[INTRO] This disk contains the following; * Utility program to copy printer drivers to your hard disk. * Brief notes for each software application (listed below). * Technical Support telephone number listing. NOTE: The drivers included on this disk are intended ONLY for the version(s) of software listed below. Application Version(s) ----------- ---------- Harvard Graphics, Software Publishing Corp. 3.0 Lotus 1-2-3, Lotus Development Corp. 2.3/2.4 Lotus 1-2-3, Lotus Development Corp. 3.1/3.4 Microsoft Word, Microsoft Corp. 5.5 Microsoft Word, Microsoft Corp. 6.0 WordPerfect, WordPerfect Corp. 5.1 WordPerfect, WordPerfect Corp. 6.0 Microsoft Works, Microsoft Corp. 3.0 WordStar, WordStar Intl. 7.0d WordStar Graphics, WordStar Intl. [ENDE] [UPGRADE] The printer drivers included with this utility were developed by each software vendor and support only the versions of software listed on this diskette. If you're using an old version of software, you'll need to upgrade by contacting the software vendor or your local dealer. For your convenience each software vendor has provided us a world-wide list of Technical Support telephone numbers. Lotus Development Corp. (Lotus 1-2-3) Support Offices ----------------------------------------------------- USA: (800) 223-1662 Canada: (800) 265-6887 Microsoft Support Offices ------------------------- USA: (206) 635-7210 Sweden: (46)(8)750-5680 Canada: (416) 568-3503 Holland: (31)25-03-32060 France: (33)(1)69-86-10-20 Germany: (49)(89)31761131 (49)(89)31761150 New Zealand: (64)(9)358-9724 Australia: (61)(2)870-2131 Singapore: (65)227-6833 Spain: (34)(1)803-9960 Brazil: (55)(11)530-4455 England, UK: (44)(734)271-00 Venezuela: (58)(2) 91 33 42 Italy: (39)(2)26 91 21 Argentina: (54)(1)814-0356 Switzerland: (41)(1)342-4083 Mexico: (52)(5)325-0911 Portugal: (351)(1)726-9011 Japan: (81)(33)363-120 Israel: (972)(3)752-7915 Korea: (82)(2)563-9230 India: (91)(11)644-4457 Software Publishing Corp. (Harvard Graphics) Support Offices ------------------------------------------------------------ USA/Canada: (408) 988-4005 UK/International: (44)(344)867-100 WordPerfect Support Offices --------------------------- USA - WordPerfect Corporation Canada - WordPerfect WordPerfect: 800-541-5170 (800) 541-5097 After hours: 801-222-9010 Australia - WordPerfect Pacific Norway - WordPerfect Norge (Also covers New Guinea) (47 2) 37 66 90 (61 2) 415 5333 Belgium - WordPerfect Belgium Singapore - WordPerfect Asia (Also covers Luxembourg) (Also covers Hong Kong, Indonesia, (32 2) 218 37 62 Malaysia, Phillipines) (65) 7731400 Denmark - WordPerfect Denmark South Africa - WordPerfect South (45) 42 25 00 99 Africa (Also covers Botswana, Zambia, Lesotho, Malawi, Mozambique, Namibia, Finland - WordPerfect Finland Swaziland, Zimbabwe) 502 7291 (27 21) 696 2880 Germany - WordPerfect Software GmbH Sweden - WordPerfect Sverige (Also covers Austria) (46 8) 733 00 70 (49 6196) 9 04 02 Japan - WordPerfect Japan Switzerland - WordPerfect (81 3) 3780 0451 (41 31) 922 11 22 Netherlands - WordPerfect Nederland United Kingdom - WordPerfect U.K. 4070 777 (Covers England, Scotland, Wales, North & South Ireland) (44 932) 850 555 WordStar Support Offices ------------------------ USA/Canada: (812) 323-0069 Germany: (49)(89)7858000 Japan: (81)(33)4234901 UK: (44)(81)6438866 [ENDE] [STOP[123R2] IMPORTANT NOTE: The Lotus 1-2-3 Release 2.3/2.4 printer driver can only be installed directly from the Lotus Install program. Before exiting this program, we recommend that you print the installation note. [ENDE] [HG] HP DeskJet 560C Notes for Harvard Graphics Ver. 3.0 Installation Notes ------------------ Use the installation utility contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette to copy the printer driver files to the driver subdirectory on your hard disk (usually \HG3\DRIVER). IMPORTANT NOTE -------------- The HP DeskJet 560C printer is compatible with the HP DeskJet 550C prin- ter. The Harvard Graphics driver included on this driver disk was de- veloped for the HP DeskJet 550C printer and is recommended for use with your HP DeskJet 560C printer. Remember to select the HP DeskJet 550C as your printer model when selecting a printer driver in Harvard Graphics. Setting Up Harvard Graphics --------------------------- 1. Start the Harvard Graphics program. 2. From the F6-Main Menu, press 8 (Setup). 3. Press 5 (Printer 1). 4. From the Printer 1 Setup Menu press F3 (Choices). 5. Use the down arrow key to highlight "HP DeskJet 550C". 6. Press the down arrow key to position the cursor across from "Output Port". 7. Press F3 (Choices). 8. Use the arrow keys to select the port where your printer is connected, then press . 9. Press the down arrow key to position the cursor across from "Default paper size", then press F3 (Choices). 10. Use the arrow keys to select the correct paper size, then press . 11. Use the arrow keys to position the cursor across from "Use spooler". 12. Press F3 (Choices), and select "Yes". NOTE: Setting "Use spooler" to "Yes" activates the integral spooler and allows you to return to Harvard Graphics sooner when printing. With it set to "No", you'll have to wait until the print job is nearly finished in order to continue working. If you do not wish to use the integral spooler, (for example, when using an external hardware or software spooler) set "Use spooler" to "No". 