AdapterID 0DDFFh

AdapterName  "ESDI Fixed Disk Controller"

NumBytes 2

fixedresources
        pos[1]=00XXXXXXb
        pos[0]=XXXXXX0Xb
        io 3510h-3517h
        int 0eh

nameditem
        Prompt  "Adapter Memory Location"
          Choice "Segment C800"
            pos[1]=XXXX0010b
            mem 0c8000h-0cbfffh
          Choice "Segment CC00"
            pos[1]=XXXX0011b
            mem 0cc000h-0cffffh
          Choice "Segment D000"
            pos[1]=XXXX0100b
            mem 0d0000h-0d3fffh
          Choice "Segment D400"
            pos[1]=XXXX0101b
            mem 0d4000h-0d7fffh
          Choice "Segment D800"
            pos[1]=XXXX0110b
            mem 0d8000h-0dbfffh
          Choice "Segment DC00"
            pos[1]=XXXX0111b
            mem 0dc000h-0dffffh
          Choice  "ROM Disabled"
            pos[1]=XXXX1XXXb
        Help
        "To configure this adapter you must choose the memory location the
         adapter will use for it's BIOS ROM.  There are six memory locations
         that can be selected.  Under normal circumstances, select <Segment
         C800>."

nameditem
        Prompt  "DMA Arbitration Level"
          Choice  "Level 5"
            pos[0]=XX0101XXb
            arb 5
          Choice  "Level 6"
            pos[0]=XX0110XXb
            arb 6
          Choice  "Level 7"
            pos[0]=XX0111XXb
            arb 7
          Choice  "Level 0"
            pos[0]=XX0000XXb
            arb 0
          Choice  "Level 1"
            pos[0]=XX0001XXb
            arb 1
          Choice  "Level 3"
            pos[0]=XX0011XXb
            arb 3
          Choice  "Level 4"
            pos[0]=XX0100XXb
            arb 4
        Help
        "This selects the DMA channel the adapter will use to transfer data.
         Under normal circumstances, select <Level 5>."

nameditem
        Prompt  "DMA Burst Length"
          Choice  " 8 Word Burst"
            pos[1]=XX01XXXXb
          Choice  "16 Word Burst"
            pos[1]=XX10XXXXb
          Choice  "24 Word Burst"
            pos[1]=XX11XXXXb
          Choice  "Burst Disabled"
            pos[1]=XX00XXXXb
        Help
        "DMA transfer burst length.  This is the maximum number of words that
         the adapter will transfer in a single DMA transfer.  Under normal
         circumstances, select <8 Word Burst>."

nameditem
        Prompt  "Fairness On/Off"
          Choice  "On"
            pos[0]=X1XXXXXXb
          Choice  "Off"
            pos[0]=X0XXXXXXb
        Help
        "Bus Arbitration Fairness.  This controls whether the adapter will
         release control of the bus when it has been using it exclusively.
         Under normal circumstances, select <On>."