE: In this example, formatting a diskette is made easier
page 76
HARD DISK MENU SYSTEM Version 4.60
by providing clear choices. A window opens with the title
"SELECT DISK SIZE". The two menu entries are "720K" and
"1.44MB". When "720K" is selected, HDM returns "/N:9/T:80" and
the menu action becomes "FORMAT A:/N:9/T:80". If "1.44MB" is
chosen, nothing is returned since there is nothing to the right
of the equal sign and the menu action is "FORMAT A:".
FORMAT A:{SELECT DISK SIZE~720K=/N:9/T:80~1.44MB=}
EXAMPLE: In this example, the menu action copies all files in
C:\WP that end with .DOC to drive A or B.
COPY C:\WP\*.DOC {SELECT Pick Backup Disk~A:~B:}
EXAMPLE: This menu action runs LOGIN with the selected name. If
the user picks "?Enter Name", HDM asks you for your name and
then replaces the {VSELECT} function with the name given. Note
that there are no braces around the "?Enter Name" so that this
function will not run before the {VSELECT}. To hide your input,
you can use two question marks (see the {?} function for more
details).
LOGIN {VSELECT User~Dan~Beth~Jim~Laura~?Enter Name}
================================================================
{SETPROJECT project-data}
FORMAT: {SETPROJECT LAWSON}
OVERVIEW: Sets project to the information in this function.
DETAILS: This function allows you to change the project data
from within a menu action. The project name is written to the
HDM.LOG log file if you started HDM with its -L switch.
EXAMPLE: This menu action changes the project name to MyProject.
{SETPROJECT MyProject}
EXAMPLE: This menu action changes the project name to that of
the current user that is logged on to a network:
{SETPROJECT {%USER%}}
NOTE: To use %USER% in this function, you need to use an
environment variable such as "SET USER=name" where "name"
is the name of the user. On networks, users often have such
an environment variable set up for them.
page 77
HARD DISK MENU SYSTEM Version 4.60
================================================================
{STEP}
OVERVIEW: Used to debug menu entries that aren't yet working.
This function displays the menu action after each function
executes.
DETAILS: This function is useful in debugging (fixing) menu
actions that use functions. After HDM sees the {STEP} function
in a menu action, it displays a window showing what the action
looks like as each function executes and just before the action
is actually run by DOS. This function does not hinder the running
of the menu action. However, it is best to remove the {STEP}
function from the menu action once it is no longer needed.
EXAMPLE: In the next menu action, the {STEP} function will step
through each function one at a time so you can see how each
individual function affects the menu action:
{STEP}!echo {FILE {DIR {SELECT Disk~A:~B:~C:~D:}\}}
================================================================
{USER}
OVERVIEW: Used to retrieve the current User ID, if anyone is
logged on to HDM.
DETAILS: This function retrieves the HDM User ID (if one was
used to log on). You must have at least one entry in the User
ID Security Table in the Security menu for this to work.
This function can also be used in the title lines of your menu
to display who is using the current menu file. To configure
this, select "Top Box Titles" in the Local menu.
EXAMPLE: In this example, if Laura was logged on to HDM, then
the prompt window would say:
Dear Laura, please enter file you want to see.
TYPE {?Dear {USER}, please enter file you want to see.}
EXAMPLE: To customize your menu title to say: "Laura's IBM PC -
User Menu," you would change your title lines to say this:
{USER}'s IBM PC - User Menu
page 78
HARD DISK MENU SYSTEM Version 4.60
TRACKING PROJECTS AND PEOPLE
HDM is not only a menuing system but can also be a great project
and people management tool.
Whether using a network or an individual PC, HDM can keep track
of users' activities. How much time do they spend working on
this PC? On a certain project? What IDs are being used? Which
menu items are being underused or neglected? How much time do
you spend on a certain project?
USING HDM.LOG
Valuable information about how HDM is used is collected in the
file HDM.LOG. This "log" file is an ASCII text file that shows
which users use which menu entries and when.
To start saving information to HDM.LOG, you must start HDM with
the -L startup switch. See the chapter "Customizing HDM" for
how to use this and other switches.
!! To activate the log file:
1. From the DOS prompt or AUTOEXEC.BAT file, start HDM with the
-L switch. Type:
HDM -L[path] (press Enter)
where "[path]" is the drive and directory where you want the
HDM.LOG file to be saved. If you do not include a path, the
HDM.LOG file is saved to the directory where the HDM program
files are located.
You can also start the log file by using the "SET HDM="
environment variable (the other way of configuring HDM when
starting it).
2. Use HDM as you normally would. The HDM.LOG file records what
you (and others) are doing while in HDM.
VIEWING HDM.LOG
If you use a file viewer, your log file may look like this:
≡Jim Jones 1992052313:117000A1 RUN=Dir B:
≡Jim Jones 1992052313:147000A1 ENDrun
≡Laura Lane 1992052313:217000B5Acct31 Directory of A:
≡Laura Lane 1992052313:227000B5Acct31 END!
page 79
HARD DISK MENU SYSTEM Version 4.60
What do these numbers and codes mean? From left to right, the
HDM.LOG log file displays the following (lengths are in parentheses):
* CODE (1) - Used by HDM to identify the record format.
* USER (25) - User ID.
* DATE (8) - The date in the format YYYYMMDD
("19920601" = June 1, 1992).
* TIME (5) - The time in the 24-hour format HR:MN
("13:05" is 1:05 p.m.).
* DAY (1) - The day of the week (1=Sunday, 7=Saturday).
* FILE (3) - The menu file number (000 to 999) or "DOS" if the
user exited from HDM or used the DOS window.
* ENTRY (2) - Menu page and number (A1 through Z0), "xt" for an
exit to DOS, or "wd" if the command was run from the DOS window.
* PROJECT (25) - The project name, if any was chosen.
(We'll discuss projects later in this chapter.)
* ACTION (3-99) - Either a description of what was run or "END".
If the discription starts "RUN=", the {RUN} function was used.
If it starts with "DIAL=", a phone number was dialed.
TRACKING PROJECTS
HDM offers you a way to keep track of projects you may be
working on. How does it work? You first must enter a project
name (up to 25 characters). You can do this in any of four ways:
* Select "Change Project" (Alt-2) from the Global menu.
* Create a menu entry that uses the {GETPROJECT} function, which
asks you for a project name.
* Create a menu entry that uses the {SETPROJECT} function, which
provides a specific project name for you.
* Changing the "Global Settings" of the Global menu to ask all
users for a project name. Once set, every time HDM starts, you
and others will be asked for a project name.
HINT: You can use the User ID Security Table to have HDM
automatically ask certain users for a project name. First,
create a menu entry that asks for a project name. Then, use the
User ID Security Table to automatically run this entry for the
appropriate users.
No matter which method you use to enter a project name, the
project name will appear in the HDM.LOG file along with the
other information.
page 80
HARD DISK MENU SYSTEM Version 4.60
USING {GETPROJECT} TO ENTER A PROJECT NAME
The {GETPROJECT} function can be used in a menu action to ask
for a project name. This name will then be recorded in the
HDM.LOG log file and used by the {PROJECT} function. This
function is the same as choosing "Change Project" from the
Global menu (or Alt-2).
It shows the current project name and allows you to change it.
The change, which takes place immediately, is used by the
{PROJECT} function and is written to the usage log.
USING {PROJECT} TO RETRIEVE A PROJECT NAME
You can use the {PROJECT} function to read the project name
into other functions and programs.
EXAMPLE: If the project name is "33-154B", then the menu action:
C:~CD\PROJECTS~EDIT {PROJECT}.DOC~
becomes
C:~CD\PROJECTS~EDIT 33-154B.DOC~
!! To add the project name to your Title Box:
The {PROJECT} function can also be used in the title lines at
the top of your menu.
1. Select "Top Box Titles" (Shift-F8) from the Local menu.
2. Enter "{PROJECT}" on one of the title lines.
3. Press F2 to save your changes.
From now on, the current project name will be displayed at the
top of your User Menu.
EXAMPLE: In the title lines from the "Top Box Titles" choice of
the Local menu:
Working on Project Name {PROJECT}
becomes
Working on Project Name 33-154B
page 81
HARD DISK MENU SYSTEM Version 4.60
USING {SETPROJECT} WITH PROJECTS
You can use the {SETPROJECT} function to automatically provide
a specific project name so you don't have to enter one. Use
this function from within a menu action.
EXAMPLE: This menu action changes the project name to 1234-5678:
{SETPROJECT 1234-5678}
EXAMPLE: This menu action changes the project name to that of
the current user that is logged on:
{SETPROJECT {%USER%}}
NOTE: To use %USER% in this function, you need to use an
environment variable such as "SET USER=username" where
"username" is the name of the user. On networks, users often
have such an environment variable set up for them.
CREATING REPORTS
You can display the HDM.LOG information in HDM's new Report
Module. The Report Module lets you print reports to the screen,
to your printer, or to a file. To speed loading of HDM4.EXE,
this module is a separate program.
The Report Module is quite flexible; you can list only the
information you want to analyze, such as for a specific day,
project, or user. You can save subsets of the HDM.LOG file
to a log file of another name.
!! To load HDM.LOG (or any log file):
1. Select "Reports" from the Exit menu (F5) to access the
Reports Module.
NOTE: Although not needed now, the Report Module, like HDM
itself, uses F10 to access its Top Menu.
2. Select the drive and directory where your log file is
located.
A list of directories and log files on the drive where HDM is
installed is displayed. You can switch to other directories by
pressing Enter on your choice.
If you choose "Root", you will be shown the root, or top,
page 82
HARD DISK MENU SYSTEM Version 4.60
directory of the current drive. If you choose "Parent", you
will be shown the directory above the current one. To change
drives, press F4. If you press Esc, you will cancel the menu
action and return to the HDM user menu.
To speed searching, you can jump to a specific directory or
file name by pressing the first letter with which it begins.
By pressing the letter repeatedly, the cursor highlights the
next directory or file that starts with that letter and then
starts at the top again.
3. Highlight the HDM.LOG file and press Enter to display it.
The HDM.LOG file is loaded as the file TEMP.HDM. Each line in
HDM.LOG is a "record," showing who did what while in HDM. Use
these keys to move through the file:
* Home/End - jumps to the first or last record of the file.
* PgUp/PgDn - moves to the previous or next page of records.
* Up/Down Arrow - moves to the previous or next record.
4. Press Enter on the record (line) of the HDM.LOG file from
which you want to see more information.
When you press Enter on one of the lines in the HDM.LOG file, a
window displays the complete information for that record.
USING FILTERS
You can use "filters" to limit what you want to see in HDM.LOG,
such as menu entries run by a specific user or menu entries
used for a specific project. You then can save this subset of
the HDM.LOG file to a new file.
!! To select certain records for display:
1. After loading a log file, select "Filter" (F2).
2. Select how you want to limit what is displayed.
* All Records - no filtering is done.
* Date Range - enter the start and end dates.
* Menu Entry - enter the menu file number and menu entry. You
can also just enter the menu file or just the menu file number
and page letter. This way, you can see who is using the menu
entries in a certain menu file or on a certain menu page.
page 83
HARD DISK MENU SYSTEM Version 4.60
* Project - enter the partial or complete project name. You
will then see all records that match that name, even if only
one letter.
HINT: To see records that have NO project name, press the Space
Bar once, entering no project name.
