BOARD
     ID = "ICU1240"
     NAME = "Procomp USA, Incorporated S-DCB"
     MFR = "Procomp USA, Incorporated"
     CATEGORY = "MSD"
     SLOT = ISA16
     COMMENTS = "Procomp S-DCB\n"
     VERSION = 4.0

SWITCH(1) = 8
     NAME = "Channel Select"
     STYPE = DIP
     LABEL = LOC(8-1) "SW1/8" "SW1/7" "SW1/6" "SW1/5" 
		      "SW1/4" "SW1/3" "SW1/2" "SW1/1" 
     FACTORY = LOC(8-1) 11001000

JUMPER(1) = 1
     NAME = "TERMPWR to SCSI"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1)  "1"
     FACTORY = LOC(1) 1

JUMPER(4) = 1
     NAME = "UPS battery Low contact position"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "1"
     FACTORY = LOC(1) 0

JUMPER(5) = 1
     NAME = "UPS On-Line contact position"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "1"
     FACTORY = LOC(1) 0

FUNCTION = "SCSI Controller"
  TYPE = "SCS"
  SUBFUNCTION = "BIOS Address"
     CHOICE = "CC000"
       FREE
       MEMORY = 8K
       ADDRESS = 0CC000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = SWITCH(1) LOC(5-7) 101
     CHOICE = "DC000"
       FREE
       MEMORY = 8K
       ADDRESS = 0DC000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = SWITCH(1) LOC(5-7) 000
     CHOICE = "DA000"
       FREE
       MEMORY = 8K
       ADDRESS = 0DA000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = SWITCH(1) LOC(5-7) 010
     CHOICE = "D8000"
       FREE
       MEMORY = 8K
       ADDRESS = 0D8000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = SWITCH(1) LOC(5-7) 011
     CHOICE = "CE000"
       FREE
       MEMORY = 8K
       ADDRESS = 0CE000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = SWITCH(1) LOC(5-7) 100
     CHOICE = "CA000"
       FREE
       MEMORY = 8K
       ADDRESS = 0CA000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = SWITCH(1) LOC(5-7) 110
     CHOICE = "C8000"
       FREE
       MEMORY = 8K
       ADDRESS = 0C8000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = SWITCH(1) LOC(5-7) 111

  SUBFUNCTION = "Channel Select"
     CHOICE = "CH:1,I/O:340,IRQ:11"
       FREE
       PORT = 0340H-0347H
       FREE
       IRQ = 11
       SHARE = NO
       INIT = SWITCH(1) LOC(1-3) 001
     CHOICE = "CH:2,I/O:348,IRQ:12"
       FREE
       PORT = 0348H-034FH
       FREE
       IRQ = 12
       SHARE = NO
       INIT = SWITCH(1) LOC(1-3) 111
     CHOICE = "CH:3,I/O:320,IRQ:10"
       FREE
       PORT = 0320H-0327H
       FREE
       IRQ = 10
       SHARE = NO
       INIT = SWITCH(1) LOC(1-3) 011
     CHOICE = "CH:4,I/O:328,IRQ:15"
       FREE
       PORT = 0328H-032FH
       FREE
       IRQ = 15
       SHARE = NO
       INIT = SWITCH(1) LOC(1-3) 101
     CHOICE = "CH:5,I/O:380,IRQ:10"
       FREE
       PORT = 0380H-0387H
       FREE
       IRQ = 10
       SHARE = NO
       INIT = SWITCH(1) LOC(1-3) 010
     CHOICE = "CH:6,I/O:388,IRQ:15"
       FREE
       PORT = 0388H-038FH
       FREE
       IRQ = 15
       SHARE = NO
       INIT = SWITCH(1) LOC(1-3) 100
     CHOICE = "Disabled"
       DISABLE = YES
       FREE
       INIT = SWITCH(1) LOC(1-3) 110 | 000

  SUBFUNCTION = "SCSI Parity check"
   CHOICE = "Enabled"
      FREE
      INIT = SWITCH(1) LOC(8) 1
   CHOICE = "Disabled"
      DISABLE = YES
      FREE
      INIT = SWITCH(1) LOC(8) 0

  SUBFUNCTION = "Term. Power to SCSI bus"
   CHOICE = "Supplied"
      FREE
      INIT = JUMPER(1) LOC(1) 1
   CHOICE = "Not Supplied"
      FREE
      INIT = JUMPER(1) LOC(1) 0

FUNCTION = "Floppy Drive"
  TYPE = "FDC"
     CHOICE = "3F0-3F7"
       FREE
       PORT = 03F0H-03F7H
	   FREE
	   IRQ = 6
	   FREE
	   DMA = 2
     CHOICE = "370-377"
       FREE
       PORT = 0370H-0377H
	   FREE
	   IRQ = 6
	   FREE
	   DMA = 2
	CHOICE = "Disabled"
		DISABLE = YES 

FUNCTION = "UPS"
  TYPE = "OTH"
  SUBFUNCTION = "UPS Battery Low contact position"
   CHOICE = "Open"
      FREE
      INIT = JUMPER(4) LOC(1) 0
   CHOICE = "Closed"
      FREE
      INIT = JUMPER(4) LOC(1) 1

  SUBFUNCTION = "UPS On-line contact position"
   CHOICE = "Open"
      FREE
      INIT = JUMPER(5) LOC(1) 0
   CHOICE = "Closed"
      FREE
      INIT = JUMPER(5) LOC(1) 1