;
; Hewlett-Packard EtherTwist Adapter Card/16 Plus TL Version 1.00
; Configuration file version 2.01 [bek]
; !HWP18A0.CFG 7-20-1993
;
; (C)Copyright Hewlett-Packard Co., 1989-1993
; All Rights Reserved.
;
BOARD
ID = "HWP18A0"
NAME = "HP EtherTwist PC LAN Adapter/16 TL Plus (27252A)"
MFR = "Hewlett-Packard Co."
CATEGORY = "NET"
SLOT = ISA16
LENGTH = 180
AMPERAGE = 300
COMMENTS = "The HP EtherTwist PC LAN Adapter/16 TP Plus is a 16-bit
ThinLAN (Type 10BASE2) compatible local area networking
board.\n\n
Your board configuration parameters of I/O Address Range,
Interrupt, Memory Map Location and Boot ROM Location may be
chosen using this EISA configuration utility to match the
requirements of your computer. Your board also must be set to
match the values selected. Use the program
HPLANSET.EXE to set your board configuration parameters.
HPLANSET.EXE is on the board's Support Disk."
SOFTWARE(1) = "
The following configuration parameters have been selected
for the HP EtherTwist PC LAN Adapter/16 TL Plus. The
program HPLANSET.EXE must be used to
configure your board to match these values.
Your network software also may ask you for this data:"
FUNCTION = "HP PC LAN Adapter/16 TL Plus (27252A)"
TYPE = "NET"
CONNECTION = "One ThinLAN BNC COAX connector, and\n
one IEEE Standard 802.3 AUI connector"
SUBFUNCTION = "I/O Address Range"
;
; Under each choice, the three "INIT = PORTADR..." statements
; cause the board registers to be reloaded from the board EEPROM.
; This happens automatically on power-up, but adding these statements
; here causes it to happen on CRTL-ALT-DEL resets also.
;
CHOICE = "300 - 31Fh (Factory Default)"
LINK
PORT = 300h - 31Fh
INIT = SOFTWARE(1) "I/O Range 300 - 31Fh"
INIT = PORTADR(302h) 00000011
INIT = PORTADR(308h) 00000000
INIT = PORTADR(308h) 00000001
CHOICE = "100 - 11Fh"
LINK
PORT = 100h - 11Fh
INIT = SOFTWARE(1) "I/O Range 100 - 11Fh"
INIT = PORTADR(102h) 00000011
INIT = PORTADR(108h) 00000000
INIT = PORTADR(108h) 00000001
CHOICE = "120 - 13Fh"
LINK
PORT = 120h - 13Fh
INIT = SOFTWARE(1) "I/O Range 120 - 13Fh"
INIT = PORTADR(122h) 00000011
INIT = PORTADR(128h) 00000000
INIT = PORTADR(128h) 00000001
CHOICE = "140 - 15Fh"
LINK
PORT = 140h - 15Fh
INIT = SOFTWARE(1) "I/O Range 140 - 15Fh"
INIT = PORTADR(142h) 00000011
INIT = PORTADR(148h) 00000000
INIT = PORTADR(148h) 00000001
CHOICE = "180 - 19Fh"
LINK
PORT = 180h - 19Fh
INIT = SOFTWARE(1) "I/O Range 180 - 19Fh"
INIT = PORTADR(182h) 00000011
INIT = PORTADR(188h) 00000000
INIT = PORTADR(188h) 00000001
CHOICE = "1A0 - 1BFh"
LINK
PORT = 1A0h - 1BFh
INIT = SOFTWARE(1) "I/O Range 1A0 - 1BFh"
INIT = PORTADR(1A2h) 00000011
INIT = PORTADR(1A8h) 00000000
INIT = PORTADR(1A8h) 00000001
CHOICE = "1C0 - 1DFh"
LINK
PORT = 1C0h - 1DFh
INIT = SOFTWARE(1) "I/O Range 1C0 - 1DFh"
INIT = PORTADR(1C2h) 00000011
INIT = PORTADR(1C8h) 00000000
