[DRIVER]
; Interpolation method used in Enhanced full duplex, ( Linear or Filter )
Interp8=Linear
Interp16=Linear

SaveSettingsOnExit=ON

[APPLETS]

[MIXER]

; Line ( LINE ) or microphone ( MIC ) selected as input

InputSelection=AUX

; Line input gain. 0 to 65535=0 to 22.5 db gain

lLineVolume=0
rLineVolume=0
LineGang=ON

; Mic input gain. 0 to 65535=0 to 22.5 db gain

lMicVolume=0
rMicVolume=0
MicGang=ON

; Aux input gain. 0 to 65535=0 to 22.5 db gain

lAuxInVolume=0
rAuxInVolume=0
AuxInGang=ON

; Loop back input gain. 0 to 65535=0 to 22.5 db gain
lLoopBackInputVolume=0
rLoopBackInputVolume=0
LoopBackInputGang=ON

; Monitor attenuation. 0 - 65535=mute to no attenuation.

MonitorVolume=57078
MonitorMute=OFF
MonitorMode=Recording

; CS4215 output atten setting. 0 - 65535=full attenuation to no attenuation in
; 32 1.5 Db steps.

; was 65535!
lMasterVolume=50000  
rMasterVolume=50000
MasterMute=OFF
MasterGang=ON

; Aux Volume setting 0 - 65535. 0=full attenuation, 65535 = no attenuation.

lAuxVolume=49151
rAuxVolume=49151
AuxMute=OFF
AuxGang=ON

; Aux2 volume setting 0 - 65535. 0=full attenuation, 65535 = no attenuation.

lAux2Volume=49151
rAux2Volume=49151
Aux2Mute=OFF
Aux2Gang=ON

; Line Mix volume setting 0 - 65535. 0=full attenuation, 65535 = no attenuation.

lLineMixVolume=49151
rLineMixVolume=49151
LineMixMute=OFF
LineMixGang=ON

; Mono Mix volume setting 0 - 65535. 0=full attenuation , 65535 = no attenuation.

MonoVolume=40166
MonoMute=ON

; MonoOutMute indicates the state of the mono output mute.
MonoOutMute=ON

; MicBoost indicates if 20db additional boost is added when the mic input is selected.

MicBoost=ON

HWMUTE=0,1,E

; Virtual Volume master

lVirtMaster=65535
rVirtMaster=65535

LowPriInputSelection=MIC
lLowPriMicVolume=32256
rLowPriMicVolume=32256
LowPriMicBoost=ON
lLowPriLineVolume=39680
rLowPriLineVolume=39680
lLowPriLoopBackInputVolume=38400
rLowPriLoopBackInputVolume=38400
lLowPriAuxInVolume=17664
rLowPriAuxInVolume=17664
VirtMasterMute=OFF
VirtMasterGang=ON

[RECORD]
; HighPassFilter ON or OFF, when on will reduce signal offset at the expense of slightly
; lower fidelity ( probably not audible ) at low frequencies.

HighPassFilter=OFF

; The default dither state.  This may be over-ridden at some record formats.
Dither=OFF

[Meter]                                 ;       Control Panel Section

; Tells the control panel to come up running the VU meter when the inputs dialog is shown.
MeterDisplay=OFF

; DecayRate defines how quickly the VU meter bars decay
; 0=no decay, 255=immediate and full decay. default = 8.
DecayRate=16

; The number of time / second that the VU meter will update. default=20.
VUUpdateRate=10


[CONTROLS]
; This section dictates the controls which will be present on a WSS mixer.

;******************************************
;* Mixer Lines To include
;******************************************

MixerSources=Wave,Aux1,Aux2,Line
;MixerSources=Line,Monitor,Aux1,Wave

;******************************************
;* Input Lines To include
;******************************************

InputSources=Aux1,Line,Mic
;InputSources=Mic,Line

;**********************************************************
;* Line Source Descriptions ( short/long names )
;**********************************************************

ShortNameLine=LineIn
;LongNameLine=
ShortNameAux1=CD/Line
;LongNameAux1=
ShortNameAux2=FM/Synth
;LongNameAux2=
ShortNameMono=
;LongNameMono=
;ShortNameMonitor=
;LongNameMonitor=
;ShortNameWave=
;LongNameWave=
ShortNameMic=Mic
;LongNameMic=
ShortNameLoopback=Mixer
;LongNameLoopback=


;**********************************************************
;* Thing connected to Sources entries
;**********************************************************

; These are the possible assignment values:
;       Undefined, Digital, Line, Microphone, Synthesizer
;       CompactDisk, Telephone, PCSpeaker, WaveOut, Auxiliary, Analog

SourceForLine=Line
SourceForAux1=CompactDisk
SourceForAux2=Synthesizer
SourceForMono=
SourceForMic=Microphone