;
;       $Revision:   1.9  $
;       $Date:   16 Nov 1988 10:11:56  $
;
; ***************************************************************************
; * Copyright (C) 1988 by Phoenix Technologies Ltd.  This program           *
; * contains proprietary and confidential information.  All rights reserved *
; * except as may be permitted by prior written consent.                    *
; ***************************************************************************

AdapterId 0000h

AdapterName  "Internal Options"

; This is irrelevant but must be present for the parser
NumBytes 0

; ***********************************************************
NamedItem
        Cmos 0h MemInst
        Prompt  "Installed memory"
        Choice "16384 KB (16.0 MB)" pos[0]=XXXXXXXXb
        Help
" This is the amount of physically installed memory. It cannot be changed in this
 program."

; ***********************************************************
NamedItem
        Cmos 0h MemAvail
        Prompt  "Available memory"
        Choice "16384 KB (16.0 MB)" pos[0]=XXXXXXXXb
        Help
" This is the amount of memory that passed parity checking during power-on.
 It cannot be changed in this program."

; ***********************************************************
NamedItem
        Cmos 10h Diskette
        Prompt  "Disk Drive A Type"
        Choice "1.44MB 3.5  Inch" pos[0]=0100XXXXb
        Choice "1.2 MB 5.25 Inch" pos[0]=0010XXXXb
        Choice "720 KB 3.5  Inch" pos[0]=0011XXXXb
        Choice "360 KB 5.25 Inch" pos[0]=0001XXXXb
        Choice "Not Installed"    pos[0]=0000XXXXb
        Help
"Select either: 1.44MB(720KB) 3.5 Inch, 1.2MB(360KB) 5.25 Inch or Not
Installed for drive A. Use the F5 (Previous) or F6 (Next) keys to change
the drive type."

; ***********************************************************
NamedItem
        Cmos 10h
        Prompt  "Disk Drive B Type"
        Choice "1.44MB 3.5  Inch" pos[0]=xxxx0100b
        Choice "1.2 MB 5.25 Inch" pos[0]=xxxx0010b
        Choice "720 KB 3.5  Inch" pos[0]=xxxx0011b
        Choice "360 KB 5.25 Inch" pos[0]=xxxx0001b
        Choice "Not Installed"    pos[0]=xxxx0000b
        Help
"Select either: 1.44MB(720KB) 3.5 Inch, 1.2MB(360KB) 5.25 Inch or Not
Installed for drive B. Use the F5 (Previous) or F6 (Next) keys to change
the drive type."

; ***********************************************************
NamedItem
        Cmos 14h Math
        Prompt "Math Coprocessor"
        Choice "NPX Not Installed" pos[0]=XXXXXX0Xb
        Choice "NPX Installed"     pos[0]=XXXXXX1Xb
        Help
"Your computer has a built in math coprocessor socket to hold a math
coprocessor chip. It can be changed prior to its physical installation
and detection."

;******************************************************************
; Extended CMOS 700h - BIOS information.  ######## 1989 7 19
;        Bit 4,3,2
;               000   VGA
;               001   CGA
;               010   MDA
;               011   HGA
;               100   EGA
;
;******************************************************************
NamedItem
        ECmos 700h
        Prompt "VGA Mode Locking"
        Choice "VGA "  pos[0]=XXX000XXb
        Choice "CGA "  pos[0]=XXX001XXb
        Choice "MDA "  pos[0]=XXX010XXb
        Choice "HGA "  pos[0]=XXX011XXb
        Choice "EGA "  pos[0]=XXX100XXb
        Help
"Select a video type that matches the installed video adapter card."

; ******************************************************************
; Cmos offset 31 (System Board POS 2)
; Bit 3    - 0 = Serial port 1 enabled.
;          - 1 = Serial port 2 enabled.
; Bit 2    - 0 = Serial port disabled.
;          - 1 = Serial port enabled.
; Bit 0    - 0 = Override bits 4,2,1 to disable the ports.
;          - 1 = Enable the state of bits 4,2,1.
; ******************************************************************
NamedItem
        Cmos 31h Board
        Prompt "Serial Port"
        Choice "SERIAL_1"    pos[0]=XXXX1111b io 03f8h-03ffh  int 4
        Choice "SERIAL_2"    pos[0]=XXXX0111b io 02f8h-02ffh  int 3
        Choice "Disabled"    pos[0]=XXXXX011b
        Help
"The built-in serial port can be assigned as Serial port 1, Serial port 2
, or disabled. Use the F5 (Previous) or F6 (Next) keys to change the serial
 port."


; ******************************************************************
; Cmos offset 31 (System Board POS 2)
; Bit 7    - 0 = 8 bit bidrectional mode.
;            1 = bidirectional mode disabled.
; Bit 6,5  - 0,0 = Parallel 1
;          - 0,1 = Parallel 2
;          - 1,0 = Parallel 3
;          - 1,1 = Reserved
; Bit 4    - 0 = Parallel port disabled.
;          - 1 = Parallel port enabled.
; Bit 0    - 0 = Override bits 4,2,1 to disable the ports and diskette.
;          - 1 = Enable the state of bits 4,2,1.
; ******************************************************************
NamedItem
        Cmos 31h
        Prompt "Parallel Port"
        Choice "PARALLEL_1"               pos[0]=1001XX11b io 03bch-03beh int 7
        Choice "PARALLEL_2"               pos[0]=1011XX11b io 0378h-037ah int 7
        Choice "PARALLEL_3"               pos[0]=1101XX11b io 0278h-027ah int 7
        Choice "PARALLEL_1 bidirectional" pos[0]=0001XX11b io 03bch-03beh int 7
        Choice "PARALLEL_2 bidirectional" pos[0]=0011XX11b io 0378h-037ah int 7
        Choice "PARALLEL_3 bidirectional" pos[0]=0101XX11b io 0278h-027ah int 7
        Choice "Disabled"                 pos[0]=XXX0XX11b
        Help
"The built-in parallel port can be assigned as Parallel port 1, 2
 or 3 or disabled entirely. In addition the port can be configured as an
 8-bit bidirectional interface. Use the F5 (Previous) or F6 (Next) keys to
 change the parallel port."

; Reserve a group of resources for the system board
FixedResources
        pos[0]=xxxxxxxxb

; DMA, Keyboard, CMOS/NMI, Math Coproc, Interrupt Controller, etc
        IO 01h-0108h
; Video
           03c0h-03dfh
; Diskette
           03f0h-03f7h

; Diskette Arbitration
        ARB 2