INIT = PORTADR(1C8h) 00000001
CHOICE = "1E0 - 1FFh"
LINK
PORT = 1E0h - 1FFh
INIT = SOFTWARE(1) "I/O Range 1E0 - 1FFh"
INIT = PORTADR(1E2h) 00000011
INIT = PORTADR(1E8h) 00000000
INIT = PORTADR(1E8h) 00000001
CHOICE = "200 - 21Fh"
LINK
PORT = 200h - 21Fh
INIT = SOFTWARE(1) "I/O Range 200 - 21Fh"
INIT = PORTADR(202h) 00000011
INIT = PORTADR(208h) 00000000
INIT = PORTADR(208h) 00000001
CHOICE = "220 - 23Fh"
LINK
PORT = 220h - 23Fh
INIT = SOFTWARE(1) "I/O Range 220 - 23Fh"
INIT = PORTADR(222h) 00000011
INIT = PORTADR(228h) 00000000
INIT = PORTADR(228h) 00000001
CHOICE = "240 - 25Fh"
LINK
PORT = 240h - 25Fh
INIT = SOFTWARE(1) "I/O Range 240 - 25Fh"
INIT = PORTADR(242h) 00000011
INIT = PORTADR(248h) 00000000
INIT = PORTADR(248h) 00000001
CHOICE = "260 - 27Fh"
LINK
PORT = 260h - 27Fh
INIT = SOFTWARE(1) "I/O Range 260 - 27Fh"
INIT = PORTADR(262h) 00000011
INIT = PORTADR(268h) 00000000
INIT = PORTADR(268h) 00000001
CHOICE = "280 - 29Fh"
LINK
PORT = 280h - 29Fh
INIT = SOFTWARE(1) "I/O Range 280 - 29Fh"
INIT = PORTADR(282h) 00000011
INIT = PORTADR(288h) 00000000
INIT = PORTADR(288h) 00000001
CHOICE = "2A0 - 2BFh"
LINK
PORT = 2A0h - 2BFh
INIT = SOFTWARE(1) "I/O Range 2A0 - 2BFh"
INIT = PORTADR(2A2h) 00000011
INIT = PORTADR(2A8h) 00000000
INIT = PORTADR(2A8h) 00000001
CHOICE = "2C0 - 2DFh"
LINK
PORT = 2C0h - 2DFh
INIT = SOFTWARE(1) "I/O Range 2C0 - 2DFh"
INIT = PORTADR(2C2h) 00000011
INIT = PORTADR(2C8h) 00000000
INIT = PORTADR(2C8h) 00000001
CHOICE = "2E0 - 2FFh"
LINK
PORT = 2E0h - 2FFh
INIT = SOFTWARE(1) "I/O Range 2E0 - 2FFh"
INIT = PORTADR(2E2h) 00000011
INIT = PORTADR(2E8h) 00000000
INIT = PORTADR(2E8h) 00000001
CHOICE = "320 - 33Fh"
LINK
PORT = 320h - 33Fh
INIT = SOFTWARE(1) "I/O Range 320 - 33Fh"
INIT = PORTADR(322h) 00000011
INIT = PORTADR(328h) 00000000
INIT = PORTADR(328h) 00000001
CHOICE = "340 - 35Fh"
LINK
PORT = 340h - 35Fh
INIT = SOFTWARE(1) "I/O Range 340 - 35Fh"
INIT = PORTADR(342h) 00000011
INIT = PORTADR(348h) 00000000
INIT = PORTADR(348h) 00000001
CHOICE = "360 - 37Fh"
LINK
PORT = 360h - 37Fh
INIT = SOFTWARE(1) "I/O Range 360 - 37Fh"
INIT = PORTADR(362h) 00000011
INIT = PORTADR(368h) 00000000
INIT = PORTADR(368h) 00000001
CHOICE = "380 - 39Fh"
LINK
PORT = 380h - 39Fh
INIT = SOFTWARE(1) "I/O Range 380 - 39Fh"
INIT = PORTADR(382h) 00000011
INIT = PORTADR(388h) 00000000
INIT = PORTADR(388h) 00000001
CHOICE = "3A0 - 3BFh"
LINK
PORT = 3A0h - 3BFh
INIT = SOFTWARE(1) "I/O Range 3A0 - 3BFh"
INIT = PORTADR(3A2h) 00000011
INIT = PORTADR(3A8h) 00000000
INIT = PORTADR(3A8h) 00000001
SUBFUNCTION = "Interrupt (IRQ)"
CHOICE = "3"
LINK
INIT = Software(1) "Interrupt = 3"
IRQ = 3
CHOICE = "4"
LINK
INIT = Software(1) "Interrupt = 4"
IRQ = 4
CHOICE = "5"
LINK
INIT = Software(1) "Interrupt = 5"
IRQ = 5
CHOICE = "6"
LINK
INIT = Software(1) "Interrupt = 6"
IRQ = 6
CHOICE = "7"
LINK
