BOARD
	ID="ADP7770"
	NAME="Embedded Adaptec AIC-7770 SCSI Controller"
	MFR="ADAPTEC, Inc."
	CATEGORY="MSD"
	SLOT=EISA
	LENGTH=330
	AMPERAGE=1000
	SKIRT=NO
	READID=YES
	BUSMASTER=50
	IOCHECK=VALID
	DISABLE=SUPPORTED
  	COMMENTS="Embedded AIC-7770 Configuration File Ver. 2.10 Custom Beta 4.  
    NOTE: This is a customized version of the AIC-7770 EISA configuration 
    file for use with the embedded AIC-7770 SCSI controller on certain
    X-Series system boards. It should not be used with other system boards."

IOPORT(1)=0zc87h                        ;Host configuration definition
	INITVAL = 0X00X00X                  ; PwrDwn mode; IRQ mode; Reset;

IOPORT(2)=0zc5dh                        ;Host configuration definition
	INITVAL = XXXXXX00                  ; Data FIFO Thrshld; Bus release time

IOPORT(3)=0zc5ah                        ;SCSI configuration
	SIZE = WORD
	INITVAL = 0XXXXXXX0XXXXXXX

IOPORT(4)=0zc5ch                        ;Interrupt definition
	INITVAL = X000XXXX                                      

IOPORT(5)=0zc5fh                        ;Host configuration definition
    INITVAL = 00XXXXXX                  ;used by !adp7771.cfg

IOPORT(6)=0zc84h                        ;SCSI Enable/Disable 
	INITVAL = rrrrrrrX                                      

IOPORT(7)=0zc5fh                        ;Host configuration definition
    INITVAL = rrrrXrrr                  ;bit 3 = Channel Select

FUNCTION = "AIC-7770 Chip Reset"
	SHOW = NO
		CHOICE = ""
			LINK
			INIT = IOPORT(1) LOC(0) 1B
			INIT = IOPORT(5) LOC(3) 0B

INCLUDE  = "ADP7770.OVL"