BOARD
     ID          = "ICU0950"
     NAME        = "Acculogic sIDE-3/plus"
     MFR         = "Acculogic"
     CATEGORY    = "MSD"
     SLOT        = ISA16
     VERSION = 3.0


JUMPER(1) = 1
     NAME = "IRQ normal"
     JTYPE = PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "J1"
     FACTORY = LOC(1) 1

JUMPER(2) = 1
     NAME = "IRQ delay"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP2"
     FACTORY = LOC(1) 0
JUMPER(3) = 1
     NAME = "Floppy drive port address"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP6"
     FACTORY = LOC(1) 0

JUMPER(4) = 1
     NAME = "Hard Drive port address"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP7"
     FACTORY = LOC(1) 0

JUMPER(5) = 1
     NAME = "Floppy drive speed"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP8"
     FACTORY = LOC(1) 0

JUMPER(6) = 1
     NAME = "Hard Drive port address"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP9"
     FACTORY = LOC(1) 0

JUMPER(7) = 1
     NAME = "I/O Channel Ready signal"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP10"
     FACTORY = LOC(1) 0

JUMPER(8) = 1
     NAME = "BIOS Enable"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP11"
     FACTORY = LOC(1) 0

JUMPER(9) = 1
     NAME = "Drive A: supports 2.88MB"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP14"
     FACTORY = LOC(1) 0

JUMPER(10) = 1
     NAME = "Drive B: supports 2.88MB"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP14"
     FACTORY = LOC(1) 0

FUNCTION = "IDE Controller"
  TYPE = "IDE"
  SUBFUNCTION = "BIOS Address"
     CHOICE = "Enable"
       FREE
       MEMORY = 16K ;CC000-C8000=4000H
       ADDRESS = 0C8000H |0CC000H|0D8000H |0DC000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(7) LOC(1) 0
     CHOICE = "Disabled"
       DISABLE = YES
       FREE
       INIT = JUMPER(7) LOC(1) 1

  SUBFUNCTION = "IRQ"
   CHOICE = "IRQ Normal"
       FREE
       INIT = JUMPER(1) LOC(1) 0
       INIT = JUMPER(2) LOC(1) 1
   CHOICE = "IRQ Delayed"
       FREE
       INIT = JUMPER(1) LOC(1) 1
       INIT = JUMPER(2) LOC(1) 0
 
  SUBFUNCTION = "Hard Drive"
     CHOICE = "1F0-1F7"
       FREE
       PORT = 01F0H-01F7H
	   FREE
	   IRQ = 14
     CHOICE = "170-177"
       FREE
       PORT = 0170H-0177H
	   FREE
	   IRQ = 14
	CHOICE = "Disabled"
		DISABLE = YES 

FUNCTION = "Floppy Drive"
  TYPE = "FDC"
  SUBFUNCTION = "Ports"
     CHOICE = "3F0-3F7"
       FREE
       PORT = 03F0H-03F7H
	   FREE
	   IRQ = 6
	   FREE
	   DMA = 2
     CHOICE = "370-377"
       FREE
       PORT = 0370H-0377H
	   FREE
	   IRQ = 6
	   FREE
	   DMA = 2
	CHOICE = "Disabled"
		DISABLE = YES 
 
  SUBFUNCTION = "Floppy Drives Speed"
     CHOICE = "Single"
       FREE
       INIT = JUMPER(5) LOC(1) 0
     CHOICE = "Dual"
       FREE
       INIT = JUMPER(5) LOC(1) 1


  SUBFUNCTION = "2.88 MB drives"
     CHOICE = "Not Supported on A:"
       FREE
       INIT = JUMPER(8) LOC(1) 0
     CHOICE = "Supported on A:"
       FREE
       INIT = JUMPER(8) LOC(1) 1

  SUBFUNCTION = "2.88 MB drives"
     CHOICE = "Not Supported on B:"
       FREE
       INIT = JUMPER(9) LOC(1) 0
     CHOICE = "Supported on B:"
       FREE
       INIT = JUMPER(9) LOC(1) 1