;
; Hewlett-Packard EtherTwist Adapter Card/8 Version 2.00
; Configuration file version 2.00
; !HWP1820.CFG 10-02-1991
;
; (C)Copyright Hewlett-Packard Co., 1989-1991
; All Rights Reserved.
;
BOARD
ID = "hwp1820"
NAME = "HP EtherTwist Adapter Card/8 (27245-60002)"
MFR = "Hewlett-Packard Co."
CATEGORY = "NET"
SLOT = ISA8
LENGTH = 110
COMMENTS = "The HP EtherTwist PC adapter card is a type 10BASE-T
compatible local area networking card."
SWITCH(1) = 16
NAME = "LB, ADDR"
STYPE = ROTARY
REVERSE = YES
LABEL = LOC(1-16) "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "A" "B" "C" "D" "E" "F"
FACTORY = LOC(1-16) 1000000000000000
COMMENTS = "Switch 1 selects both Linkbeat (LB),\n
ON or OFF, and I/O Base Address (ADDR)\n
according to the table below:\n\n
Pos LB ADDR\n\n
0 ON 300h (Default)\n
1 ON 340h\n
2 ON 320h\n
3 ON 300h\n
4 ON 2C0h\n
5 ON 280h\n
6 ON 240h\n
7 ON 200h\n
8 OFF 300h\n
9 OFF 340h\n
A OFF 320h\n
B OFF 300h\n
C OFF 2C0h\n
D OFF 280h\n
E OFF 240h\n
F OFF 200h\n"
SOFTWARE(1) = "
Your network software may ask you for this data:"
FUNCTION = "EtherTwist Adapter Card/8 (27245-60002)"
TYPE = "NET"
CONNECTION = "One modular 8-pin LAN connector, and\n
one modular 6-pin phone connector"
SUBFUNCTION = "Linkbeat, I/O Base Address"
CHOICE = "ON, 300h"
LINK
INIT = SWITCH(1) LOC(1-16) 1000000000000000
INIT = SOFTWARE(1) "I/O Base=300h"
PORT = 300h
CHOICE = "ON, 300h - (Duplicates prior Choice)"
LINK
INIT = SWITCH(1) LOC(1-16) 0001000000000000
INIT = SOFTWARE(1) "I/O Base=300h"
PORT = 300h
CHOICE = "ON, 340h"
LINK
INIT = SWITCH(1) LOC(1-16) 0100000000000000
INIT = SOFTWARE(1) "I/O Base=340h"
PORT = 340h
CHOICE = "ON, 240h"
LINK
INIT = SWITCH(1) LOC(1-16) 0000001000000000
INIT = SOFTWARE(1) "I/O Base=240h"
PORT = 240h
CHOICE = "ON, 200h"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000100000000
INIT = SOFTWARE(1) "I/O Base=200h"
PORT = 200h
CHOICE = "ON, 280h - Don't use with Novell Netware"
LINK
INIT = SWITCH(1) LOC(1-16) 0000010000000000
INIT = SOFTWARE(1) "I/O Base=280h"
PORT = 280h
CHOICE = "ON, 2C0h - Don't use with Novell Netware"
LINK
INIT = SWITCH(1) LOC(1-16) 0000100000000000
INIT = SOFTWARE(1) "I/O Base=2C0h"
PORT = 2C0h
CHOICE = "ON, 320h - Don't use with Novell Netware or HP Vectra CS"
LINK
INIT = SWITCH(1) LOC(1-16) 0010000000000000
INIT = SOFTWARE(1) "I/O Base=320h"
PORT = 320h
CHOICE = "OFF, 300h"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000010000000
INIT = SOFTWARE(1) "I/O Base=300h"
PORT = 300h
CHOICE = "OFF, 300h - (Duplicates prior Choice)"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000000010000
INIT = SOFTWARE(1) "I/O Base=300h"
PORT = 300h
CHOICE = "OFF, 340h"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000001000000
INIT = SOFTWARE(1) "I/O Base=340h"
PORT = 340h
CHOICE = "OFF, 240h"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000000000010
INIT = SOFTWARE(1) "I/O Base=240h"
PORT = 240h
CHOICE = "OFF, 200h"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000000000001
INIT = SOFTWARE(1) "I/O Base=200h"
PORT = 200h
CHOICE = "OFF, 280h - Don't use with Novell Netware"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000000000100
INIT = SOFTWARE(1) "I/O Base=280h"
PORT = 280h
CHOICE = "OFF, 2C0h - Don't use with Novell Netware"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000000001000
INIT = SOFTWARE(1) "I/O Base=2C0h"
PORT = 2C0h
CHOICE = "OFF, 320h - Don't use with Novell Netware or HP Vectra CS"
LINK
INIT = SWITCH(1) LOC(1-16) 0000000000100000
INIT = SOFTWARE(1) "I/O Base=320h"
PORT = 320h
SUBFUNCTION = "Interrupt Channel (IRQ)"
CHOICE = "3"
LINK
INIT = Software(1) "IRQ=3"
IRQ = 3
CHOICE = "4"
LINK
INIT = Software(1) "IRQ=4"
IRQ = 4
CHOICE = "5"
LINK
INIT = Software(1) "IRQ=5"
IRQ = 5
CHOICE = "7"
LINK
INIT = Software(1) "IRQ=7"
IRQ = 7