INIT = Software(1) "Interrupt = 7"
IRQ = 7
CHOICE = "9"
LINK
INIT = Software(1) "Interrupt = 9"
IRQ = 9
CHOICE = "10"
LINK
INIT = Software(1) "Interrupt = 10"
IRQ = 10
CHOICE = "11"
LINK
INIT = Software(1) "Interrupt = 11"
IRQ = 11
CHOICE = "12"
LINK
INIT = Software(1) "Interrupt = 12"
IRQ = 12
CHOICE = "15"
LINK
INIT = Software(1) "Interrupt = 15"
IRQ = 15
SUBFUNCTION = "I/O or Memory Mapped"
HELP = "
This adapter can move data either by I/O or memory transfers.
Memory map transfers yield higher performance but may cause address
conflicts in DOS. It is recommended that client computers use I/O
transfers and server computers use memory map transfers. Please consult
the instructions on the HP Support Disk for the network driver.\n"
CHOICE = "I/O mapped"
; Removed 8-Jul-93 by whh: DISABLE = YES
LINK
INIT = Software(1) "I/O mapped"
CHOICE = "Memory mapped at C800h"
LINK
MEMORY = 2048
ADDRESS = 0C8000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at C800h"
CHOICE = "Memory mapped at CC00h"
LINK
MEMORY = 2048
ADDRESS = 0CC000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at CC00h"
CHOICE = "Memory mapped at D000h"
LINK
MEMORY = 2048
ADDRESS = 0D0000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at D000h"
CHOICE = "Memory mapped at D400h"
LINK
MEMORY = 2048
ADDRESS = 0D4000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at D400h"
CHOICE = "Memory mapped at D800h"
LINK
MEMORY = 2048
ADDRESS = 0D8000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at D800h"
CHOICE = "Memory mapped at DC00h"
LINK
MEMORY = 2048
ADDRESS = 0DC000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at DC00h"
CHOICE = "Memory mapped at E000h"
LINK
MEMORY = 2048
ADDRESS = 0E0000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at E000h"
CHOICE = "Memory mapped at E400h"
LINK
MEMORY = 2048
ADDRESS = 0E4000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at E400h"
CHOICE = "Memory mapped at E800h"
LINK
MEMORY = 2048
ADDRESS = 0E8000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at E800h"
CHOICE = "Memory mapped at EC00h"
LINK
MEMORY = 2048
ADDRESS = 0EC000h
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
INIT = Software(1) "Mem mapped at EC00h"
CHOICE = "Above 1 Meg, auto select"
HELP = "
The 'Above 1 Meg, auto select' choice will select an address above the
-end of
installed memory. Select Options - Auto Verify for this automatic selection
to be made. Then select View - Resources to view the address selected. Note
this address and set this address on the board using HPLANSET.EXE.\n"
LINK
MEMORY = 2048
INIT = Software(1) "Mem Map above 1 Meg"
ADDRESS = 0100000h - 0FFF800h STEP = 2048
WRITABLE = YES
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = "1832 18A0"
SUBFUNCTION = "Boot ROM"
HELP = "
A boot ROM may be installed to allow system boot from a network server.
