BOARD
	ID = "TCM5094"
	NAME = "3Com 3C509-Combo Network Adapter"
	MFR = "3Com Corporation"
	CATEGORY = "NET"
	LENGTH = 160
	READID = yes
	AMPERAGE = 400
	DISABLE = supported
	HELP = 
	   "The 3Com 3C509-Combo network adapter
	   connects your personal
	   computer to an 802.3 local area network.\n
	   \n
	   Refer to the adapter guide for
	   additional information on configuring
	   this adapter."

; FUNCTION = "I/O Address Range"
;       SHOW = NO
;       HELP =
;           "This function is a placeholder for the I/O ports resource."
;       CHOICE = ""
;           LINK
;               PORT = 0z0h-0zfh


FUNCTION = "I/O Address"
	CHOICE = "300H-30FH"
		FREE
		PORT = 300H-30FH
	CHOICE = "200H-2F0H"
		FREE
		PORT = 200H-300H STEP=16
	CHOICE = "310H-3E0H"
		FREE
		PORT = 310H-3E0H STEP=13 COUNT=16

FUNCTION = "Interrupt Request Level"
	HELP =
	   "Determines the interrupt request level that is used by the adapter."
	CHOICE = "10"
		LINK
		    IRQ = 10
	CHOICE = "3"
		LINK
		    IRQ = 3
	CHOICE = "5"
		LINK
		    IRQ = 5
	CHOICE = "7"
		LINK
		    IRQ = 7
	CHOICE = "9"
		LINK
		    IRQ = 9
	CHOICE = "11"
		LINK
		    IRQ = 11
	CHOICE = "12"
		LINK
		    IRQ = 12
	CHOICE = "15"
		LINK
		    IRQ = 15

FUNCTION = "Boot PROM Size"
	HELP = 
	   "Specifies the size of the boot PROM that
	   is installed on the adapter for remote
	   system booting over the network.\n
	   \n
	   Disabled  -  No boot PROM is installed.\n
	   \n
	   8K  -  An 8K boot PROM is installed.\n
	   \n
	   16K  -  A 16K boot PROM is installed.\n
	   \n
	   32K  -  A 32K boot PROM is installed."
	CHOICE = "Disabled"
		LINK
	CHOICE = "8K"
		COMBINE
			MEMORY = 8k
				ADDRESS = 0c2000h-0de000h  STEP = 8k
				MEMTYPE = oth
				WRITABLE = no
				SIZE = word
				DECODE = 20
	CHOICE = "16K"
		COMBINE
			MEMORY = 16k
				ADDRESS = 0c0000h-0dc000h  STEP = 16k
				MEMTYPE = oth
				WRITABLE = no
				SIZE = word
				DECODE = 20
	CHOICE = "32K"
		COMBINE
			MEMORY = 32k
				ADDRESS = 0c0000h-0d8000h  STEP = 32k
				MEMTYPE = oth
				WRITABLE = no
				SIZE = word
				DECODE = 20

FUNCTION = "Transceiver Type"
	HELP = 
	   "Specifies which of the adapter's
	   transceivers is being used.\n
	   \n
	   On-board coax  -  The on-board
	   transceiver (BNC connector) on the
	   adapter is being used.\n
	   \n
	   On-board TP  -  The on-board transceiver
	   (RJ-45 connector) on the the adapter is
	   being used.\n
	   \n
	   External  -  An external transceiver
	   (AUI connector) is being used."
	CHOICE = "On-board coax"
		LINK
	CHOICE = "On-board TP"
		LINK
	CHOICE = "External"
		LINK

; %VER 3C509-Combo EISA Configuration File v2.0a