This is a Acer 5220A Diagnostic and Device Driver diskette.
It consists of the following files:
5220A.EXE ---------- This is Acer 5220A diagnostic program.
NetWare server and shell drivers
The following diagram shows the directory structure of this diskette:
<root> ─┬─── READ.ME
├─── DIAG <DIR> ─┬─── READ.ME
│ └─── 5220A.EXE
│
├─── 5220AOS.LAN
├─── 5220ASH.LAN
├─── A5220AOS.OBJ
├─── B5220AOS.OBJ
├─── C5220AOS.OBJ
├─── D5220AOS.OBJ
└─── 5220ASH.OBJ
The "READ.ME" file for the diagnostic program which is located under
the "DIAG" directory, describes the operation of "5220A.EXE" file.
The other files including "5220AOS.LAN", "5220ASH.LAN",
"A5220AOS.OBJ", "B5220AOS.OBJ", "C5220AOS.OBJ", "D5220AOS.OBJ", and
"5220ASH.OBJ" are used for NetWare Version 2.1X installation.
"5220ASH.LAN" is a SHELL driver description file. It must be copied
to the SHGEN-1 diskette for SHGEN if you use Standard Floppy Disk Method
or copied to the SHGEN-1 sub-directory if using Hard Disk or Network
Drive Method.
"5220AOS.LAN" is a Operating System driver description file and must
be copied to the AUXGEN diskette for NETGEN if you use Standard Floppy
Disk Method. It must be copied to AUXGEN sub-directory if using Hard
Disk or Network Drive Method. If you are generating an External Bridge,
it must be copied to the BRGEN-1 diskette if using Standard Floppy Disk
Method. It must be copied tp BRGEN-1 sub-directory if using Hard Disk
or Network Drive Method.
The remaining *.OBJ files are the ACER 5220A drivers for NetWare
V2.1X. You will be prompted to insert this diskette (LAN_DRV_205)
during NETGEN and SHGEN.
The disk volume label LAN_DRV_205 is very important during the
generation of the NetWare 2.1X operating system and shell. Please make
a working copy of this diskette (use DISKCOPY command) and use it
during the NETGEN and SHGEN procedures. You can ignore other
subdirectories on this diskette, it will not affect NETGEN or SHGEN.
* Acer is a registered trademark of Acer Incorporated.
* NetWare is a registered trademark of Novell Inc.