Instructions for Installing the WPWin 6.1 Utilities Diskette

1    There are two ways to start the Installation of the
     Utilities diskette.

     a    Click on the Windows Setup Icon under the WPWin 6.1
          Group

     b    Click on File|Run.  If you installed using the standard
          installation type:

               C:\OFFICE\WPWIN\SETUP.EXE

          This is assuming you installed to C:\.  If you did not,
          type in the correct drive.

          If you installed using the Custom Installation, you
          will need to use BROWSE and find SETUP.EXE.

          Click OK to start the installation.

2    Click Install

3    Click Options

4    Click Utilities

     a    Install From: will be the directory where you have
          placed the contents of the 61UTIL.ZIP file.  If you
          placed the file on a diskette, then type A:\ or B:\. 
          If the files are on your hard drive, change the Install
          From: to that directory.

     b    Install To: will be the directory where the WPWin 6.1
          shared code is stored.  If you installed using the
          standard installation, then the directory would be
          \OFFICE\SHARED\WPC20.  If you installed using custom,
          you will need to change this to the correct directory.

5    Click OK

6    The installation will begin.  When it is completed, Click on
     Close

7    Click on Cancel

8    Then finally, click on Exit Setup.  You have now installed
     the WPWin 6.1 utilities diskette.