BOARD
     ID = "ICU0780"
     NAME = "Diamond SpeedStar 24X VGA adapter"
     MFR = "Diamond Computer Systems, Inc."
     CATEGORY = "VID"
     SLOT = ISA16
     COMMENTS = "Diamond SpeedStar 24X VGA adapter"
     VERSION = 1.0


SOFTWARE(1) = "Use INSTALL.EXE to configure the SpeedStar 24X. \n"

SWITCH(1) = 5
  NAME = "Switch Block"
  STYPE = DIP
  VERTICAL = NO
  LABEL = LOC(1-5) "SW1" "SW2" "SW3" "SW4" "SW5"
  FACTORY = LOC(1-5) 11111

JUMPER(1) = 1
  NAME = "Zero Wait State"
  JTYPE = PAIRED
  VERTICAL = NO
  LABEL = LOC(1) "JP1"
  FACTORY = LOC(1) 1

JUMPER(3) = 1
  NAME = "Interrupt"
  JTYPE = PAIRED
  VERTICAL = NO
  LABEL = LOC(1) "JP3"
  FACTORY = LOC(1) 1

JUMPER(4) = 1
  NAME = "8/16 bit BIOS"
  JTYPE = PAIRED
  VERTICAL = NO
  LABEL = LOC(1) "JP4"
  FACTORY = LOC(1) 1

 FUNCTION = "VGA Adapter Settings"
 TYPE = "VID"
  SUBFUNCTION = "Video Memory Address"
     CHOICE = "A0000-AFFFF"
       FREE
       MEMORY = 64K
       ADDRESS = 0A0000H
       WRITABLE = YES
       MEMTYPE = OTH
       SHARE = NO
     CHOICE = "B8000-BFFFF"
       FREE
       MEMORY = 32K
       ADDRESS = 0B8000H
       WRITABLE = YES
       MEMTYPE = OTH
       SHARE = NO

  SUBFUNCTION = "Video BIOS Address"

     CHOICE = "C0000-C7FFF"
       FREE
       MEMORY = 32K
       ADDRESS = 0C0000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO

  SUBFUNCTION = "Video Port Address"

      CHOICE = "Enabled"
       FREE
       PORT = 03B0H-03B3H
       FREE
       PORT = 03B4H-03BBH
       FREE
       PORT = 3C0H-3CAH
       FREE
       PORT = 3CCH-3CCH
       FREE
       PORT = 3CEH-3CFH
       FREE
       PORT = 03D0H-03D3H
       FREE
       PORT = 03D4H-03DFH
       FREE
; This is not a Serial port and 
; it is video address such as 42E8, 46E8, etc.
       PORT = 2E8H
 
SUBFUNCTION = "IRQ"
     CHOICE = "Enabled"
       FREE
       IRQ = 2
       INIT = JUMPER(3) LOC(1) 1
     CHOICE = "Disabled"
       DISABLE = YES
       FREE
       INIT = JUMPER(3) LOC(1) 0

FUNCTION = "ZERO WAIT STATE"
     CHOICE = "Enabled"
       FREE
       INIT = JUMPER(1) LOC(1) 1
     CHOICE = "Disabled"
       DISABLE = YES
       FREE
       INIT = JUMPER(1) LOC(1) 0

FUNCTION = "8/16 bit BIOS Access"
     CHOICE = "16 bit BIOS"
       FREE
       INIT = JUMPER(4) LOC(1) 1
     CHOICE = "8 bit BIOS"
       FREE
       INIT = JUMPER(4) LOC(1) 0

FUNCTION = "800x600 Mode setting"
     CHOICE = "V:56Hz Non-interfaced H:35.1"
       FREE
       INIT = SWITCH(1) LOC(1 2) 11
     CHOICE = "V:72Hz Non-interfaced H:48.1"
       FREE
       INIT = SWITCH(1) LOC(1 2) 10
     CHOICE = "V:60Hz Non-interfaced H:37.1"
       FREE
       INIT = SWITCH(1) LOC(1 2) 01

FUNCTION = "1024x768 Mode setting"
     CHOICE = "V:43Hz Interfaced H:35.5"
       FREE
       INIT = SWITCH(1) LOC(3 4) 11
     CHOICE = "V:70Hz Non-interfaced H:56.5"
       FREE
       INIT = SWITCH(1) LOC(3 4) 10
     CHOICE = "V:60Hz Non-interfaced H:48.3"
       FREE
       INIT = SWITCH(1) LOC(3 4)01
     CHOICE = "V:72Hz Non-interfaced H:58.1"
       FREE
       INIT = SWITCH(1) LOC(3 4)00
    
FUNCTION = "Alternate timing"
     CHOICE = "Normal"
       FREE
       INIT = SWITCH(1) LOC(5) 1
     CHOICE = "Alternate"
       FREE
       INIT = SWITCH(1) LOC(5) 0