AdapterId 070CEh
AdapterName "Video Capture Adapter/A with PAL"
NumBytes 4
fixedresources
pos[1]=11111111b
pos[2]=00000000b
NamedItem
Prompt "Video Storage Address Select"
Choice "C0000-C3FFF"
pos[0]=1110XXXXb
mem 0C0000h - 0C3fffh
Choice "D0000-DFFFF"
pos[0]=0000XXXXb
mem 0d0000h - 0dffffh
Choice "D4000-DBFFF"
pos[0]=0001XXXXb
mem 0d4000h - 0dbfffh
Choice "D8000-DFFFF"
pos[0]=0010XXXXb
mem 0d8000h - 0dffffh
Choice "D0000-D3FFF,D8000-DBFFF"
pos[0]=0011XXXXb
mem 0d0000h-0d3fffh 0d8000h-0dbfffh
Choice "D0000-D3FFF,DC000-DFFFF"
pos[0]=0100XXXXb
mem 0d0000h-0d3fffh 0dC000h-0dffffh
Choice "D4000-D7FFF,DC000-DFFFF"
pos[0]=0101XXXXb
mem 0d4000h-0d7fffh 0dC000h-0dffffh
Choice "D0000-D3FFF,CC000-CFFFF"
pos[0]=0110XXXXb
mem 0d0000h-0d3fffh 0CC000h-0Cffffh
Choice "D0000-D3FFF,C0000-C3FFF"
pos[0]=0111XXXXb
mem 0d0000h-0d3fffh 0C0000h-0C3fffh
Choice "D4000-D7FFF,C0000-C3FFF"
pos[0]=1000XXXXb
mem 0d4000h-0d7fffh 0C0000h-0C3fffh
Choice "D4000-D7FFF,CC000-CFFFF"
pos[0]=1001XXXXb
mem 0d4000h-0d7fffh 0CC000h-0Cffffh
Choice "D8000-DBFFF,C0000-C3FFF"
pos[0]=1010XXXXb
mem 0d8000h-0dbfffh 0C0000h-0C3fffh
Choice "D8000-DBFFF,CC000-CFFFF"
pos[0]=1011XXXXb
mem 0d8000h-0dbfffh 0CC000h-0Cffffh
Choice "CC000-CFFFF"
pos[0]=1100XXXXb
mem 0cc000h-0cffffh
Choice "D8000-DBFFF"
pos[0]=1101XXXXb
mem 0d8000h-0dbfffh
Choice "F60000-FFFFFF,CC000-CFFFF"
pos[0]=1111XXXXb
mem 0f60000h-0ffffffh 0cc000h-0cffffh
Help
"This selects which system memory addresses will be dedicated
to this adapter. A choice of memory space at D4000 to DBFFF or
D8000 to DFFFF is recommended. This assignment need be changed
only if it is in conflict with another assignment. At least 2
16k blocks are recommended for card memory to card memory
operations. Conflicting assignments are marked with an asterisk.
Use the F5=Previous and the F6=Next keys to change selection if
you are in the 'Change configuration' window. If another choice
must be made, try to use a selection with the most pages. The
protect mode selection may be used if your operating system
supports 'protect mode' such as OS/2. DOS does not support
'protect mode'."
NamedItem
Prompt "I/O Address Select"
choice "5D00-5D0F" pos[0]=XXXX000Xb io 5D00h-5D0Fh
choice "5D10-5D1F" pos[0]=XXXX001Xb io 5D10h-5D1Fh
choice "7F00-7F0F" pos[0]=XXXX010Xb io 7F00h-7F0Fh
choice "7F10-7F1F" pos[0]=XXXX011Xb io 7F10h-7F1Fh
choice "DD00-DD0F" pos[0]=XXXX100Xb io 0DD00h-0DD0Fh
choice "DD10-DD1F" pos[0]=XXXX101Xb io 0DD10h-0DD1Fh
choice "FF00-FF0F" pos[0]=XXXX110Xb io 0FF00h-0FF0Fh
choice "FF10-FF1F" pos[0]=XXXX111Xb io 0FF10h-0FF1Fh
Help
"This selects which I/O port addresses will be dedicated to
this adapter. The choice, 5D00-5D0F, is recommended. This
assignment need only be changed if it is in conflict with
another assignment. Conflicting assignments are marked with
an asterisk. Use the F5=Previous and the F6=Next keys to
change the selection if you are in the 'Change
configuration' window."
NamedItem
Prompt "Interrupt Channel Select"
choice "Interrupt 3 " pos[3]=110000XXb int 3
choice "Interrupt 5 " pos[3]=110010XXb int 4
choice "Interrupt 7 " pos[3]=110100XXb int 5
choice "Interrupt 9 " pos[3]=110110XXb int 9
choice "Interrupt 10" pos[3]=111000XXb int 10
choice "Interrupt 11" pos[3]=111010XXb int 11
choice "Interrupt 12" pos[3]=111100XXb int 12
choice "Interrupt 15" pos[3]=111110XXb int 15
Help
"This selects which interrupt channel the adapter will use to
signal an event. The choice, interrupt 3, is recommended.
This assignment need only be changed if it is in conflict
with another assignment. Conflicting assignments are marked
with an asterisk. Use the F5=Previous and the F6=Next keys
to change the selection if you are in the 'Change
configuration' window. The selected interrupt is disabled."