* Time Range - enter the start and end times in 24-hour format.
* User ID - enter the partial or complete User ID. You will
then see all records used by those people, even if only one
letter.
3. Press F2 or Enter to save your filter information.
HDM displays the lines of the HDM.LOG that match your filters.
The number of lines is displayed in the lower right corner.
4. To further limit the number of records, you may save your
filtered log file to the same or different name. Then select
another filter.
The next procedure discusses how to save your filtered log file
to a different file.
!! To save your displayed list to a log file:
After limiting the lines of HDM.LOG to what you want, you can
save the information to another disk file. This disk file is
saved in the XBase (.DBF) format for use in dBase or other
database programs.
1. After loading a log file and filtering it (if desired),
select "Save As" from the File menu (Alt-F3).
2. Confirm whether you want to save only the filtered records
or the entire file.
CAUTION: To save the filtered records back to the original log
file, select "Save" (Alt-F2). However, if you save the filtered
records to the original file, the unfiltered records are lost.
3. Enter the file's name or accept the default file name
"HDMLIST."
DESIGNING REPORTS
Besides viewing HDM.LOG on your screen, you can create a
custom-made report that you can either view or print. The steps
page 84
HARD DISK MENU SYSTEM Version 4.60
to making a report are:
* Open or create a report format.
* Set up filters to limit your choices, if desired.
* Display the report to the screen, if desired.
* Print your report to paper or to an ASCII disk file.
NOTE: You must first create a report format or open one that
was previously saved before you can display or print a report.
!! To open a report format:
1. Select "Open Format" from the "Report" menu (Ctrl-F1).
2. Select the report name from the list displayed (if any).
!! To create a report format:
1. Select "Create Format" from the "Report" menu (Ctrl-F2).
2. Press Enter on the fields you want included in the report.
If using a mouse, click on your choices.
An "X" appears next to each selected field.
3. Press F4 to change the default length of any field.
You may want to shorten a field so that it fits on the width of
one page. However, some field information may be truncated.
4. Press F2 to save your report format.
5. Choose Yes to save the report to disk to use again at a
later time, or No to use it one time only. If you choose
Yes, enter a report name to identify it.
NOTE: You can choose "Save Format" (Ctrl-F3) from the "Report"
menu at any time to save your report setup.
!! To set up filters for your report:
1. After loading a log file, select "Filter" (F2).
2. Select how you want to limit what is printed.
* All Records - no filtering is done.
* Date Range - enter the start and end dates.
* Menu Entry - enter the menu file number and menu entry.
page 85
HARD DISK MENU SYSTEM Version 4.60
* Project - enter the partial or complete project name.
* Time Range - enter the start and end times in 24-hour format.
* User ID - enter the partial or complete user ID.
3. Press F2 or Enter to save your filter information.
HDM displays the lines of the HDM.LOG that match your filters.
The number of lines is displayed in the lower right corner.
!! To print your report to the screen:
1. After loading a log file and selecting a report format,
select "Display Report" from the "Report" menu (Ctrl-F4).
2. Press Enter to display only the records that match your
filter(s). Otherwise, press Esc to display all records.
3. Scroll through your report using these keys:
* Left and right arrows - move you left and right,
respectively, through the report.
* Up and down arrows - move you up and down, respectively,
through the report.
* F10 - opens the Report Module's Top Menu to make any changes
in the format.
* Tab and Shift-Tab - moves you right and left, respectively,
one screen at a time. You can also use Ctrl-Right Arrow and
Ctrl-Left Arrow.
* F6 - goes to the top of the report.
(You can also use Ctrl-Home or Ctrl-PgUp)
* F8 - goes to the end of the report.
(You can also use Ctrl-End or Ctrl-PgDn)
* F4 - freezes portions of the display. If you have a lengthy
report, you can have up to 10 horizontal rows and up to 60
lefthand characters be frozen so you can scroll to other parts
of the screen while still viewing this information.
4. Press Esc to exit the displayed report and return to the log
file.
!! To print your report to a printer:
1. After loading a log file and selecting a report format,
select "Print Report" from the "Report" menu (Ctrl-F5).
2. Press Enter to print only the records that match your
filter(s). Otherwise, press Esc to print all records.
page 86
HARD DISK MENU SYSTEM Version 4.60
!! To print your report to a file:
1. After loading a log file and selecting a report format,
select "Report to File" from the "Report" menu (Ctrl-F6).
2. Press Enter to write only the records that match your
filter(s). Otherwise, press Esc to print all records.
3. Accept the default name and path "\HDMLIST.TXT" for the text
file or enter your own name.
NOTE: The backslash will place HDMLIST.TXT in the root
directory of the drive where HDM.LOG is kept.
page 87
HARD DISK MENU SYSTEM Version 4.60
ADDING SECURITY
HDM allows you to control access to any menu entry and to the
commands in the Top Menu. HDM's security options not only
prevent unauthorized access to vital information (such as
salary figures) but also protect others from accidentally
destroying data files or HDM's menu structure. This version
of HDM offers better security than ever.
SELECTING YOUR LEVEL OF SECURITY
Do you need HDM's security options? You need to analyze how
your system is set up, who uses it and how much experience they
have. You must then evaluate the trade-off between security and
ease of use.
AN OPEN SYSTEM
You may want to run a completely "open" system without
individual passwords and restrictions. It is the simplest to
set up and easiest to use since no passwords need to be
entered. However, an open system is best only if all users of
the system are "computer literate" (comfortable with DOS
commands) and are willing to work with the same menus and
colors.
A SECURE SYSTEM
You could also provide "partial security". Partial security is
ideal for a family's home computer. You are the primary user
and the one who is setting up HDM. Others in your family may
not be comfortable with DOS commands and directory structures.
In this case, you might design different menus for different
family members. Each user would log on and get a personalized
menu.
You might also want to restrict access to the Top Menu so that
nothing could be altered accidentally. In effect, you would be
a "system manager" and would create a friendly HDM environment
for the rest of the family.
SECURITY BY THE NUMBERS
HDM provides up to 99 security levels (1 through 99). HDM comes
with all security levels set to a default of "00". If you want
to have a totally "open" system, you do not need to change
anything.
page 88
HARD DISK MENU SYSTEM Version 4.60
Security is added by assigning a security level to the people
who'll be using HDM. You then assign a security level to the
different parts of HDM you want to protect. Once security
levels are established, you can access all HDM menus and menu
entries that have a security level equal to or LESS than your
own. If your security level is less than an area you are trying
to access, you'll be asked for a password for that security
level or a security level higher than that one. This is called
the security level password. If you don't type the correct
password, you cannot access that area.
NOTE: If someone is asked for a security level password and
enters either the password for that security level OR any
security level above that, they will be allowed access.
Security levels are just numbers. The 99 security level gives
you the highest security clearance. Because HDM offers 99
security levels does not mean you must use them all. Also, you
can use only a few security levels, such as 1, 2, 3, 4 and 5.
However, we recommend you leave gaps between numbers so you
have the flexibility to add more between existing levels.
Perhaps you could assign your first security levels in
multiples of 10 (10, 20, 30, 40 and 50).
HINT: We recommend you first create a "backdoor" for yourself
so you are never locked out of HDM. This backdoor should be
security level 99. Then, use a lower security level such as 90
for your security of critical parts of HDM. If you are ever
locked out of HDM, you can use the 99 backdoor to get back in
and make corrections.
Adding security requires up to three steps:
* Creating security levels in the Master Password Table.
* Adding up to 254 users to the User ID Security Table and
setting their security level.
* Restricting access to the Top Menu and individual menu
entries, pages and files.
These steps can be used separately. For example, you can add
users to the User ID Security Table so that each user must type
a password to get into HDM. However, once in, they will not be
restricted from using any part of HDM. Conversely, you can add
security levels in the Master Password Table and prevent people
from using certain parts of HDM. However, you do not need to
add users to restrict their use of these sections.
page 89
HARD DISK MENU SYSTEM Version 4.60
CREATING SECURITY LEVELS
Security in HDM is simple but effective. By placing a numerical
security level on a menu entry, you can prevent users of lower
security levels from accessing that menu entry.
You first create security levels in the Master Password Table.
You then assign security levels to other users of HDM through
the User ID Security Table. The User ID Security Table lists
the people who will be using HDM and what their security level
is. (Both tables are found in the Security menu from the Top
Menu.) Since you will be the system manager, you will need to
give yourself a higher security level than others.
!! To create or change a security level:
NOTE: If using this procedure for the first time, create two
high security levels for yourself, the system manager. One
security level, 90, for example, should be used for your
everyday security use. This security level can be used to
restrict use to high-level HDM functions. Another security
level, 99, should be used as your "backdoor" to override
forgotten or misused passwords. Then, use this procedure to
create other security levels for your other users.
1. Select "Master Password Table" from the Security menu
(Alt-F8).
This table displays the numbers 1 through 99 for up to 99
different security levels. With any given security level, a
user can access all features that have a security level equal
to or less than that level. For example, if you had a security
level of 50, you can access anything with a security level from
1 to 50, but not 51.
NOTE: If you have a security level of 50 and gave the Top Menu
a security level of 90, you would NOT be able to access it.
2. Enter the security level number you want to create or delete.
Assuming you'll be the "system manager," enter an everyday
security level, such as 90, in the Master Password Table. Press
Enter.
3. Enter the same password twice.
This security level password will be required if you wish to
use a menu entry, menu page, or menu file that has had its
page 90
HARD DISK MENU SYSTEM Version 4.60
access restricted to a certain security level and your security
is less than that. Enter a password that is easy to remember
but difficult for others to guess. You might want to jot down
the passwords you assign and keep them in a safe place. Repeat
this and the previous step to create other security levels,
such as 99 for your security "backdoor."
4. Press F2 to save your changes.
ADDING USERS
Once security levels are created, you can add "accounts" for
everyone who will be using HDM. For each person, you can set
their security level, logon password and startup options.
!! To add or change user accounts:
NOTE: If using this procedure for the first time, add your name
and give yourself a high security level. We recommend a level
of 90. For your safety, do not assign anyone the highest
security level of 99. Then, use this procedure to add other
users.
1. Select "User ID Security Table" from the Security menu
(Alt-F9).
2. To add new users, press the Insert (Ins) key. To change
information on an existing user, move your cursor to the
user account you want to change and press Enter.
3. Enter the following information for each user:
* User ID.
* Menu file you want this user to first use when HDM starts.
* Menu entry number you want automatically run for this user
(optional).
* Security level for this user (you may be asked to enter the
password for that security level) (optional).
* Whether or not to enter a logon password for this user now
(optional).
NOTE: Each individual's logon password is independent of the
password used for their particular security level.
4. Press F2 to save your changes for this user.
5. Press F2 again to save your changes to the User ID Security
Table.
page 91
HARD DISK MENU SYSTEM Version 4.60
EXAMPLE: In a family scenario, you can give your spouse a
security level of 70 and each of your children a security level
of 50.
In the figure below, you can see that each user has individual
menu files, different security levels and logon passwords. Also
note that everyone but you (the system manager) has a menu
entry that is automatically run when HDM is started.
