AdapterID 0FDDEh
AdapterName "Enhanced 80386 Memory Expansion Adapter w/ROM"
Numbytes 4
FixedResources
POS[0]=0xxxx011b
POS[1]=xxxxxxxxb
POS[2]=xxxxxxxxb
POS[3]=11xxxxxxb Exec
NamedItem Prompt "ROM Address Range"
Choice "C8000-C9FFF" pos[0]=x0100xxxb mem 0C8000h - 0C9FFFh
Choice "CA000-CBFFF" pos[0]=x0101xxxb mem 0CA000h - 0CBFFFh
Choice "CC000-CDFFF" pos[0]=x0110xxxb mem 0CC000h - 0CDFFFh
Choice "CE000-CFFFF" pos[0]=x0111xxxb mem 0CE000h - 0CFFFFh
Choice "D0000-D1FFF" pos[0]=x1000xxxb mem 0D0000h - 0D1FFFh
Choice "D2000-D3FFF" pos[0]=x1001xxxb mem 0D2000h - 0D3FFFh
Choice "D4000-D5FFF" pos[0]=x1010xxxb mem 0D4000h - 0D5FFFh
Choice "D6000-D7FFF" pos[0]=x1011xxxb mem 0D6000h - 0D7FFFh
Choice "D8000-D9FFF" pos[0]=x1100xxxb mem 0D8000h - 0D9FFFh
Choice "DA000-DBFFF" pos[0]=x1101xxxb mem 0DA000h - 0DBFFFh
Choice "DC000-DDFFF" pos[0]=x1110xxxb mem 0DC000h - 0DDFFFh
Choice "DE000-DFFFF" pos[0]=x1111xxxb mem 0DE000h - 0DFFFFh
Choice "Disabled" pos[0]=x0000xxxb
Help
"This assignment need only be changed if it is in conflict
with another card. Conflicting assignments are marked
with an asterisk. If there are multiple Enhanced 80386
Memory Expansion Adapters w/ROM installed in the system,
only one is required to have a ROM address. The other
Enhanced Adapters can have the Rom Address Range set to
Disabled by using the Change Configuration utility."
NamedItem Prompt "Enabled Memory"
Choice "Run Set Configuration" pos[3]=xx111111b
Choice "0KB (0MB)" pos[3]=xx000000b
Choice "1024KB (1.0MB)" pos[3]=xx000001b
Choice "2048KB (2.0MB)" pos[3]=xx000010b
Choice "3072KB (3.0MB)" pos[3]=xx000011b
Choice "4096KB (4.0MB)" pos[3]=xx000100b
Choice "5120KB (5.0MB)" pos[3]=xx000101b
Choice "6144KB (6.0MB)" pos[3]=xx000110b
Choice "7168KB (7.0MB)" pos[3]=xx000111b
Choice "8192KB (8.0MB)" pos[3]=xx001000b
Choice "9216KB (9.0MB)" pos[3]=xx001001b
Choice "10240KB (10.0MB)" pos[3]=xx001010b
Choice "11264KB (11.0MB)" pos[3]=xx001011b
Choice "12288KB (12.0MB)" pos[3]=xx001100b
Choice "13312KB (13.0MB)" pos[3]=xx001101b
Choice "14336KB (14.0MB)" pos[3]=xx001110b
Choice "15360KB (15.0MB)" pos[3]=xx001111b
Choice "16384KB (16.0MB)" pos[3]=xx010000b
Help
"This item is used to allow the amount of enabled memory
on the memory card to be displayed when the configuration
is viewed. Modifying this field does not affect the amount
of enabled memory on the memory card.
This entry shows the amount of memory that can be enabled
on the adapter. Since the total system memory cannot exceed
16 megs, some of this memory may not be enabled.
If 'Run Set Configuration' appears in the display,
Set Configuration must be run again to re-display
the amount of enabled memory."
