;WD1007A-WA2 Configuration File
;This file does not describe all board options.
;Only those options that require system resources are described.
BOARD
     ID = "ICU0051"
     NAME = "Western Digital WD1007A-WA2(WITHOUT BIOS) Hard/Floppy Disk Controller"
     MFR = "Western Digital"
     CATEGORY = "MSD"
     SLOT = ISA16
     COMMENTS = "Western Digital WD1007A-WA2(WITHOUT BIOS) Hard/Floppy Disk Controller \n"
     VERSION = 2.0

JUMPER(12) = 1
     NAME = "Hard Disk I/O Port"
     JTYPE = PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "W12"
     FACTORY = LOC(1) 0

JUMPER(4) = 1
     NAME = "Floppy Enable"
     JTYPE = Paired
     VERTICAL = YES
     LABEL = LOC(1) "W4"
     FACTORY = LOC(1) 0

JUMPER(13) = 1
     NAME = "Floppy Enable"
     JTYPE = PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "W13"
     FACTORY = LOC(1) 1


JUMPER(6) = 1
     NAME = "Floppy Address"
     JTYPE = TRIPOLE
     VERTICAL = YES
     LABEL = LOC(1) "W6"
     FACTORY = LOC(1) 1


GROUP = "System Resources used by WD1007-WA2"
TYPE = "MSD"
FUNCTION = "Hard Disk Controller"
TYPE = "IDE"
SUBFUNCTION = "Hard Disk I/O Port"

     CHOICE = "Primary 1F0-1F7"
       FREE
       PORT = 1F0H-1F7H
	   FREE
	   IRQ = 14
       INIT = JUMPER(12) LOC(1) 0

     CHOICE = "Secondary 170-177"
       FREE
       PORT = 170H-177H
	   FREE
	   IRQ = 14
       INIT = JUMPER(12) LOC(1) 1

FUNCTION = "Floppy Disk Controller"
TYPE = "FDC"

     CHOICE = "Primary 3F2-3F7"
       LINK
       PORT = 3F2H-3F7H
       FREE
       IRQ = 6
       FREE
       DMA = 2
       INIT = JUMPER(6) LOC(1) 1

     CHOICE = "Secondary 372-377"
       LINK
       PORT = 372H-377H
       FREE
       IRQ = 6
       FREE
       DMA = 2
       INIT = JUMPER(6) LOC(1) 0

     CHOICE = "Disable"
       DISABLE = YES
       LINK
       INIT = JUMPER(4) LOC(1) 1
       INIT = JUMPER(13) LOC(1) 0

ENDGROUP