;
; Version: 1.00
;
; (C) Copyright International Business Machines Corporation 1993
; All Rights Reserved
;
AdapterId 08FA0h
AdapterName "IBM LANStreamer MC 32 Adapter "
NumBytes 4
FixedResources
pos[0]=1xxxxxxxb
pos[2]=xxxx0xx1b
;pos 2 = set preempt time=max, enable busmaster mode
Begin NoDMA
NamedItem Prompt "Adapter Data Rate"
Choice "16 Mbps" pos[1]=1xxxxxxxb
Choice " 4 Mbps" pos[1]=0xxxxxxxb
Help "Adapter Data Rate: This Token-Ring Network Adapter
can operate at two different data rates: 4 Mbps or 16 Mbps.
The adapter data rate MUST be set to the rate of the
Token-Ring Network LAN segment to which you are connecting the
adapter. The assignment for this data rate can be changed by
selecting 'Change Configuration' and then using the
F5=Previous and the F6=Next keys."
NamedItem Prompt "Adapter Media Type Selection"
Choice "STP" pos[2]=0xxxxxxxb
Choice "UTP" pos[2]=1xxxxxxxb
Help "Media Type Selection: This Token-Ring Network Adapter
supports two media types, STP and UTP.
The media type selected MUST be cable connected to
the token ring. If not the adapter will exhibit a
LOBE MEDIA FAILURE.
The assignment for the media type can be changed by
selecting 'Change Configuration' and then using the
F5=Previous and the F6=Next keys."
NamedItem Prompt "Adapter I/O address Range"
Choice "1C00-1CFF" pos[0]=x000111xb io 01C00h-01CFFh
Choice "2000-20FF" pos[0]=x001000xb io 02000h-020FFh
Choice "2400-24FF" pos[0]=x001001xb io 02400h-024FFh
Choice "2800-28FF" pos[0]=x001010xb io 02800h-028FFh
Choice "2C00-2CFF" pos[0]=x001011xb io 02C00h-02CFFh
Choice "3000-30FF" pos[0]=x001100xb io 03000h-030FFh
Choice "3400-34FF" pos[0]=x001101xb io 03400h-034FFh
Choice "3800-38FF" pos[0]=x001110xb io 03800h-038FFh
Choice "3C00-3CFF" pos[0]=x001111xb io 03C00h-03CFFh
Choice "4000-40FF" pos[0]=x010000xb io 04000h-040FFh
Choice "4400-44FF" pos[0]=x010001xb io 04400h-044FFh
Choice "4800-48FF" pos[0]=x010010xb io 04800h-048FFh
Choice "4C00-4CFF" pos[0]=x010011xb io 04C00h-04CFFh
Choice "5000-50FF" pos[0]=x010100xb io 05000h-050FFh
Choice "5400-54FF" pos[0]=x010101xb io 05400h-054FFh
Choice "5800-58FF" pos[0]=x010110xb io 05800h-058FFh
Choice "5C00-5CFF" pos[0]=x010111xb io 05C00h-05CFFh
Choice "6000-60FF" pos[0]=x011000xb io 06000h-060FFh
Choice "FC00-FCFF" pos[0]=x111111xb io 0FC00h-0FCFFh
Help "The Adapter I/O address field is a six bit field that selects
the I/O address of the adapter. For Micro Channel I/O
cycles, this Token-Ring Network adapter is selected when the Micro
Channel I/O address is within a 256 byte region. If more than
one adapter in your computer is used, each adapter must be
assigned a separate I/O address range. The assignment for the
I/O address range can be changed by selecting 'Change Configuration'
and then using the F5=Previous and the F6=Next keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and the I/O address range
must be changed. If a conflict continues to exist, you may
need to change the assignments for other options that are in
your computer to resolve the conflict."
NamedItem Prompt "Interrupt Level"
Choice "Interrupt 3" pos[1]=xx01xxxxb int 03h
Choice "Interrupt 2" pos[1]=xx00xxxxb int 02h
Choice "Interrupt 10" pos[1]=xx10xxxxb int 0Ah
Choice "Interrupt 11" pos[1]=xx11xxxxb int 0Bh
Help "INTERRUPT LEVEL: This Token-Ring Network Adapter can
operate on one of four interrupt levels: 2, 3, 10 or 11.
The preferred interrupt level is 3, but the adapter can
operate on any of the four levels if necessary.
The assignment for the interrupt level can be changed by
selecting 'Change Configuration' and then using the
F5=Previous and the F6=Next keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and must be changed."