╔══════════════════════════════════════════════════════════════╗
║ User Identification │ Menu File │ Run! │ Security │ Password ║
╠══════════════════════════════════════════════════════════════╣
║ Bob │ HDM.300 │ │ 99 │ √ ║
║ Brenda │ HDM.299 │ A1 │ 90 │ √ ║
║ Melissa │ HDM.150 │ A5 │ 50 │ √ ║
║ Kathy │ HDM.100 │ B7 │ 50 │ √ ║
║ │ │ │ │ ║
║ │ │ │ │ ║
║ │ │ │ │ ║
║ │ │ │ │ ║
║ │ │ │ │ ║
║ │ │ │ │ ║
╠══════════════════════════════════════════════════════════════╣
║ Enter=Change Esc=Cancel F2=Save Ins=Add Del=Delete ║
╚══════════════════════════════════════════════════════════════╝
!! To change your logon password:
1. When logging onto HDM, instead of using your normal logon
password, enter:
CHANGE (press Enter)
2. Enter your old password.
3. Enter a new password.
4. Enter your new password again to verify you typed it correctly.
Your new logon password is recorded by HDM and will be required in
future sessions.
RESTRICTING ACCESS
Now that you have created security levels for various users of
HDM, how do you restrict access and to what? There are four
areas that you can protect:
page 92
HARD DISK MENU SYSTEM Version 4.60
* Hide or restrict use of the Top Menu.
* Restrict access to a pull-down menu choice.
* Restrict use of a single menu entry, menu page or menu file.
* Prevent changes to a menu file.
HIERARCHY OF SECURITY
HDM has a hierarchy of security that you must follow.
The security of a menu entry takes precedence over the security
of the menu page. In other words, if menu entry A5 has a
security level of 50 and menu page A has a security of 30, the
user with security level 30 will be allowed access to the menu
page but will be asked for a security level password on the
fifth entry. If you change the security of the menu entry to
"00", then the menu entry assumes the security level of the
menu page (30).
Likewise, the security of a menu page takes precedence over the
security of the menu file. If you change the security of the
page to "00," then the page assumes the security level of the
menu file.
!! To hide or restrict access to the Top Menu:
You may not want others to access the Top Menu or make changes
to it. For example, you may not want others to access the
Master Password Table or the User ID Security Table. Use this
procedure to deny or limit access to the Top Menu.
1. Select "Hide/Disable Top Menu" from the Security menu
(Alt-F6).
This security feature allows you to keep certain people from
even seeing the Top Menu. This feature disables the F10 and
slash keys used to access the Top Menu.
NOTE: To access the Top Menu when it's hidden, you need to type
"/UNHIDE" from the User Menu and enter a password of a security
level equal to or higher than the hidden level.
2. Assign a security level.
Enter a security level higher than that of the users you want
to hide the Top Menu from. For the most security, enter a level
of 90.
page 93
HARD DISK MENU SYSTEM Version 4.60
3. Select "Top Menu Entries (All)" from the Security menu.
This security feature allows unauthorized people to still see
the Top Menu but not make any choices from it (Menu, Page,
Security, Local, Global and Exit). The security level specified
by this command becomes the default for the commands in each
pull-down menu. It can be overridden for an individual
pull-down menu command by placing the cursor on the command and
pressing Alt-F1 (described later).
4. Assign a security level.
Enter a security level above that of the users you want to
restrict from using the Top Menu. For a high level of security,
enter a level of 90, for example.
NOTE: Users who are not allowed access to the Top Menu will not
be able to exit HDM until the system manager assigns a lower
level of security to the choice "Exit HDM" (F3) in the Exit
menu. See the following procedures for how to assign a security
level to a pull-down menu choice.
EXAMPLE: In a family scenario, you could assign a security
level of 20 for hiding the Top Menu and 60 for the Top Menu
entries. Your children could press F10 and see all of the items
on the Top Menu because their security level (50) is greater
than the security level that hides the Top Menu (20). However,
only you and your spouse can access the Top Menu commands that
change HDM. If you raise the security level for "Hide/Disable
Top Menu" to greater than 50, then the Top Menu would be
invisible to your children.
!! To restrict access to a pull-down menu:
Besides protecting access to the Top Menu, you can restrict
access to individual pull-down menu choices. For example, you
may want to add security to the pull-down menu choice "Exit
HDM (F3)" so that users cannot exit HDM to the DOS prompt. By
limiting users to only the menu choices available from HDM, you
can protect your PC and its files from possible damage.
There are four pull-down menu choices that especially are
important to protect. They are:
* "Master Password Table" from the Security menu
* "User ID Security Table" from the Security menu
* "Inactive Execution" from the Global menu
* "Timed Execution" from the Global menu
page 94
HARD DISK MENU SYSTEM Version 4.60
NOTE: The inactive and timed executions are important to
safeguard because they bypass security when these menu entries
are run.
1. Open the Top Menu and highlight the pull-down menu choice to
be protected.
2. Press Alt-F1 to change the security level.
3. Assign a security level and press Enter.
This security level is the level another user must be equal to
or greater than in order to access that pull-down menu choice.
!! To restrict use of a menu entry, menu page or menu file:
To not allow someone to run certain menu entries, you can
restrict them from the individual menu entry, all the menu
entries in a menu page, or all the menu entries in a certain
menu file.
1. Open the Security menu (Alt-S).
2. Select what you wish to restrict:
* To restrict someone from running a single menu entry, select
"Set Security" (Alt-F1).
* To restrict someone from running entries in a single menu
page, select "Page Security" (Alt-F2).
* To restrict someone from running entries in a single menu
file, select "All Menu File Entries" (Alt-F3).
3. If restricting access to an individual menu entry or menu
page, choose the menu entry or menu page and press Enter.
4. Assign a security level and press Enter.
This security level is the level another user must be equal to
or greater than to access this restricted menu entry, menu page
or menu file.
!! To prevent changes to a menu file:
Although you may not want to keep someone from using your menu
file, you may not want them to change it. This procedure
protects your work in creating a menu file.
page 95
HARD DISK MENU SYSTEM Version 4.60
1. Select "File Change Protection" from the Security menu
(Alt-F4).
2. Assign a security level and press Enter.
This security level is the level another user must be equal to
or greater than to change the menu file.
REMOVING SECURITY
To remove security from a menu entry, menu page or menu file,
set the item's security level to zero ("00").
!! To remove security:
1. Open the Security menu (Alt-S).
2. Select what item from which you wish to remove security:
* To remove security from a single menu entry, select "Set
Security" (Alt-F1).
* To remove security from a single menu page, select "Page
Security" (Alt-F2).
* To remove security from a single menu file, select "All Menu
File Entries" (Alt-F3).
* To remove security from a single pull-down menu choice,
highlight the pull-down menu choice and press Alt-F1.
3. If removing security from an individual menu entry or menu
page, choose the menu entry or menu page and press Enter.
4. To remove security, enter a security level of "00" and press
Enter.
WARNING: DO NOT delete the password in the Master Password
Table for that security level since that does not remove the
security from the item. Rather, deleting the password may lock
you out of accessing the item if there are no passwords on
security levels above the one that was deleted.
page 96
HARD DISK MENU SYSTEM Version 4.60
USING HDM ON A NETWORK
HDM has many features ideal for local area networks (LANs).
With a little work, HDM can help you get more from your LAN.
Some benefits include:
* A consistent, easy-to-use menuing system.
* Sharing of network users' own menu files on their local
computer with those shared from a common file server.
* Up to 99 levels of security to protect vital network files.
* Automated login procedures.
* Activity log of what each user is doing on the network.
SEPARATE X.BATS
Each HDM user must have a separate temporary work file called
X.BAT. This file keeps track of where the user was in HDM. This
file is especially useful for allowing users to reload HDM and
return to the menu entry from which they exited. On a network,
each user needs their own X.BAT file so that do not overwrite
another's X.BAT. To avoid this conflict, you have two solutions:
* Assign a different read/write directory to each user where
X.BAT is located.
* Use a different work file name for each user instead of X.BAT.
A DIFFERENT DIRECTORY
To point HDM to a different directory for X.BAT, start HDM with
the -W switch.
EXAMPLE: To use this switch, you would add "-W" after the HDM
command that loads HDM.
HDM -Wm:\network\jimh
where "m:\network\jimh" is the network user's own directory.
EXAMPLE: An alternative is to set the environment variable HDM
in each user's AUTOEXEC.BAT file to another name like this:
SET HDM=-Wm:\network\jimh
A DIFFERENT FILE NAME
To tell HDM to look for a different file name than X.BAT, use
the "SET X=" environment variable.
page 97
HARD DISK MENU SYSTEM Version 4.60
EXAMPLE: In your AUTOEXEC.BAT file, you would set the
environment variable X in each user's AUTOEXEC.BAT file to
another name.
SET X=MENU or SET X=%USER%
Once set, the user must type the righthand word instead of "X"
to return to HDM. For more information on startup switches and
environment variables, see the chapter "Customizing HDM."
SHARING LOCAL AND NETWORK MENU FILES
Network users can use their own HDM menu files from their
own computer alongside menu files that are available on the
network. This allows network users to have their own personal
menus while using standardized menus on the network.
The -T, -G and -0 through -9 startup switches help network
users mix local (unique) and network (common) menu files.
The -T switch allows you to enter a path to where the menu
entries and local variables are stored (menu files HDM.000
through HDM.999). If each person on the network will have a
unique set of menu files, then they must also have their own
menu text files in their own read/write directories.
EXAMPLE: You can do this by using the -T switch when starting
HDM for each person on the network.
HDM -Tm:\network or SET HDM=-Tm:\network
where "m:\network" is the drive and directory where the HDM
menu files are stored.
The -G switch specifies the path to the configuration file
HDM.CFG. The HDM.CFG file contains the global settings for
all menu files.
The -0 through -9 switches are similar to -T but specify the
path to groups of 100 menu files. For example, -7 is for menu
files HDM.700 through HDM.799. Using these switches, you can
have some menu files that are only available through the
network server. Other menu files can only be available on the
network user's local computer.
EXAMPLE: In the next example, the menu files HDM.800-899 are
found on the network in directory H:\NETDIR, while HDM.900-999
are on the user's own hard disk directory D:\MYOWNDIR. The
page 98
HARD DISK MENU SYSTEM Version 4.60
remaining menu files, HDM.000-799 will default to the C:\HDM
directory.
This example also shows that every network user can share one
copy of HDM on the network server, although HDM could be
installed on every individual's computer. The advantage is that
only one set of files must be maintained.
PATH C:\;D:\MYOWNDIR
H:
CD\HDM
HDM -8H:\NETDIR -9D:\MYOWNDIR -WD:\MYOWNDIR -GH:\NETDIR
NOTE: One copy of HDM can be run from the network file server
and shared by several users.
AUTOMATED LOGINS
If you're using HDM's user names, HDM's -U startup switch and
its matching DOS environment variable can help automate logging
onto HDM and your network.
You first set an environment variable that has the user's name
and then refer to that variable in the startup switches for HDM
or through the "SET HDM=" environment variable.
EXAMPLE: Here is an excerpt of an AUTOEXEC.BAT file:
SET HDMUSER=LAURA
CD \HDM
HDM -UHDMUSER
or
SET HDMUSER=LAURA
SET HDM=-UHDMUSER
CD \HDM
HDM
When Laura starts HDM, HDM automatically reads the HDMUSER
variable and enters her User ID for her.
