AdapterID 05FF8h
AdapterName "PLUS PASSPORT MC ADAPTER BOARD"
NumBytes 2
fixedresources
pos[1]=X0XXXXXXb
pos[0]=XXX0XX0Xb
nameditem
Prompt "BIOS Address"
Choice "Address DC00:0"
pos[0]=111XXXXXb
mem 0dc000h-0dffffh
Choice "Address D800:0"
pos[0]=110XXXXXb
mem 0d8000h-0dbfffh
Choice "Address D400:0"
pos[0]=101XXXXXb
mem 0d4000h-0d7fffh
Choice "Address D000:0"
pos[0]=100XXXXXb
mem 0d0000h-0d3fffh
Choice "Address CC00:0"
pos[0]=011XXXXXb
mem 0cc000h-0cffffh
Choice "Address C800:0"
pos[0]=010XXXXXb
mem 0c8000h-0cbfffh
Help
"To configure this adapter, you must choose the memory
address range the adapter will use for its BIOS ROM. There
are six memory address ranges that can be selected. Under
normal conditions, choose [Address DC00:0]. In order for
the adapter to work properly, the address chosen must be
higher than any other non-Passport hard disk adapter
installed in your system.
When there is more than one Passport MC Adapter installed,
the adapter in the lowest slot number will be the first
adapter, and therefore, base housing 1 is attached to it."
nameditem
Prompt "I/O Port Address"
Choice "Addresses F320-F323"
pos[0]=XXXX11XXb
io 0F320h-0F323h
Choice "Addresses F324-F327"
pos[0]=XXXX10XXb
io 0F324h-0F327h
Choice "Addresses F328-F32B"
pos[0]=XXXX01XXb
io 0F328h-0F32Bh
Choice "Addresses F32C-F32F"
pos[0]=XXXX00XXb
io 0F32Ch-0F32Fh
Help
"To configure this adapter, you must choose the I/O address
range the adapter will use. There are four I/O address ranges
that can be selected. Under normal conditions, choose
[Addresses F320-F323]."
nameditem
Prompt "DMA Channel"
Choice "Channel 3"
pos[1]=XXXX0011b
arb 3
Choice "Channel 5"
pos[1]=XXXX0101b
arb 5
Choice "Channel 6"
pos[1]=XXXX0110b
arb 6
Choice "Channel 7"
pos[1]=XXXX0111b
arb 7
Choice "Channel 8"
pos[1]=XXXX1000b
arb 8
Choice "Channel 9"
pos[1]=XXXX1001b
arb 9
Choice "Channel 10"
pos[1]=XXXX1010b
arb 10
Choice "Channel 11"
pos[1]=XXXX1011b
arb 11
Choice "Channel 12"
pos[1]=XXXX1100b
arb 12
Choice "Channel 13"
pos[1]=XXXX1101b
arb 13
Choice "Channel 14"
pos[1]=XXXX1110b
arb 14
Choice "Channel 4"
pos[1]=XXXX0100b
arb 4
Help
"To configure this adapter, you must choose the DMA channel the
adapter will use to transfer data. Under normal circumstances,
select [Channel 3] unless this conflicts with another option.
If it does conflict, select the next highest-numbered channel."
nameditem
Prompt "Fairness On/Off"
Choice "On"
pos[1]=XXX1XXXXb
Choice "Off"
pos[1]=XXX0XXXXb
Help
"Under normal circumstances, select [On]."
nameditem
Prompt "DMA Burst"
Choice "On"
pos[1]=0XXXXXXXb
Choice "Off"
pos[1]=1XXXXXXXb
Help
"Under normal circumstances, select [On]. This will give
the highest performance. It is possible that some programs
or adapters will not work with Passport in burst mode. In these
cases it will be necessary to select [Off]."
nameditem
Prompt "Interrupt Level"
Choice "Level 14"
pos[1]=XX1XXXXXb
Choice "Level 5"
pos[1]=XX0XXXXXb
Help
"To configure this adapter, you must choose which interrupt
line the adapter will use to communicate with the system's
microprocessor. Under normal circumstances, select [Level 14].
Multiple options may share the same interrupt level."
