MEDIA CONCEPT 2.0 INFORMATION
------------------------------------
1. INSTALLATION
To install just execute the installation program, MCSETUP.BAT,
found on the diskette labeled "Media Concept 2.0 Disk 1". MCSETUP.BAT
will install all Media Concept 2.0 files into your PC hard disk.
To begin installation, follow these steps.
1. Place the distribution disk labeled "Media Concept
2.0 Disk 1" in floppy drive and change drive.
2. Type MCSETUP and press <Enter>.
MCSETUP.BAT may add the MC environment settings into your AUTOEXEC.BAT
file, and creates MC.CFG file containing the configuration information.
2. PACKAGE CONTENTS
The Media Concept 2.0 software package contains :
- Two 5.25" 1.2M disks
- Media Concept 2.0 Disk 1
- Media Concept 2.0 Disk 2
The following files are contained in 1.2M diskette.
Media Concept 2.0 Disk 1 -
MCSETUP.BAT - Media Concept 2.0 software installation program
MCINST.EXE - Hard disk installation program
MCTEST.EXE - Media Concept 2.0 card test program
MCVOIS.EXE - Voice integrated program
MCPLAY.EXE - Voice play program
MCREC.EXE - Voice record program
MCSSR.EXE - Change sampling rate program
MCTEST.VOC - Voice sample file
README - This file
LHARC.EXE - Decompression program for MCDEMO.LZH
MCDEMO.BAT - Media Concept 2.0 demo program
MCDEMO.VOC - Media Concept 2.0 demo voice file
MCDEMO.ACT - Media Concept 2.0 demo act file
AAPLAY.EXE - Media Concept 2.0 demo play file
Media Concept 2.0 Disk 2 -
MCSETUP.BAT - Media Concept 2.0 software installation program
MCDEMO.LZH - Media Concept 2.0 demo compression file
3. MC ENVIRONMENT
Several parameters defined in MC.CFG file are described as follows.
A220 I7 D1 T3
Note: * A refers to I/O address setting
* I refers to IRQ setting
* D refers to DMA channel setting
* T refers to Media Concept 2.0 card type