You can next automate the network login process. When you use
the User ID Security Table from the Security menu, set up each
user to automatically run a specific menu entry. This menu
entry could automatically run a batch file that has the user
log onto your network.
page 99
HARD DISK MENU SYSTEM Version 4.60
AUTOMATIC LOGOFF
Logging off your network can also be mandatory. After a set
amount of inactivity or whenever anyone logs off HDM, a certain
menu entry can run the command or batch file to log the user
off your network.
NOTE: These two activities - logging off after inactivity or
automatic execution of an entry during a normal logoff - are
independent of each other. You can have an automatic execution
of a menu entry at logoff, automatic logoff after inactivity,
or both.
!! To create an automatic logoff:
1. Select "Log Off Automatically" from the Security menu
(Alt-F7).
2. Enter any of the following:
* Number of inactive minutes before logoff ("00" to turn off).
* Menu file number containing the menu entry with the command
or batch file to log the user off your network.
* Page letter and entry number to run to log off the user
(leave blank to turn off).
3. Press F2 to save your changes.
NOTE: See the "Adding Security" chapter for more information
about security and the individual commands available in the
Security menu.
OTHER TIPS
With a little planning, HDM will work on Novell and other LANs.
Here are some basic tips:
* If everyone on the network will be using the same menu files,
ensure all the Top Menu commands are protected with a high
security level or that the Top Menu is hidden so only the
network administrator can access these commands and make
changes to menu entries.
* You can protect an individual menu file so that users can run
menu entries without restrictions. However, they will be unable
to add or change the menu file. Select "File Change Protection"
from the Security menu (Alt-F4) to add this extra security.
page 100
HARD DISK MENU SYSTEM Version 4.60
HDM MENU STRUCTURE
Below are two sections that describe the menu structure of HDM:
* All HDM pull-down menu commands plus their shortcut keys.
* Brief description of each pull-down menu choice.
PULL-DOWN MENU COMMANDS
Description Keystrokes Shortcut
====================================== ========== ========
SECURITY
Change security on one User Menu entry Alt-S S Alt-F1
Change security on a menu page Alt-S P Alt-F2
Change security on all menu entries Alt-S A Alt-F3
Prevent changes to current menu file Alt-S F Alt-F4
Change security on all Top Menu entries Alt-S T Alt-F5
Hide the Top Menu and F10 from the user Alt-S H Alt-F6
Set inactive time to force user log off Alt-S L Alt-F7
Maintain the Master Password Table Alt-S M Alt-F8
Maintain the User ID Table & passwords Alt-S U Alt-F9
MENU ENTRIES
Add an entry to the User Menu Alt-M A Ins
Change a User Menu entry Alt-M C F2
Duplicate a User Menu entry Alt-M D F4
Erase an entry in the User Menu Alt-M E Del
Move a User Menu entry Alt-M M F6
Switch two User Menu entries Alt-M S F8
Display menu actions in title window Alt-L A Shift-F1
Modify the current menu file's macros Alt-L M Shift-F6
MENU PAGES
Compress a page of menu entries Alt-P C Ctrl-F1
Erase all menu entries on a menu page Alt-P E Ctrl-F2
Import a page from any menu file Alt-P I Ctrl-F3
Change the name of a Page Index Alt-P N Ctrl-F4
Switch two pages in the same menu file Alt-P S Ctrl-F5
Display menu actions in Title Window Alt-L A Shift-F1
CHANGING HDM'S LOOK
Change border line styles on windows Alt-L B Shift-F2
Change screen and window colors Alt-L C Shift-F3
page 101
HARD DISK MENU SYSTEM Version 4.60
Keystrokes Shortcut
========== ========
Change date/Top Menu format Alt-L D Shift-F4
Change the lines placed in User Menu Alt-L L Shift-F5
Change the design of the User Menu Alt-L S Shift-F7
Modify current menu file title lines Alt-L T Shift-F8
Change background wallpaper character Alt-L W Shift-F9
CUSTOMIZING HDM
Modify the current menu file's macros Alt-L M Shift-F6
Change the blinking of the cursor Alt-G B Alt-1
Change the mouse speed Alt-G M Alt-6
Change the project name Alt-G C Alt-2
Set the date/time and their format Alt-G D Alt-3
Set other global settings for HDM Alt-G G Alt-4
Set up execution based on inactive time Alt-G I Alt-5
Set up timed execution of menu entries Alt-G T Alt-9
Specify communication port & dial type Alt-G P Alt-7
Set screen save blank time and message Alt-G S Alt-8
EXITING HDM AND DOS SHELL
Open a DOS window Alt-X D F9
Log user off and return to logo screen Alt-X L F7
Return to previous menu file Alt-X P Esc
Save all changes made in HDM to disk Alt-M W Ctrl-F10
Exit to the DOS prompt Alt-X X F3
REPORTS
Access the HDM Report Module Alt-X R F5
NETWORKS
Set up an execution based on inactivity Alt-G I Alt-5
Log off a user if one was logged on Alt-X L F7
In the next several pages are the main menus available from the
Top Menu and the commands that are underneath them. The
shortcut key for each menu choice is listed in parentheses.
MENU (Alt-M)
Add Entry (Ins): Creates a new menu entry.
Change Entry (F2): Changes the description and menu action of
an entry but not its security level.
page 102
HARD DISK MENU SYSTEM Version 4.60
Duplicate Entry (F4): Copies a menu entry, including its
security level, to an empty entry.
Erase Entry (Del): Deletes a menu entry.
Move Entry (F6): Moves a menu entry to an empty entry, even if
on a different menu page.
Switch Entries (F8): Swaps two entries in the User Menu,
including their security levels.
Write File (Ctrl-F10): Saves all changes made to your disk. Not
normally used since HDM automatically saves changes whenever
you run a menu entry, return to the logo screen, press F1 for
help, or after one minute of keyboard/mouse inactivity. An
asterisk (*) appears in the lower right corner if you have made
changes that have yet to be saved. You can undo the changes
made to the menu before they are written to disk by pressing
Ctrl-U while the asterisk is still displayed at the bottom
right corner of the screen.
PAGE (Alt-P)
Compress Page (Ctrl-F1): Moves all menu entries to the top of
the page, leaving empty ones at the bottom.
Erase Page (Ctrl-F2): Removes all the menu entries in a menu
page that have an equal or lower security level than your user
security level, and optionally allows you to remove those
entries with a higher security level.
Import Page (Ctrl-F3): Imports entries from a page in another
menu file or the current menu file to empty entries in a page
in the current User Menu.
Name Page (Ctrl-F4): Changes the name of a menu page. Use up to
19 characters.
Switch Pages (Ctrl-F5): Switches the menu entries and the page
names of two pages in the current menu file, including their
security levels.
SECURITY (Alt-S)
Set Security (Alt-F1): Changes the security level number of a
single menu entry in the current menu file.
Page Security Level (Alt-F2): Changes the security level number
page 103
HARD DISK MENU SYSTEM Version 4.60
of a single menu page in the current menu file.
All User Menu Entries (Alt-F3): Changes the security level
number of the current menu file. The new number becomes the
default for pages and entries not assigned their own security
level.
File Change Protection (Alt-F4): Adds a security level to
protect the current menu file from being changed, although
users can still run the menu entries. The Menu, Page, Security
and Local menus are controlled by this security command.
Top Menu Entries (All) (Alt-F5): Adds a security level to limit
access to the Top Menu choices (Menu, Page, Security, Local,
Global and Exit). The security level specified by this command
becomes the default for the commands in the pull-down menu. It
can be overridden for an individual pull-down menu command by
placing the cursor on the command and pressing Alt-F1.
Hide/Disable Top Menu (Alt-F6): Hides the Top Menu and its
pull-down menus by disabling the F10 and slash keys. You assign
a security level to limit access. To access the Top Menu when
it's hidden, type "/UNHIDE" while the User Menu is displayed,
then enter a password of a security level equal to or higher
than the hidden menu level.
Log Off Automatically (Alt-F7): Logs a user off, if one was
logged on, after a set amount of time with no keyboard or mouse
activity. You can set the inactive time from zero to 99
minutes. If you set it to zero, there will be no automatic
logoff. You can also have a menu entry automatically run
whether the user logs off manually or has it done automatically
after inactivity. These two activities are independent of each
other. You can have an automatic logoff, an automatic execution
of a menu entry at logoff, or both.
Master Password Table (Alt-F8): Allows you to set up passwords
for any of the 99 security levels. You must create at least one
password in this table to use any security in HDM. Since this
is the center of HDM's security system, you should give it a
high level of security so that others cannot add their own
passwords to the table. First, put a password on a high level
number in the table. Then position the cursor over the "Master
Password Table" command in the "Security" menu and press
Alt-F1. Enter a high security level number in the window that
opens.
User ID Security Table (Alt-F9): Allows you to add, change and
page 104
HARD DISK MENU SYSTEM Version 4.60
delete user account names, user security levels, initial menu
files, initial menu entries and, optionally, to set user
passwords. If any entries are made in the User ID Security
Table, users must log on to HDM with a user name and a matching
password (if set up) before being able to use the menu.
LOCAL (Alt-L)
The commands under this pull-down menu affect how the current
menu file behaves and looks. Choices made here affect the
current menu file only. Other menu files can have different
configurations.
Action Display (Shift-F1): Displays the menu action for the
highlighted menu entry in the title box at the top of the
screen. This choice acts as a toggle; choosing it again returns
the title box to normal.
Border Lines (Shift-F2): Changes the type of border lines used
in all windows in the current menu file. The choices are single
lines, double lines, bold (thick) lines or no lines. This
command affects only the current menu file.
Change Colors (Shift-F3): Changes the colors of HDM for the
current menu file only. Choose from pre-defined color palettes,
specify the color of each component in a palette or restore the
original colors. The components are the foreground color, the
background color, the emphasized color, the window title color
and the window border color.
Date/Top Menu (Shift-F4): Displays the top status bar with the
date and time, the top menu bar or both. This choice acts as a
three-way switch. Each time you choose it, you display the next
of the three choices. This command affects the current menu
file only.
Lines in Menu (Shift-F5): Sets whether lines will be used to
separate the list of Menu Pages and Menu Entries from the
bottom of the windows. This choice acts as a four-way switch.
Each time you choose it, you will display the next set of lines
that can be used. The choices are: no lines inside the boxes, a
line at the top, a line at the bottom, lines at both the top
and the bottom. There are only two configurations if you are
using the shadowed menu (mentioned later): with or without
inside lines.
Menu Macros (Shift-F6): Adds, changes or deletes any of the 10
available macros for the current menu file. Each macro can use
page 105
HARD DISK MENU SYSTEM Version 4.60
up to 255 characters. To delete a macro, press Ctrl-Bksp while
the cursor is in that macro's line. To restore a macro to its
original contents, press Ctrl-U before you leave that field.
Switch Screens (Shift-F7): Changes the positions and look of
the User Menu and the Page Index to one of six combinations.
You have a choice between the standard flat menus and the
shadowed menus. This choice acts as a six-way switch. Each time
you choose it, you will display the next set of menu layout.
Top Box Titles (Shift-F8): Adds, changes or deletes any of the
four available title lines in the current menu file. These
title lines are displayed in the title box at the top of the
screen. One, two, three or four of the lines will display
depending on the Date/Time and Top Menu configuration and the
type of User Menu screen used.