\n\nIt is OK if the boot ROM address selected overlaps the address used for
memory-mapped I/O on the same board, but overlap is not allowed by this EISA
utility. A conflict notice occurs. If address overlap exists, use the
EISA utility to enable the boot ROM at the address and disable
memory-mapped I/O. Then, enable both boot ROM and memory-mapped I/O
using the board's
HPLANSET.EXE program.\n"
CHOICE = "DISABLE"
; Removed 8-Jul-93 by whh: DISABLE = YES
LINK
INIT = Software(1) "BOOT ROM DISABLED"
CHOICE = "8K at C000h"
FREE
MEMORY = 8K
ADDRESS = 0C0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C000h"
CHOICE = "8K at C400h"
FREE
MEMORY = 8K
ADDRESS = 0C4000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C400h"
CHOICE = "8K at C800h"
FREE
MEMORY = 8K
ADDRESS = 0C8000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C800h"
CHOICE = "8K at CC00h"
FREE
MEMORY = 8K
ADDRESS = 0CC000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at CC00h"
CHOICE = "8K at D000h"
FREE
MEMORY = 8K
ADDRESS = 0D0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D000h"
CHOICE = "8K at D400h"
FREE
MEMORY = 8K
ADDRESS = 0D4000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D400h"
CHOICE = "8K at D800h"
FREE
MEMORY = 8K
ADDRESS = 0D8000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D800h"
CHOICE = "8K at DC00h"
FREE
MEMORY = 8K
ADDRESS = 0DC000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at DC00h"
CHOICE = "8K at E000h"
FREE
MEMORY = 8K
ADDRESS = 0E0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at E000h"
CHOICE = "12K at C000h"
LINK
MEMORY = 12K
ADDRESS = 0C0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C000h"
CHOICE = "12K at C400h"
FREE
MEMORY = 12K
ADDRESS = 0C4000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C400h"
CHOICE = "12K at C800h"
FREE
MEMORY = 12K
ADDRESS = 0C8000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C800h"
CHOICE = "12K at CC00h"
FREE
MEMORY = 12K
ADDRESS = 0CC000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at CC00h"
CHOICE = "12K at D000h"
FREE
MEMORY = 12K
ADDRESS = 0D0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D000h"
CHOICE = "12K at D400h"
FREE
MEMORY = 12K
ADDRESS = 0D4000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D400h"
CHOICE = "12K at D800h"
FREE
MEMORY = 12K
ADDRESS = 0D8000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D800h"
CHOICE = "12K at DC00h"
FREE
MEMORY = 12K
ADDRESS = 0DC000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at DC00h"
CHOICE = "12K at E000h"
FREE
MEMORY = 12K
ADDRESS = 0E0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at E000h"
CHOICE = "16K at C000h"
LINK
MEMORY = 16K
ADDRESS = 0C0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C000h"
CHOICE = "16K at C400h"
FREE
MEMORY = 16K
ADDRESS = 0C4000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C400h"
CHOICE = "16K at C800h"
FREE
MEMORY = 16K
ADDRESS = 0C8000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at C800h"
CHOICE = "16K at CC00h"
FREE
MEMORY = 16K
ADDRESS = 0CC000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at CC00h"
CHOICE = "16K at D000h"
FREE
MEMORY = 16K
ADDRESS = 0D0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D000h"
CHOICE = "16K at D400h"
FREE
MEMORY = 16K
ADDRESS = 0D4000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D400h"
CHOICE = "16K at D800h"
FREE
MEMORY = 16K
ADDRESS = 0D8000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at D800h"
CHOICE = "16K at DC00h"
FREE
MEMORY = 16K
ADDRESS = 0DC000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at DC00h"
CHOICE = "16K at E000h"
FREE
MEMORY = 16K
ADDRESS = 0E0000h
WRITABLE = NO
MEMTYPE = OTH
SIZE = WORD
CACHE = NO
SHARE = NO
INIT = Software(1) "BOOT ROM at E000h"
