;Configuration file for AMI EISA system board,series 25
;BOARD statement block.

BOARD
	ID = "AMI2509"
	NAME = "AMI ENTERPRISE EISA system board"
	MFR = "AMI,GA,USA"
	CATEGORY = "SYS"
	SLOT = EMB(0)
	READID = YES
	AMPERAGE = 7100
	COMMENTS = "This AMI EISA system board has an on-board floppy
		    controller. SLOT(3) is available as ISA8, if  AMI
		    proprietary 32 bit memory card is absent."

;System statement block.It describes the slot types present in the system.
	
SYSTEM
	NONVOLATILE = 8K
	AMPERAGE = 43100
	SLOT(1) = EISA(1)
		LENGTH = 341
		SKIRT = YES
		BUSMASTER = YES
	SLOT(2) = EISA(2)
		LENGTH = 341
		SKIRT = YES
		BUSMASTER = YES
	SLOT(3) = ISA8(3),"AMIMEM"
		LENGTH = 341
		SKIRT = NO
	SLOT(4) = EISA(4)
		LENGTH = 341
		SKIRT = YES
		BUSMASTER = YES
	SLOT(5) = EISA(5)
		LENGTH = 341
		SKIRT = YES
		BUSMASTER = YES
	SLOT(6) = EISA(6)
		LENGTH = 341
		SKIRT = YES
		BUSMASTER = YES
	SLOT(7) = EISA(7)
		LENGTH = 341
		SKIRT = YES
		BUSMASTER = YES
	SLOT(8) = ISA8(8)
		LENGTH = 341
		SKIRT = YES

JUMPER(1) = 2
	NAME = "J18"
	JTYPE = INLINE
	VERTICAL = YES
	REVERSE = NO
	LABEL = LOC(1 2 3) "1" "2" "3"
	INITVAL = LOC(1^2 2^3)10
	FACTORY = LOC(1^2 2^3)10
	COMMENTS = "Jumper should be set to 1^2 position for AT-type floppy
		    drive interface. It should be  set  to 2^3 position for
		    PS/2-type floppy drive interface."
	HELP = "Factory setting is for 1^2 position."

SWITCH(1) = 2
	NAME = "SW1"
	STYPE = DIP
	VERTICAL = YES
	REVERSE = NO
	LABEL = LOC(2 1) "Color/Mono" "Diag"
	INITVAL = LOC(2 1) 00
	FACTORY = LOC(2 1) 00
	COMMENTS = "Diag Switch should be set to OFF position for normal mode
		   of operation . For  POST diagnsotics loop mode , the  Diag
		   switch should be set to ON position . Color / Mono  switch
		   should  be  set to  OFF  position for  monochrome  display
		   adapters (MDA) . For color graphics adapter (CGA),  color/
		   mono switch should be set to  ON  position."
	HELP = "Factory settings are for OFF positions.
		SW1 located at upper right corner of the board."

GROUP = "EISA System information"
	TYPE = "ISA"
FUNCTION = "Slot mapping information"
	SHOW = NO
 	CHOICE = "Slot mapping tables"
		SUBTYPE = "MAP"
		FREEFORM = 30,61h,62h,03h,64h,65h,66h,67h,08h,
			      0E0h,0E0h,0E0h,0E0h,0E0h,0E0h,0E0h,
			      1,2,7,4,5,6,0,0,
			      0,0,0,0,0,0,0
ENDGROUP