Wallpaper (Shift-F9): Changes the character used in the
background of most HDM screens for the current menu file. The
default wallpaper character is ASCII 176 (a shaded character).
GLOBAL (Alt-G)
The following choices affect ALL menu files (HDM.000 through
HDM.999).
Blinking Cursor (Alt-1): Changes the rate of blinking for the
cursor in all menu files. Enter a number from zero to 99, where
the lower the number the slower the rate. If you enter zero,
the cursor will not blink. Press F2 to save the new rate or
press Esc to cancel the change.
Change Project (Alt-2): Starts, changes or removes a project
number or project name. This data is used by the {PROJECT}
function in a menu action or in the title, and recorded in the
HDM log file.
Date and Time (Alt-3): Sets the system's date and time as well
as format. The date format can be set to American (MM/DD/YY) or
European (DD/MM/YY). The time can be set to a standard 12-hour
or military 24-hour clock.
Global Settings (Alt-4): Change the following Yes/No settings:
* Ask for confirmation when exiting to DOS using F3.
* Hide empty menu pages in the Page Index.
* Hide empty menu entries in the User Menu.
* Wrap to the same page when using the cursor.
page 106
HARD DISK MENU SYSTEM Version 4.60
* Ask for the project name when starting HDM.
Inactive Execution (Alt-5): Automatically runs a menu entry
from any menu file in HDM after a set amount of keyboard and
mouse inactivity. Once the automatic execution warning window
is displayed, you will have 15 seconds to cancel the running of
this entry. Otherwise, this entry will run as scheduled.
Mouse Speed (Alt-6): Changes the horizontal and vertical motion
sensitivity of the mouse. Enter a number from zero to 99 for
each. The lower numbers are a slower rate of speed while the
higher numbers are a faster rate of speed.
Phone Parameters (Alt-7): Sets the dial type (tone or pulse),
communication port (COM1 through COM4) and the interrupt (IRQ)
for your modem. This information is used by the {DIAL} function.
Screen Blanker (Alt-8): Changes the number of minutes of
inactivity before the screen is blanked out. This prevents the
images of your screen from "burning" into the phosphor of your
monitor after long periods of time. Optionally, you can enter a
message to be displayed in various positions on the screen to
remind you that HDM blanked out the screen. When the screen is
blanked out, you can press any key to restore it to the
previous display. You can blank the screen out any time you
choose without waiting for the time you set by pressing Ctrl-B.
Timed Execution (Alt-9): Automatically runs a menu entry based
on the day of the week or month and the time of day. For the
menu entry to be run, you must be in HDM at the time. You will
have 15 seconds to cancel the running of the entry once the
timed execution warning window is displayed. Otherwise it will
run as scheduled.
EXIT (Alt-X)
DOS Window (F9): Allows you to open a DOS window where you can
run any DOS command or program up to 128 characters. You can
also use HDM macros and functions. You can press F4 to search
for and pick an executable file. The DOS window remembers the
last 9 commands so you can repeat them. To enter a new command,
just type over the current one in the top line. Press Ctrl-U
to restore the original command.
Log Off (F7): Logs off a user if one was logged on and displays
the logo screen. Logging off this way automatically runs the
menu entry specified in the "Log Off Automatically" choice in
the Security menu, if any was created.
page 107
HARD DISK MENU SYSTEM Version 4.60
Prior Menu (Esc): Returns you to the previous menu file or pops
up a window to let you know there were no previous menu files.
You must have used the {MENU} action function to go to another
menu file. This command is similar to the {RETURN} function.
Reports (F5): Starts the Report Module for analyzing HDM usage.
Exit HDM (F3): Exits you from HDM to the DOS prompt. The screen
is cleared and the DOS prompt is displayed. You can do whatever
you want while in DOS. When you then want to return to HDM,
type "X" and then press Enter. You will return to HDM at the
location where you left it.
NOTE: The X key used to return to HDM can be changed to any
other name not already used by HDM, DOS or another program.
To change it, use the "SET X=" environment variable in your
AUTOEXEC.BAT file before HDM is started. See the chapter
"Customizing HDM" for more information.
page 108
HARD DISK MENU SYSTEM Version 4.60
APPENDIX A: OVERVIEW OF DOS
Now that you're using a computer, you've probably heard the
term DOS. But what is DOS and what does it do?
DOS stands for Disk Operating System. It is a software program
that speaks directly to the computer hardware. There are many
varieties of DOS, but they all use the same basic commands and
perform the same functions. MS-DOS is Microsoft Corporation's
version of DOS. The IBM version is commonly called PC-DOS. Also,
Novell now has Digital Research's DR-DOS.
The primary function of DOS is to be an intermediary between
the computer hardware and your programs (word processor,
spreadsheet, and database programs). Like a foreign language
interpreter, DOS allows the computer to understand and start
your programs, each of which may be written in a different
computer language. DOS also allows you to manage files and
subdirectories on your hard disk, including copying, deleting
and moving.
POPULAR TERMS
Here are some basic terms you should be familiar with before
using HDM:
FILE: The basic unit of organization. A file is like a piece of
paper stored in your computer. It can contain one of two
things: a series of instructions (a program file), or words or
numbers (data file).
DIRECTORY: A way of organizing files. DOS comes with a root
(main) directory but allows users to create other directories
and to organize them into a logical hierarchy.
SUBDIRECTORY: A directory that is underneath another directory,
like a drawer within a filing cabinet. For example, all
directories you create are subdirectories of the root
directory. Like a filing cabinet, subdirectories and
directories contain similar files together so you can easily
find them. For example, all your letters could be saved in a
directory called C:\LETTERS.
PROGRAM: A series of instructions that tells your computer what
to do, such as add a column of numbers or find a customer's
invoice number. Of course, you control the program and tell it
what to do.
page 109
HARD DISK MENU SYSTEM Version 4.60
DISK: A place to store files. Disk storage consists of hard
disks and floppy diskettes.
HARD DISK: A physical disk inside your computer on which files
and subdirectories are stored. A hard disk looks and works a
bit like a record; it has cylindrical grooves and a head
(needle) that reads information from between the grooves. A
hard disk can be considered a large file cabinet in which you
store your folders (subdirectories) and files (papers). A hard
disk is sometimes called internal storage.
DISKETTE: A miniature, portable disk. You use diskettes to copy
programs or data files onto your hard disk and to store backup
or extra copies of program and data files that already exist on
your hard disk. Diskettes are read by inserting them into a
disk drive located in your computer. Diskettes and disk drives
come in two sizes: 3.5 inches and 5.25 inches.
DOS: FROM THE COMMAND LINE
Native DOS uses a command level interface; when you start your
computer, the screen is blank except for the DOS command line,
where you type commands that tell DOS what you'd like it to do.
It looks like this:
C:\> or C:\WP\LET> or C:\DBASE\WIDGET\MAR\EAST>
The symbols and letters mean something to DOS but may be
unfamiliar to you. Typing the commands that tell DOS what you'd
like it to do can be just as cryptic. For example, here is a
simple command that tells DOS to start the program Word Perfect:
CD \WP (press Enter)
WP (press Enter)
Here's a DOS command that simply copies a file from one
subdirectory to another and verifies the copying went smoothly:
COPY C:\WP\LET\PCR\WORD.REV C:\WP\MISC\ /V (Enter)
To use the DOS interface, you have to "speak" the DOS language
and use it correctly. The Hard Disk Menu System was created to
help you use DOS without having to speak its complex language.
Like a restaurant menu, HDM gives you a way to quickly choose
what you want to do with your computer. HDM bypasses DOS and
its hard-to-understand commands so computing is enjoyable and
useful. Once set up, HDM lets you start programs and organize
your files with a press of one or two keys.
page 110
HARD DISK MENU SYSTEM Version 4.60
APPENDIX B: IMPORTANT TABLES
Below are the major tables for HDM.
HDM KEYSTROKES AND KEY COMBINATIONS
Below are the keys used in the User Menu (main HDM menu), Top Menu
(and its pull-down menus), and windows in which you enter values,
such as when creating a menu entry.
Keys User Menu Top Menu Window
============== ==================== ============== =========
Enter Starts selected item (Ditto) Accepts
changes
for current
line
Spacebar Moves cursor to (Ditto) Inserts or
next item overwrites
individual
characters
Right Arrow Moves cursor to Moves cursor Moves cursor
first entry on to next pull- one character
next menu page down menu right
Left Arrow Moves cursor to Moves cursor Moves cursor
last entry on to previous one character
prior menu page pull-down menu left
Tab Moves cursor (Ditto) Moves
to next item cursor
eight
characters
right
Shift-Tab Moves cursor to (Ditto) Moves
previous item cursor
eight
characters
left
Down Arrow Moves cursor to (Ditto) Moves
next item cursor
to next
line
page 111
HARD DISK MENU SYSTEM Version 4.60
Keys User Menu Top Menu Window
============== ==================== ============== =========
Up Arrow Moves cursor to (Ditto) Moves
previous item cursor
to
previous
line on
screen
Backspace Moves cursor to (Ditto) Deletes
previous item character
to left
of cursor
Ctrl-Backspace Deletes all
characters
in line
Ctrl-Home Deletes
characters
from cursor
to beginning
of line
Ctrl-End Deletes
characters
from cursor
to end of
line
Page Up Moves cursor to Moves cursor Moves cursor
previous menu page to previous to first
menu choice line
Page Down Moves cursor to Moves cursor Moves cursor
next menu page to next menu to last
choice line
Ctrl-PgDn Moves cursor down
about eight menu pages
Ctrl-PgUp Moves cursor up
about eight menu pages
Delete (Del) Deletes a single menu entry Deletes
character
at cursor
page 112
HARD DISK MENU SYSTEM Version 4.60
Keys User Menu Top Menu Window
============== ==================== ============== =========
Insert (Ins) Adds a single menu Switches
entry between
Insert and
Overwrite
mode (default
is Insert)
Home or Minus Moves cursor to first Moves cursor Home moves
menu entry of to first pull- cursor to
all menu pages down menu first
character
in field
End or Plus Moves cursor to last Moves cursor End moves
menu entry of to last pull- cursor to
all menu pages down menu last
character
in field
Escape (Esc) Returns to previous Returns to Closes
Ctrl-C menu file, if any User Menu current
Ctrl-Break window
and
cancels
changes
Alt-F1 Changes security of Changes Changes
a single menu entry security of security
current of a
pull-down menu single
choice menu
entry
Alt-F2 Changes security of a menu page
Alt-F3 Changes security of all menu entries in menu file
Alt-F4 Prevents changes to current menu file
Alt-F5 Prevents access to Top Menu pull-down menus
Alt-F6 Hides the Top Menu and its pull-down menus
Alt-F7 Creates automatic logoff and menu entry execution
Alt-F8 Opens Master Password Table
page 113
HARD DISK MENU SYSTEM Version 4.60
Keys User Menu Top Menu Window
============== ==================== ============== =========
Alt-F9 Opens the User ID Security Table
Alt-F10 Opens last-used Returns to Opens last
pull-down menu User Menu used
pull-down
menu
Letter keys Moves to first menu entry of same Opens
lettered menu page pull-down
menu of
same
highlighted
letter
Number keys Starts the same numbered menu entry of
current menu page
F1 Displays Help menu
F2 Edits a single menu (Ditto) Saves
entry changes
F3 Exits from HDM
F4 Copies a single (Ditto) If add/chg
menu entry menu entry,
Auto-builds
menu action
F5 Opens Report Module
F6 Moves a single menu entry
F7 Logs user off HDM & Displays logo screen
F8 Swaps two menu entries
F9 Opens DOS window to run a DOS command or program
F10 Opens Top Menu Returns to Opens Top
User Menu Menu
Slash (/) Opens Top Menu
Backslash (\) Opens last used pull-down menu
/UNHIDE Allows access to Top Menu although hidden
page 114
HARD DISK MENU SYSTEM Version 4.60
Keys User Menu Top Menu Window
============== ==================== ============== =========
Ctrl-B Immediately blanks the screen
Ctrl-F Immediately freezes screen
Ctrl-U Undoes menu changes since last save Undoes
changes to
current line
Ctrl-F1 Compresses a page of menu entries
Ctrl-F2 Erases a page of menu entries
Ctrl-F3 Imports a page of menu entries
Ctrl-F4 Changes name of a menu page
Ctrl-F5 Switches two User Menu pages
Ctrl-F10 Writes changes to menu file
Shift-F1 Displays current menu action in Title Box
Shift-F2 Changes window border lines in current menu file
Shift-F3 Changes colors in current menu file
Shift-F4 Displays variations of date/time line and Top Menu
Shift-F5 Changes number of lines in the User Menu
Shift-F6 Creates or changes macros in current menu file
Shift-F7 Changes menu design of HDM
Shift-F8 Changes text in Title Box
Shift-F9 Changes character for background wallpaper
Alt-1 Changes cursor blinking rate
Alt-2 Changes project name
Alt-3 Changes date/time and its format
Alt-4 Changes various global settings
Alt-5 Creates or changes Inactive Execution
page 115
HARD DISK MENU SYSTEM Version 4.60
Alt-6 Changes mouse speed
Alt-7 Changes phone dialer's settings
Alt-8 Creates or changes screen blanker settings
Alt-9 Creates or changes Timed Execution
Alt-M Opens the Menu pull-down menu
Alt-P Opens the Page pull-down menu
Alt-S Opens the Security pull-down menu
Alt-L Opens the Local pull-down menu
Alt-G Opens the Global pull-down menu
Alt-X Opens the Exit pull-down menu
STARTUP SWITCHES
If the last line of your AUTOEXEC.BAT startup file contains just
"HDM" or if you simply type "HDM" to start HDM, you are using the
basic HDM system. To use some advanced features or to customize
HDM upon starting the program, you have two choices:
* Add extra parameters (or switches) after the HDM command.
