BOARD
     ID          = "ICU1020"
     NAME        = "NCL538C"
     MFR         = "National Computer Ltd."
     CATEGORY    = "MSD"
     SLOT        = ISA16
     COMMENTS    = "Hard Drives Supported: Two AT Interface (IDE) drives\n
                    Floppy Drives Supported: Two 360KB, 720KB, 1.2MB, or 1.4MB drives"
     VERSION     = 4.0

JUMPER(1) = 1
     NAME = "BIOS Address"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP2"
     FACTORY = LOC(1) 0
JUMPER(2) = 1
     NAME = "IRQ"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP5"
     FACTORY = LOC(1) 1
JUMPER(3) = 1
     NAME = "Interrupt Request"
     JTYPE = TRIPOLE
     VERTICAL = NO
     LABEL = LOC(1) "JP7"
     FACTORY = LOC(1) 0
JUMPER(4) = 1
     NAME = "I/O Channel Ready"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "JP8"
     FACTORY = LOC(1) 0
JUMPER(5) = 1
     NAME = "BIOS"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "JP9"
     FACTORY = LOC(1) 0
JUMPER(6) = 1
     NAME = "Hard Drive port Address"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "JP10"
     FACTORY = LOC(1) 0
JUMPER(7) = 1
     NAME = "Mode"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "JP11"
     FACTORY = LOC(1) 0

FUNCTION = "IDE Controller"
  TYPE = "IDE"
  SUBFUNCTION = "BIOS Address"
     CHOICE = "DC000"
       FREE
       MEMORY = 64K
       ADDRESS = 0DC000H 
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(1) LOC(1) 1
     CHOICE = "CC000"
       FREE
       MEMORY = 64K
       ADDRESS = 0CC000H 
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(1) LOC(1) 0

  SUBFUNCTION = "IRQ"
     CHOICE = "Connected directly to host"
       FREE
       INIT = JUMPER(2) LOC(1) 0     
     CHOICE = "Buffer mode enabled"
       FREE
       INIT = JUMPER(2) LOC(1) 1

  SUBFUNCTION = "Hard Drive Interrupt"
     CHOICE = "IRQ15"
       FREE
       IRQ = 15
       INIT = JUMPER(3) LOC(1) 1
     CHOICE = "IRQ14"
       FREE
       IRQ = 14
       INIT = JUMPER(3) LOC(1) 0


  SUBFUNCTION = "BIOS"
     CHOICE = "Enabled"
       FREE
       INIT = JUMPER(5) LOC(1) 1
     CHOICE = "Diabled"
       DISABLE = YES
       FREE
       INIT = JUMPER(5) LOC(1) 0

  SUBFUNCTION = "Hard Drive Port Addres"
     CHOICE = "170-177"
       FREE
       PORT = 0170H-0177H
       INIT = JUMPER(6) LOC(1) 1
     CHOICE = "1F0-1F7"
       FREE
       PORT = 01F0H-01F7H
       INIT = JUMPER(6) LOC(1) 0

  SUBFUNCTION = "Mode"
     CHOICE = "Normal Operation"
       FREE
       INIT = JUMPER(7) LOC(1) 0
     CHOICE = "Diagnostic"
       FREE
       INIT = JUMPER(7) LOC(1) 1

FUNCTION = "Floppy Drive"
  TYPE = "FDC"
     CHOICE = "3F0-3F7"
       FREE
       PORT = 03F0H-03F7H
	   FREE
	   IRQ = 6
	   FREE
	   DMA = 2
     CHOICE = "370-377"
       FREE
       PORT = 0370H-0377H
	   FREE
	   IRQ = 6
	   FREE
	   DMA = 2
	CHOICE = "Disabled"
		DISABLE = YES