;Western Digital WD8003E Configuration File
;This file does not describe all board options.
;Only those options that require system resources are described.
BOARD
     ID = "ICU0100"
     NAME = "Western Digital WD8003E Network Adapter"
     MFR = "Western Digital"
     CATEGORY = "NET"
     SLOT = ISA8
     COMMENTS = "Western Digital WD8003E Network Adapter\n"
     VERSION = 2.0

JUMPER(1) = 5
     NAME = "I/O Base Address Selection"
     JTYPE = PAIRED
     VERTICAL = NO
     REVERSE = YES
     LABEL = LOC(1-5) "2"
                      "4"
                      "6"
                      "8"
                      "10"
     FACTORY = LOC(1-5) 01101

JUMPER(2) = 6
     NAME = "Interrupt Select"
     JTYPE = PAIRED
     VERTICAL = NO
     REVERSE = NO
     LABEL = LOC(6-1) "11"
                      "9"
                      "7"
                      "5"
                      "3"
                      "1"
     FACTORY = LOC(6-1) 010000

JUMPER(3) = 6
     NAME = "Cable Type"
     JTYPE = PAIRED
     VERTICAL = YES
     REVERSE = NO
     LABEL = LOC(6-1) " "
                      " "
                      " "
                      " "
                      " "
                      " "
     FACTORY = LOC(6-1)111111

JUMPER(4) = 1
     NAME = "Ethernet Version"
     JTYPE = Paired
     VERTICAL = NO
     LABEL = LOC(1) "W4"
     FACTORY = LOC(1) 0

JUMPER(5) = 1
     NAME = "Thin Segment Type"
     JTYPE = Paired
     VERTICAL = NO
     LABEL = LOC(1) "W5"
     FACTORY = LOC(1) 1

SOFTWARE(1) ="The address for the RAM buffer is set by the networking
              software you are using.  Refer to the manuals for your
              netwoking software for instructions on setting the address.\n\n
              Set the RAM Buffer Address = x"

FUNCTION = "System Resources"
TYPE = "NET"

SUBFUNCTION = "Ram Buffer Address"

     CHOICE = "Edit Resource to Chg"
       LINK
       MEMORY = 8K
         ADDRESS = 0C0000H | 0C2000H | 0C4000H | 0C6000H |
                   0C8000H | 0CA000H | 0CC000H | 0CE000H |
                   0D0000H | 0D2000H | 0D4000H | 0D6000H |
                   0D8000H | 0DA000H | 0DC000H | 0DE000H |
                   0E0000H | 0E2000H | 0E4000H | 0E6000H |
                   0E8000H | 0EA000H | 0EC000H | 0EE000H |
                   0F0000H | 0F2000H | 0F4000H | 0F6000H |
                   0F8000H | 0FA000H | 0FC000H | 0FE000H
         WRITABLE = YES
         SHARE = NO
         MEMTYPE = OTH
       INIT = SOFTWARE(1) "x=C0000H" | "x=C2000H" | "x=C4000H" | "x=C6000H" |
                          "x=C8000H" | "x=CA000H" | "x=CC000H" | "x=CE000H" |
                          "x=D0000H" | "x=D2000H" | "x=D4000H" | "x=D6000H" |
                          "x=D8000H" | "x=DA000H" | "x=DC000H" | "x=DE000H" |
                          "x=E0000H" | "x=E2000H" | "x=E4000H" | "x=E6000H" |
                          "x=E8000H" | "x=EA000H" | "x=EC000H" | "x=EE000H" |
                          "x=F0000H" | "x=F2000H" | "x=F4000H" | "x=F6000H" |
                          "x=F8000H" | "x=FA000H" | "x=FC000H" | "x=FE000H" 

SUBFUNCTION = "I/O Base Address"