* Use DOS environment variables in your AUTOEXEC.BAT file.
AFTER THE HDM COMMAND
By entering parameters (switches) after "HDM" in your AUTOEXEC.BAT
file, you can customize HDM. Below is a template for the various
commands available:
HDM -switch1 -switch2 ... etc.
where "switch1," "switch2," etc. is a combination of the switches.
When done, your AUTOEXEC.BAT file may look like this:
ECHO OFF
PROMPT $P$G
PATH C:\HDM
CD \HDM
HDM -CC:\BACKUP -EC:\UTIL -GC:\DATA -TC:\DATA -WC:\TEMP
page 116
HARD DISK MENU SYSTEM Version 4.60
Each parameter you add should be separated by a blank space.
Optional parameters are shown with brackets. When typing these
parameters, omit the brackets.
NOTE: In the following startup switches, "path" must include
the drive letter. For example: C:\DIR\SUBDIR.
Below are the switches from which you can choose:
Switch Purpose
====== ========================================================
-A Automatically runs the selection specified by -Bp#.
-Bp# Specifies entry to highlight in the User Menu. (p# is
A1 through Z0).
-Cpath Specifies path where a backup copy of the menu file
is kept.
-Ddrive Displays free disk space for the specified drive (-DC
shows free space on C:).
-Epath Exits to this path when you press F3 to exit to DOS.
-Gpath Specifies global path to the configuration file
HDM.CFG. This file contains the global settings for
all menu files.
-H[path] Reads header/logo screen from the HDM.HDR file in the
HDM directory or in [path]. [path] is optional.
-I Intensifies the background colors by allowing all 16
colors. The last 8 background colors become bright
versions of the first 8 (for color monitors). This
may not work with some video hardware.
-K Disables key lock status from being displayed and the
date and time from being constantly updated. Used to
eliminate video bleed-through on multitasking systems.
-L[path] Logs usage to the HDM.LOG file in the HDM directory
or in [path]. [path] is optional.
-M### Specifies menu file to be used when HDM is started,
where "###" is any number from 0 through 999.
-O Turns off the NumLock key when HDM starts.
page 117
HARD DISK MENU SYSTEM Version 4.60
Switch Purpose
====== ========================================================
-N Disables logo screen from being displayed when HDM is
started. If a user logon is required, HDM goes
directly to the logon window.
-Q Queues keystrokes in the DOS keyboard buffer when HDM
starts or after returning from running a program.
Normally, HDM clears any keystrokes so its operation
is not affected.
-S Sets screen border on color monitors. The border will
match the background color of the Status Bar. This
may not work well with some EGA video cards.
-Tpath Specifies the path where the menu entries and
variables are stored. (HDM.000 to HDM.999, see -0 to
-9 also)
-Uname Reads a user ID from the named DOS environment
variable to automate the user logon procedure.
-VF Sets fast screen output for snow-less video boards.
This parameter prevents HDM from waiting for your
video card. This is the default except with CGA video
systems.
-VM Sets video mode to monochrome (black and white). Use
this parameter to correct the problem of unreadable
screens on laptops, portables and similar computers.
-VS Stops static (snow) from displaying on the screen by
waiting for your video card to draw the screen. This
is the default for CGA computers.
-Wpath Specifies work path where the temporary work file is
stored. This work path must be in the DOS path
statement in AUTOEXEC.BAT.
-#path Similar to -T except this parameter specifies the
path to each group of 100 menu files. -# is a number
from -0 to -9. (-7 is for HDM.700-799).
DOS ENVIRONMENT VARIABLES
Instead of typing switches after "HDM," you can use a DOS
environment variable to customize the program. This SET command
must be in the AUTOEXEC.BAT file before starting HDM.
page 118
HARD DISK MENU SYSTEM Version 4.60
Below is a template for the various commands available:
SET HDM=-variable1 -variable2 ... etc.
where "variable1," "variable2," etc., is any of the switches
mentioned in the previous section.
PICKING COLORS
The {COLOR} function lets you change the foreground and
background colors for the current menu entry's DOS screen.
These are the available colors:
Color Number
============= ======
Black 0
Blue 1
Green 2
Cyan 3
Red 4
Magenta 5
Brown 6
Light gray 7
Dark gray 8
Light blue 9
Light green 10
Light cyan 11
Light red 12
Light magenta 13
Yellow 14
White 15
CHOICES FOR THE {KEY} FUNCTION
The {KEY} function lets you pass up to 15 keys to a program that
uses the standard DOS keyboard buffer. The following chart shows
what codes to use for various keystrokes.
Keystrokes Code Keystrokes Code Keystrokes Code
========== ==== ========== ==== ========== ====
Ctrl-A CA Ctrl-B CB Ctrl-C CC
Ctrl-D CD Ctrl-E CE Ctrl-F CF
Ctrl-G CG Ctrl-H CH Ctrl-I CI
Ctrl-J CJ Ctrl-K CK Ctrl-L CL
Ctrl-M CM Ctrl-N CN Ctrl-O CO
Ctrl-P CP Ctrl-Q CQ Ctrl-R CR
Ctrl-S CS Ctrl-T CT Ctrl-U CU
Ctrl-V CV Ctrl-W CW Ctrl-X CX
page 119
HARD DISK MENU SYSTEM Version 4.60
Keystrokes Code Keystrokes Code Keystrokes Code
========== ==== ========== ==== ========== ====
Ctrl-Y CY Ctrl-Z CZ Space SP
Ctrl-[ C[ Ctrl-] C] Ctrl-\ C\
Ctrl-2 C2 Ctrl-6 C6 Ctrl-- C-
Enter ENTR Escape ESC Ctrl-Break CBRK
Backspace BSP Ctrl-BkSpc CBSP Tab TAB
Shift-Tab STAB Alt-A AA Alt-B AB
Alt-C AC Alt-D AD Alt-E AE
Alt-F AF Alt-G AG Alt-H AH
Alt-I AI Alt-J AJ Alt-K AK
Alt-L AL Alt-M AM Alt-N AN
Alt-O AO Alt-P AP Alt-Q AQ
Alt-R AR Alt-S AS Alt-T AT
Alt-U AU Alt-V AV Alt-W AW
Alt-X AX Alt-Y AY Alt-Z AZ
F1 F1 F2 F2 F3 F3
F4 F4 F5 F5 F4 F4
F7 F7 F8 F8 F9 F9
F10 F10 F11 F11 F12 F12
Alt-F1 AF1 Alt-F2 AF2 Alt-F3 AF3
Alt-F4 AF4 Alt-F5 AF5 Alt-F6 AF6
Alt-F7 AF7 Alt-F8 AF8 Alt-F9 AF9
Alt-F10 AF10 Alt-F11 AF11 Alt-F12 AF12
Ctrl-F1 CF1 Ctrl-F2 CF2 Ctrl-F3 CF3
Ctrl-F4 CF4 Ctrl-F5 CF5 Ctrl-F6 CF6
Ctrl-F7 CF7 Ctrl-F8 CF8 Ctrl-F9 CF9
Ctrl-F10 CF10 Ctrl-F11 CF11 Ctrl-F12 CF12
Shift-F1 SF1 Shift-F2 SF2 Shift-F3 SF3
Shift-F4 SF4 Shift-F5 SF5 Shift-F6 SF6
Shift-F7 SF7 Shift-F8 SF8 Shift-F9 SF9
Shift-F10 SF10 Shift-F11 SF11 Shift-F12 SF12
Left Arrow LAR Right Arrow RAR Up Arrow UAR
Ctrl-Left CLAR Ctrl-Right CRAR Down Arrow DAR
Arrow Arrow
Home HOM End END Insert INS
Ctrl-Home CHOM Ctrl-End CEND Delete DEL
PgUp PGU PgDn PGD Ctrl-PrtSc CPRT
Ctrl-PgUp CPGU Ctrl-PgDn CPGD
Alt-1 A1 Alt-2 A2 Alt-3 A3
Alt-4 A4 Alt-5 A5 Alt-6 A6
Alt-7 A7 Alt-8 A8 Alt-9 A9
Alt-0 A0 Alt- A- Alt-= A=
page 120
HARD DISK MENU SYSTEM Version 4.60
APPENDIX C: COMMON QUESTIONS AND ANSWERS
Q: What language was the Hard Disk Menu System written in?
A: Turbo Pascal and Assembler.
Q: After I run a batch file from a menu selection, I get a DOS
prompt instead of returning to HDM. What's wrong?
A: When running your batch file, DOS does not automatically
return from the calling batch file (X.BAT created by HDM).
You can remedy this situation by using @@ in front of your
batch file name. The @@ is changed to CALL for DOS 3.30 and
above, or to 4DOS or COMMAND /C for earlier versions. If DW5
is a batch file and your entry was:
CD\DSPWRITE~DW5~
change it to:
CD\DSPWRITE~@@DW5~
Q: When I try to run a batch file, I get a "Bad command or file
name" message from DOS, then I go right back to the menu. I
checked the batch file name, and it has the @@ in front of
it and it's in the directory that I go to in my menu action.