NamedItem Prompt "Fairness/Streaming Data Select"
Choice "Fairness ON/Streaming ON" pos[3]=xx10xxxxb
Choice "Fairness ON/Streaming OFF" pos[3]=xx00xxxxb
Choice "Fairness OFF/Streaming ON" pos[3]=xx11xxxxb
Choice "Fairness OFF/Streaming OFF" pos[3]=xx01xxxxb
Help "FAIRNESS/STREAMING DATA: This Token-Ring Network Adapter can operate
with or without arbitration fairness and with or without
Data Streaming. This selection
can be changed by selecting 'Change Configuration'
and then using the F5=Previous and the F6=Next keys."
NamedItem Prompt "Arbitration Level"
Choice "Level 1" pos[3]=xxxx0001b arb 01h
Choice "Level 2" pos[3]=xxxx0010b arb 02h
Choice "Level 3" pos[3]=xxxx0011b arb 03h
; Choice "Level 4" pos[3]=xxxx0100b arb 04h
Choice "Level 5" pos[3]=xxxx0101b arb 05h
Choice "Level 6" pos[3]=xxxx0110b arb 06h
Choice "Level 7" pos[3]=xxxx0111b arb 07h
Choice "Level 8" pos[3]=xxxx1000b arb 08h
Choice "Level 9" pos[3]=xxxx1001b arb 09h
Choice "Level A" pos[3]=xxxx1010b arb 0Ah
Choice "Level B" pos[3]=xxxx1011b arb 0Bh
Choice "Level C" pos[3]=xxxx1100b arb 0Ch
Choice "Level D" pos[3]=xxxx1101b arb 0Dh
Choice "Level E" pos[3]=xxxx1110b arb 0Eh
Help "ARBITRATION LEVEL: This Token-Ring Network Adapter
can operate on one of thirteen arbitration levels: 1, 2, 3 or
5 thru E. If more than one adapter is used in your computer,
each adapter must be assigned a separate arbitration level.
Assignment for the arbitration level can be changed by
selecting 'Change Configuration' and then using the F5=Previous
and the F6=Next keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and the arbitration level
must be changed. If a conflict continues to exist, you may
need to change the assignments for other adapters or options
that are in your computer to resolve the conflict."
NamedItem Prompt "Remote Program Load Address Range"
Choice "Disabled" pos[1]=xxxx0000b
Choice "C0000-C3FFF" pos[1]=xxxx0001b mem 0C0000h-0C3FFFh
Choice "C4000-C7FFF" pos[1]=xxxx0011b mem 0C4000h-0C7FFFh
Choice "C8000-CBFFF" pos[1]=xxxx0101b mem 0C8000h-0CBFFFh
Choice "CC000-CFFFF" pos[1]=xxxx0111b mem 0CC000h-0CFFFFh
Choice "D0000-D3FFF" pos[1]=xxxx1001b mem 0D0000h-0D3FFFh
Choice "D4000-D7FFF" pos[1]=xxxx1011b mem 0D4000h-0D7FFFh
Choice "D8000-DBFFF" pos[1]=xxxx1101b mem 0D8000h-0DBFFFh
Choice "DC000-DFFFF" pos[1]=xxxx1111b mem 0DC000h-0DFFFFh
Help "This Token-Ring Network adapter Remote Program Load
(RPL) ROM is relocatable within Micro Channel memory space.
The adapter RPL ROM may be located on any 16K boundary
from hex 000C 000 to 000D C000.
The address assignment can be changed by selecting
'Change Configuration' and then using the
F5=Previous and the F6=Next keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and must be changed."
NamedItem Prompt "Parity Enable/Monitor Feedback"
Choice "Parity OFF/Monitor OFF" pos[2]=xxxxx00xb
Choice "Parity ON/Monitor OFF " pos[2]=xxxxx10xb
Choice "Parity OFF/Monitor ON " pos[2]=xxxxx01xb
Choice "Parity ON/Monitor ON" pos[2]=xxxxx11xb
Help "Micro Channel Parity Enable/Monitor Slave devices feedback signal:
This Token-Ring Adapter
provides the capability of generating and checking data and
address parity.
The assignment for parity checking can be changed by selecting
'Change Configuration' and then using the F5=Previous and the
F6=Next keys. This adapter also provides the capability
of monitoring slave device's Selected Feedback Return
Exception signals during DMA operations.
The assignment can be changed by selecting 'Change Configuration'
and then using the F5=Previous and the F6=Next keys."
End