     CHOICE = "280h-29Fh"
       LINK
       PORT = 280H-29FH
       INIT = JUMPER(1) LOC(2-5) 1101
     CHOICE = "200h-21Fh"
       LINK
       PORT = 200H-21FH
       INIT = JUMPER(1) LOC(2-5) 1111
     CHOICE = "220h-23Fh"
       LINK
       PORT = 220H-23FH
       INIT = JUMPER(1) LOC(2-5) 0111
     CHOICE = "240h-25Fh"
       LINK
       PORT = 240H-25FH
       INIT = JUMPER(1) LOC(2-5) 1011
     CHOICE = "260h-27Fh"
       LINK
       PORT = 260H-27FH
       INIT = JUMPER(1) LOC(2-5) 0011
     CHOICE = "2A0h-2BFh"
       LINK
       PORT = 2A0H-2BFH
       INIT = JUMPER(1) LOC(2-5) 0101
     CHOICE = "2C0h-2DFh"
       LINK
       PORT = 2C0H-2DFH
       INIT = JUMPER(1) LOC(2-5) 1001
     CHOICE = "2E0h-2FFh"
       LINK
       PORT = 2E0H-2FFH
       INIT = JUMPER(1) LOC(2-5) 0001
     CHOICE = "300h-31Fh"
       LINK
       PORT = 300H-31FH
       INIT = JUMPER(1) LOC(2-5) 1110
     CHOICE = "320h-33Fh"
       LINK
       PORT = 320H-33FH
       INIT = JUMPER(1) LOC(2-5) 0110
     CHOICE = "340h-35Fh"
       LINK
       PORT = 340H-35FH
       INIT = JUMPER(1) LOC(2-5) 1010
     CHOICE = "360h-37Fh"
       LINK
       PORT = 360H-37FH
       INIT = JUMPER(1) LOC(2-5) 0010
     CHOICE = "380h-39Fh"
       LINK
       PORT = 380H-39FH
       INIT = JUMPER(1) LOC(2-5) 1100
     CHOICE = "3A0h-3BFh"
       LINK
       PORT = 3A0H-3BFH
       INIT = JUMPER(1) LOC(2-5) 0100
     CHOICE = "3C0h-3DFh"
       LINK
       PORT = 3C0H-3DFH
       INIT = JUMPER(1) LOC(2-5) 1000
     CHOICE = "3E0h-3FFh"
       LINK
       PORT = 3E0H-3FFH
       INIT = JUMPER(1) LOC(2-5) 0000

SUBFUNCTION = "Interrupt"

     CHOICE = "IRQ 3"
       LINK
       IRQ = 3
       INIT = JUMPER(2) LOC(6-1) 010000
     CHOICE = "IRQ 2"
       LINK
       IRQ = 2
       INIT = JUMPER(2) LOC(6-1) 100000
     CHOICE = "IRQ 4"
       LINK
       IRQ = 4
       INIT = JUMPER(2) LOC(6-1) 001000
     CHOICE = "IRQ 5"
       LINK
       IRQ = 5
       INIT = JUMPER(2) LOC(6-1) 000100
     CHOICE = "IRQ 6"
       LINK
       IRQ = 6
       INIT = JUMPER(2) LOC(6-1) 000010
     CHOICE = "IRQ 7"
       LINK
       IRQ = 7
       INIT = JUMPER(2) LOC(6-1) 000001


FUNCTION = "Cable Type"
     CHOICE = "Thin(BNC)"
       FREE 
       INIT=JUMPER(3) LOC(6-1) 111111
     CHOICE = "Thick(AUI)"
       FREE 
       INIT=JUMPER(3) LOC(6-1) 000000


FUNCTION = "Thin Ethernet Segment Length"
     CHOICE = "Standard(100 Meters)"
       FREE 
       INIT=JUMPER(5) LOC(1) 1
     CHOICE = "300 Meters"
       FREE 
       INIT=JUMPER(5) LOC(1) 0

FUNCTION = "Ethernet Version"
     CHOICE = "Version 2"
       FREE 
       INIT=JUMPER(4) LOC(1) 0
     CHOICE = "Version 1"
       FREE 
       INIT=JUMPER(4) LOC(1) 1

FUNCTION = "Wait-State Selection"
     CHOICE = "PC AT > 8Mhz"
       FREE 
       INIT=JUMPER(1) LOC(1) 0
     CHOICE = "PC AT 6MHz"
       FREE 
       INIT=JUMPER(1) LOC(1) 1