Why doesn't it work?
A: You are running a version of DOS prior to 3.00 and HDM is
trying to run your batch file with COMMAND.COM. DOS can't
locate COMMAND.COM, not your batch file. Make sure that the
root or DOS directory, where COMMAND.COM should be located,
is in your DOS path so that it is always accessible. Here is
an example of an AUTOEXEC.BAT:
PROMPT $P$G
PATH C:\;C:\HDM;C:\DOS
CD\HDM
HDM
Q: When I exit from HDM by pressing F3 and then type X at the
DOS prompt to return to HDM, I get a "Bad command or file
name" message. Why does this happen?
A: This happens because DOS cannot find the file that HDM wrote
called X.BAT. DOS must locate this file through the DOS path.
Make sure you set up the proper PATH in your AUTOEXEC.BAT
before starting HDM. The path must include the HDM directory;
or, if you used the -W switch when starting HDM, the work
directory. Here is an example using a work directory:
page 121
HARD DISK MENU SYSTEM Version 4.60
PROMPT $P$G
PATH C:\;D:\WORKDIR;C:\DOS
CD \HDM
HDM -WD:\WORKDIR
Q: Some DOS commands work fine from HDM while others give me a
message that says "Bad Command or File Name". What should I
do to fix the problem?
A: The DOS commands that work are probably the internal commands.
The system can't find the external DOS commands. See your DOS
manual to see which are internal and which are external. The
solution is a path command that points to the DOS files. Add
the DOS directory to your AUTOEXEC.BAT file as shown in the
previous two examples.
Q: We run HDM on a Novell network with the HDM program on the
server. When a user returns to the menu from a program,
strange things happen. Sometimes we get "Batch file missing"
and remain at the DOS prompt. Sometimes there will be a lot
of "Bad command or file name" messages in a row before
returning to HDM. In other cases, a user will return, but
will be in another user's menu. We use the -T switch to
point to each user's unique menu file. What's going on?
A: The temporary work file called X.BAT is being overwritten by
other users when they run menu entries. The HDM directory on
the server is the default work directory for X.BAT. Each user
must write the work file to a unique read/write directory
because it cannot be shared unless the "SET X=" environment
variable is used. Use the -W switch to point to a different
work directory for each user or use "SET X=" to rename the
working batch file. Here is a startup example:
CD \HDM
HDM -TH:\MENUTEXT -WC:\MYOWNDIR
Q: If I start a program or batch file from the menu and it runs
for a long time and I didn't really want to run it, can I
abort it and get right back to HDM?
A: DOS will let you cancel a batch file by pressing Ctrl-Break.
When you do cancel it you will end up at the DOS prompt, just
type X and press Enter. You'll be back where you were in HDM.
Q: HDM version III let me put a password on just one of the top
menu commands instead of all of them at once, I don't see
anything in the Security menu that will let me do that in HDM.
A: You're right. There is nothing in the Security menu to
accomplish that, but it still can be done. Make sure you have
page 122
HARD DISK MENU SYSTEM Version 4.60
at least one password set in the Master Password Table. Then
put the cursor on the command in the menu that you want to
protect and press Alt-F1. You can then type a security level
number that affects just that one command.
Q: How can I password protect the F3 key so you can't access
DOS?
A: The answer is really the same as the previous answer because
F3 is just a short cut to the "Exit HDM" entry in the Exit
menu. Press Alt-X, move the cursor down to "Exit HDM", then
press Alt-F1. Enter a security level number that is higher
than the level of the users you want to keep from going to
DOS. Make sure you have a password set on that level or
higher in the Master Password Table. Now both F3 and the
"Exit HDM" menu command are protected.
Q: We run 3270 emulation on our PC to connect to our company's
mainframe. When we hot key over to the mainframe side, the
key lock status, date and time, and the cursor from HDM bleed
through to our mainframe application. How can we stop this?
A: This happens because HDM continually writes those items out
to the screen as it's waiting for keyboard or mouse entry.
Use the -K startup switch and the key locks will not be
displayed, and the date and time will be updated only when
a key is pressed or the mouse is used. Also, set the blinking
cursor speed to zero to eliminate the writes to the screen a
blinking cursor requires.
Q: I have a Hercules-compatible video card and I'm having a
problem with my cursor. When I go into WordPerfect the cursor
shows right in the middle of a character instead of below it.
This makes it difficult to see the cursor. What can I do?
A: This seems to be a problem with some Hercules clones and
certain PC programs. HDM itself does not change the cursor,
it saves the prior cursor settings and uses its own cursor
settings. When it runs another program, HDM restores the
cursor to its saved shape and size. You can fix the problem
by using one of HDM's built-in functions. The {CURSOR}
function can set the cursor to the way you want it to look:
{CURSOR 12 13}C:~CD\WP60~WP~
Q: I need to pass a parameter to WordPerfect that includes the
left brace character. When I include it in the menu action
and try to run it, I get a message that says unbalanced
braces and it aborts. What can I do to get this to work?
A: The braces are reserved by HDM to identify its functions.
HDM checks to make sure they're used in pairs. To pass a
page 123
HARD DISK MENU SYSTEM Version 4.60
single brace, use these substitute characters: Ctrl-Q for
the left brace; and, Ctrl-P for the right brace. The other
problem character is the tilde (~) since it's used as a
command separator. Use Ctrl-Z if you need that character
in a command or program.
Q: A user who logs on to HDM is automatically logged in to our
network because we include the network login entry in the
User ID Security Table. Is there a way to automatically log
users out of the network when they log off of HDM?
A: Yes, there is. In the "Log Off Automatically" command in the
Security menu, you can enter a menu file number and a menu
entry's page and number. This entry automatically runs when
the user logs off HDM.
Q: The Timed Execution Facility works great-except if you're on
a network. We have a tape backup that we want to run from the
server at two o'clock in the morning, Monday through Friday,
but all the computers on the network try to run it. Since the
Timed Execution is a global table, how can we get just the
server to run it?
A: The easiest way is to use the {CK} function to verify a
drive that only the server has access to, like this:
{CK T}TBACKUP C:~
When the other computers on the network hit the {CK T}, the
menu action will be canceled for them.
A second way is to set an environment variable on the server:
SET TAPEBACKUP=TBACKUP C:~
Then use this menu action:
{%TAPEBACKUP%}
which will be replaced on the server by TBACKUP C:~ and will
become empty on all the others so that nothing will run. A
third way is to run a menu action like this:
{MENU 400}{KEY Z 7}
and use the -4 startup switch so that the server will run
menu entry Z7 from a different menu file than all the others.
page 124
HARD DISK MENU SYSTEM Version 4.60
APPENDIX D: ERROR MESSAGES
000 ERROR LOCATING THE HDM STARTUP DIRECTORY: HDM could not
find itself in the starting directory. Check that you are in
the directory that contains HDM before you start it. Also check
if the HDM4.EXE file has been renamed.
010 ERROR OPENING "File": HDM could not find the specified file
in the expected directory or received an error from DOS while
trying to open it. Check that the specified directories
actually exist.
020 ERROR READING "File": HDM received an error from DOS while
reading the specified file from the directory in which it was
opened. This may be a result of trying to read a bad sector on
your disk.
030 ERROR WRITING "File": HDM received an error from DOS while
writing the specified file to a directory. The disk could be
full or the file could be set to "read-only."
040 ERROR CLOSING "File": HDM received an error from DOS while
attempting to close the specified file.
050 CAN'T FIND "Path": HDM could not find the path on the
specified disk drive or a {DIR} or {FILE} function has an
invalid path. Check that all the directories exist.
055 CAN'T ACCESS "Disk Drive": HDM could not access the drive
specified in the {CK} function or the drive for a needed file,
or a {DIR} or {FILE} menu function is referring to an invalid
drive.
064 EXCEEDED MAXIMUM NUMBER OF INPUT FIELDS: HDM allows up to
64 active input fields at a time. This could be an internal
program error. Contact MicroFox Company.
088 EXCEEDED MAXIMUM NUMBER OF NESTED READS: HDM can handle up
to eight windows with active input fields at a time. This could
be an internal program error. Contact MicroFox Company.
099 DOS ERROR (#) RUNNING AN INTERNAL PROGRAM: This can result
from HDM not being able to find its Help, List or Dial program.
It can also happen when running your own programs internally
using the {RUN} function or the {RUN!} function. Either the
program couldn't be found or there was not enough memory to
keep HDM in memory while running the program.
page 125
HARD DISK MENU SYSTEM Version 4.60
101 NO LOG FILE OPEN: Before you can print or display a report,
you must first select a log file. Select "Open File" from the
File menu (Alt-F1) and select a log file to open, such as
HDM.LOG.
103 NO RECORDS MATCH THE CRITERIA: No records in the log file
remained after your filter criteria were used. Your previous
records are intact; press F2 and change your filter request.
117 FIELDS NOT DEFINED, CREATE A REPORT FORMAT FIRST: In the
HDM report module, you must select the fields you want to
display in the report. From the report menu, select Create
Report (Ctrl-F1) and select the fields you want included.
310 WRONG PASSWORD!: You entered the wrong password for a user
ID logon or an invalid security level password.
322 UNKNOWN USER!: You tried to log on with a User ID that was
not found in the User ID Security Table.
333 ALREADY AT MAXIMUM NUMBER OF RECORDS!: The User ID Security
Table or the Timed Execution Facility Table is full. HDM has a
maximum of 254 Users and 99 Timed Executions.
590 NUMBER TO DIAL EXCEEDS 36 CHARACTERS!: The {DIAL} phone
number function is limited to 36 characters.
595 - COMMAND # - "MODEM RESPONSE MESSAGE" (ERROR #): The
{DIAL} function tried to send the modem a command and received
a modem error; or HDM could not open a COM# port.
599 PICK UP PHONE, THEN PRESS A KEY!: This message is displayed
after the dialing sequence is sent to your modem from the
{DIAL} function. Pick up the telephone to talk to the person
you called, then press any key. The modem is disconnected from
the phone line and you can continue with your phone
conversation.
661 CAN'T READ MENU FILE HDM.???: HDM could not find the
HDM.000 through HDM.999 file in the current directory, the -T
specified directory, or the -0 through -9 specified directory.
675 FILE NEEDED IS NOT IN HDM DIRECTORY: HDM uses external
files for the phone dialer, help and reports. HDM looks for
these in the HDM program directory, but couldn't find the one
it needed.
page 126
HARD DISK MENU SYSTEM Version 4.60
688 OLD FORMAT MENU FILE!: This happens only when trying to
import a page from a previous version's menu file. To fix this,
read in the old menu file using the {MENU} action function,
make any change to it, then press Esc to return to the menu
file you were using.
696 NO CHANGES MADE OR THEY WERE ALREADY SAVED: Ctrl-U was
pressed from the menu to undo the last changes, but either no
changes were made or they were already written to disk. If an
asterisk (*) is displayed at the bottom right of the screen,
you have changes that can be undone.
700 WINDOW MEMORY UNDERFLOW!: HDM tried to close more windows
than were opened on the screen. This is an internal program
error. Contact MicroFox Company.
716 WINDOW MEMORY OVERFLOW!: HDM allows up to 16 active windows
at one time. This is an internal program error. Contact
MicroFox Company.
732 EXCEEDED MAXIMUM NUMBER OF MOUSE HOT SPOTS!: HDM allows up
to 32 active mouse hot spots at one time. This is an internal
program error. Contact MicroFox Company.
755 INVALID DATE: You tried to change the date through "Date
and Time" in the Global menu but it was incorrect.
757 INVALID TIME: You tried to change the time through "Date
and Time" in the Global menu, but the time was incorrect.
777 CANNOT CHANGE COLORS ON A MONOCHROME MONITOR!: You have a
monochrome monitor or you started HDM with the -VM switch to
force monochrome mode because of an unreadable screen.
799 OUT OF MEMORY: HDM requires at least 300K of memory. If you
have more than this, then there is another kind of error.
Contact MicroFox Company.
834 PAGE LETTER NOT A - Z!: The imported page letter must be in
the A through Z range.
848 AN AUTO-EXECUTION TRIED TO RUN AN EMPTY ENTRY: An automatic
running was attempted through the -A startup switch, automatic
log off, inactive execution, timed execution or the auto
execute field in the User ID Security Table. However, the entry
was empty.
888 NO SECURITY HIGH ENOUGH TO GET TO THE MASTER PASSWORD TABLE:
You tried to delete a security level, but it would not leave a
level high enough to return to the Master Password Table. First
set security codes in HDM to zero before deleting any passwords.
page 127
HARD DISK MENU SYSTEM Version 4.60
890 YOU MUST FIRST SET A PASSWORD IN THE MASTER PASSWORD TABLE:
You can not enter a security code on anything in HDM until that
security code number or a higher one has a password associated
with it. Do this from the Security menu's Master Password Table.
909 MENU ACTION EXCEEDS 255 CHARACTERS!: The menu action length
limit was exceeded because the expansion of function, a macro
or a parameter caused it to be greater than 255. Use the ||
function to continue to another menu entry.
951 CANCELED, UNBALANCED {BRACES} IN ACTION TEXT!: The
execution of the menu action was stopped when the number of
left and right braces didn't match.
953 CANCELED, &MACRO CALLS ITSELF!: The execution of the menu
action was stopped because the macro called itself and would
have resulted in a loop.
954 CANCELED, %PARAMETER CALLS ITSELF!: The execution of the
menu action was stopped because the macro parameter called
itself and would have resulted in a loop.
page 128
HARD DISK MENU SYSTEM Version 4.60
APPENDIX E: TECHNICAL SUPPORT
If you have purchased a license to use the Hard Disk Menu
System, you are eligible to receive technical support by
telephone. Before contacting MicroFox Company, please first
look at the Table of Contents and the "Common Questions and
Answers" appendix in this manual. Your question may already
be answered there. If not, please call 1-216-659-9489 Monday
through Friday, from 10 am to 6 pm eastern (USA) time zone.
Ask for HDM technical support.
All users can get support for HDM through CompuServe. Just send
electronic mail with your questions to Jim Hass at 73057,3113.
You can also write to:
MicroFox Company
PO Box 447
Richfield OH 44286-0447
USA
PROGRAM DISTRIBUTION
HDM is user supported. This means that you may copy it freely
and give the copies away to anyone you wish. They are in turn
requested to send in the registration if they decide to use it.
You can help us distribute HDM to others who might find it
useful by uploading it local BBSs and by giving copies of it
to friends, user groups, and business associates.
Thank you for supporting the Hard Disk Menu and Shareware.
HDM UPDATES
Check the date on the title page of this manual. If it is more
than one year old, contact MicroFox for an updated version of
the Hard Disk Menu. We are constantly improving the program and
put out a major upgrade at least once a year.
page 129
HARD DISK MENU SYSTEM Version 4.60
APPENDIX F: NEW FEATURES
This version of HDM has some new features not available in
previous versions. Below is a list of recent enhancements.
* The HDM install program has been changed to be able to copy
read-only files so it can be installed from a LAN server.
* When HDM asks for a password, it now displays additional
information about the password needed. Also, it now prevents
you from locking youself out of the Master Password Table.
NEW AND IMPROVED FUNCTIONS
* The {CONFIRM} function has been enhanced to optionally add a
time delay and a default action when that time has expired.
If a delay is not included the function will work as before.
* The {DEFAULT} and {?Prompt} input fields have been increased
to 128 characters.
* The {DELAY #} pauses for a number of seconds before continuing
with the rest of the menu action. You can short-cut the delay
by pressing Enter.
* The {DIAL} function has been improved to work with all Hayes
compatible modems. You can change the interrupt (IRQ) for the
communications port and cancel dialing at any time. All dialed
numbers are recorded in the log file with a date & time stamp.
* The {DIR} function can now accept an optional 64 character
window title: {DIR title~path/mask}
* The {FILE} function can now accept an optional 64 character
window title: {FILE title~path/mask}
* The {LOGOFF} function logs a user off HDM if one was logged
on via the "User ID Security Table". This function will not
run the auto-logoff menu entry if one was specified in the
"Log Off Automatically" Table.
* The {NOCLEAR} function doesn't clear the screen before
running the menu entry in which it is used.
* The {SETPROJECT Project-Data} allows you to set or change the
project name before running the menu entry. This data is also
written to the HDM.LOG log file.
page 130
HARD DISK MENU SYSTEM Version 4.60
* The {SELECT} and {VSELECT} functions allow you to display
text other than the actual result. For example, you could
have a menu say "High Density 3.5" and "Low Density 3.5" but
the actual choices behind these friendly choices are " " and
"/F:720": {VSELECT display=choice}. Also the mouse will now
select the correct entry when more than one have the same
highlighted letter.
NEW AND IMPROVED STARTUP SWITCHES
These switches replace the old -F and -V startup switches:
* -VF allows you to have fast writing to for your video card,
including newer CGA cards. This is the default for non-CGA
video cards.
* -VM uses monochrome screens instead of color or shades of
gray.
* -VS stops screen static (snow) by waiting to redraw your
screen. This is the default for CGA video cards.
NEW AND IMPROVED PULL-DOWN MENUS
* The User ID Security Table can now contain a wild-card record
that will match any entered User ID.
* The DOS Window commands can now be up 128 characters long.
* All pull-down menu commands now have shortcut keys. These
keys are displayed to the right of each command.
* "Save Menu File" was renamed to "Write File."
* "Project" was moved from the Exit menu to "Change Project" in
the Global menu.
* "Switch menus" in the Local menu has been renamed to "Switch
Screens."
* The Security menu has been rearranged in a more logical form.
* "Add Entry" and "Change Entry" in the first pull-down menu
and "DOS Windows" in the Exit pull-down menu now allow you to
press F4 to search and use executable files.
page 131
HARD DISK MENU SYSTEM Version 4.60
* "Date/Time Format" in the Global menu is now "Date and Time."
Besides changing the format of the date and time, you can
change your computer's date and time.
* "Wallpaper" was added to the Local menu to change the
background character for most of your menu screens.
* "Reports" was added to the Exit menu to allow you to analyze
and report on usage of HDM. It has now been enhanced to save
and retrieve report formats. It also automatically calculates
the width of the report based on the report format settings.
* The <Esc> key now honors "Prior Menu" and "Log Off" security.
OTHER NEW FEATURES
HDM now warns you if you try to set a security code without first
setting a password on a security level in the Master Password
Table.
New customization features were added to HDM and its Help System.
See the sample demonstration files HDMDEMO.HDR, HELPDEMO.HDM,
HELPDEMO.000 and A1DEMO.000 for examples of these features.
Also in HDM's Help System, you can press <F2> to display and
print HDM's documentation files. This includes the on-disk User's
Guide, Order Form, Change History, and other DOC files. You can
customize this facility by removing or adding your own DOC files
in the directory that contains HDMHELP.EXE.
page 132
HARD DISK MENU SYSTEM Version 4.60
APPENDIX G: ORDER FORM
Send to: MicroFox Company Orders: (216) 659-9489
PO Box 447
Richfield OH 44286-0447 All amounts in U.S.$
USA
QUANTITY $ AMOUNT
Single Computer License Includes:
1. Registration of HDM ......... $50 per PC ________ ________
2. Published HDM User Manual
3. Choose HDM Disk Size: 5.25_____ 3.5_____
4. Tech Support (Mail, Phone, CompuServe)
5. Notice of Major Upgrades
6. Additional Programs from MicroFox
The following licenses include both 5.25/3.5"
diskettes plus the (number) of manuals shown:
5-User Network License (1) $95 per Server
10-User Network License (1) 125 per Server
20-User Network License (2) 200 per Server
Unlimited Network License (3) 275 per Server ________ ________
15-User Site License (1) ..... 195 per Site
40-User Site License (2) ..... 395 per Site
90-User Site License (3) ..... 695 per Site
Unlimited Site License (4) ..... 995 per Site ________ ________
25-User Corporate License (2) $295 all Sites
100-User Corporate License (3) $795 all Sites
300-User Corporate License (4) 1395 all Sites
Unlimited Corporate License(5) 1995 all Sites ________ ________
For LAN, Site or Corporate Licenses only:
Additional HDM User Manuals ........ $10 each ________ ________
for LAN, Site or Corporate Licenses only:
Additional HDM program disks ........ $2 each ________ ________
U.S.A. .......... $4 each
Canada .......... $5 each SHIPPING CHARGES ________ ________
All others ...... $9 each
REMEMBER TO ADD SHIPPING CHARGES ........ SUBTOTAL _____________
================================
OHIO residents: 6.25% SALES TAX ________ TOTAL _____________
page 133
HARD DISK MENU SYSTEM Version 4.60
Contact ________________________________________________________
Company ________________________________________________________
Address ________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
Phone _________________________ FAX _________________________
CREDIT CARDS: 1-216-659-9489
VISA or MASTER CARD number ______________________________________
Expiration Date _________ Signature ____________________________
How did you get your copy of HDM?
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
Suggestions or Comments:
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
page 134
HARD DISK MENU SYSTEM Version 4.60
ORDERS FROM OUTSIDE THE UNITED STATES
CANADA
Canadian orders can be paid in U.S. dollars or Canadian dollars
equal to the U.S. amount. The check can be drawn on a U.S. or
Canadian bank. MicroFox Company is NOT subject to the Canadian
withholding tax.
ALL OTHER COUNTRIES
Please make payment in one of the following ways:
1. By VISA or MasterCard - Call, fax, or mail the order form.
2. A check in your own currency. (equal to U.S. dollar amount)
3. A check in U.S. funds drawn on a U.S. or Canadian bank.
4. Cash sent by registered mail. (U.S. or your own currency)
Do NOT send a check in U.S. dollars drawn on other than a U.S.
or Canadian bank. Our bank will send this kind of check back to
the country of origin. This results in large bank fees and long
delays in receiving the funds.
NOTICE TO NEW USERS
Thank you for trying the Hard Disk Menu System. You are granted
a 30-day trial license to use this product on your DOS computer
system. This will allow you some time to "test-drive" HDM before
purchasing it. After the 30-day period, you must register HDM or
stop using it and erase it from you system.
If you have already registered with MicroFox Company or are in
the process of registering, we thank you and look forward to
supporting your needs now and in the future with enhancements
to our products.
page 135