13. Use the arrow keys to position the cursor across from "Quality". 14. Press F3 (Choices). 15. Select one of the following "Quality" options, then press . High: Presentation/best quality. Medium: Normal/medium quality (faster printing than "High"). Draft: Use to "proof" your work before printing a final copy. 16. Press . 17. Press 1 (Program Defaults). 18. Using the arrow keys, move the cursor down to the bottom of the screen across from "Max. spooler size (K):". 19. Type 3072 as the spooler size, then press . NOTE: This sets the spooler size to approximately 3Mb. Since Harvard Graphics creates this 3Mb file on your hard disk, make sure that you have enough disk space to accommodate it. Lowering the spooler size will increase the time it will take to free up your PC while printing. If you are using an external spooler (hardware or software solution), set the "Use spooler" option to "No" in the Printer Setup Menus. 20. Press the Esc key. Printing from Harvard Graphics 3.0 ---------------------------------- 1. From the F6-Main Menu press 5 (Output). 2. Press 1 (Printer 1). 3. Check to see if all of the printing information is correct, then press F10-Continue to print. Miscellaneous Notes ------------------- If white areas of your chart print black (reversed B&W), you may need to make the following change to your printer setup configuration; 1. From the F6-Main Menu press 8 (Setup). 2. Press 5 (Printer 1). 3. From the Printer 1 Setup Menu select F8 (Options). 4. From the Printer Options menu set "Reverse black and white" to "No". The Harvard Graphics drivers contained on the "HP DeskJet 550C Printer Drivers for DOS applications" diskette are developed and licensed by Software Publishing Corporation solely for use by licensed users of Harvard Graphics(R) version 3.0. Copyright 1992 Software Publishing Corporation. All rights reserved. SOFTWARE PUBLISHING CORPORATION LICENSES THE ENCLOSED ON AN "AS IS" BASIS WITHOUT ANY WARRANTY WHATSOEVER, AND SPECIFICALLY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE ENCLOSED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL SOFTWARE PUBLISHING CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OF THE ENCLOSED, INCLUDING WITHOUT LIMITATION, FOR LOST DATA, LOST PROFITS OR BUSINESS INTERRUPTION, WHETHER OR NOT WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. DEPENDING ON STATE LAW, CERTAIN LIMITATIONS CONTAINED HEREIN MAY NOT APPLY TO YOU OR YOU MAY HAVE OTHER RIGHTS, SO BE SURE TO CHECK. HARVARD GRAPHICS(R) IS A REGISTERED TRADEMARK OF SOFTWARE PUBLISHING CORPORATION, SANTA CLARA, CALIFORNIA. [ENDE] [123R2] HP DeskJet 560C Notes for Lotus(R) 1-2-3(R) Release 2.3, 2.4 Introduction ------------ Lotus printer device drivers are software programs that enable printers to print text and graphs from Lotus 1-2-3 Release 2.3/2.4 on DOS-based PCs. IMPORTANT NOTE -------------- The HP DeskJet 560C printer is compatible with the HP DeskJet 550C printer. The Lotus(R) 1-2-3(R) driver included on this driver disk was developed for the HP DeskJet 550C printer and is recommended for use with your HP DeskJet 560C printer. Remember to select the HP DeskJet 550C as your printer model when selecting a printer driver in Lotus(R) 1-2-3(R). The DeskJet 550C driver included on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette is intended to create output in the WYSIWYG (:Print) publishing environment of 1-2-3 for DOS. This driver is not intended for use in the 1-2-3 native mode (/Print). However, the "HP DeskJet+ and 500" driver (shipped with 1-2-3) will allow monochrome printing from the 1-2-3 native mode. Installation ------------ To properly install the printer driver files for your DeskJet 560C printer, you'll need to run the Lotus INSTALL program from your hard disk, then insert the "HP DeskJet 560C Printer Drivers for DOS applications" diskette in a floppy drive when prompted. For additional information, refer to the instructions in Chapter 4 of Getting Started (if you have Release 2.3) or Chapter 5 of Getting Started (if you have Release 2.4). Follow these general guidelines: 1. Select "Change Selected Equipment". 2. Select "Add New Drivers to the Library". 3. Insert the DeskJet 560C Driver Disk into a floppy drive. 4. Type the name of the floppy drive when prompted by the Lotus INSTALL program (e.g., A or B). 5. Select "Modify the Current Driver Set". 6. Select "Graphics Printer", "HP", then "DeskJet 560C". 7. Select "Return to Previous Menu". 8. Select "Save the Current Driver Set", then to accept the default 123 file name. 9. Press at the "GENERATING FONTS" screen. 10. Highlight one of the font options...then press . 11. Highlight "Yes" ...then press . 12. Press any key to complete the installation. Setting Up WYSIWYG ------------------ In general, you should do the following; 1. Select :, Print, Config, Printer ...then use the arrow keys to select "HP DeskJet 550C Paper" as the printer and media type. 2. Press . 3. Select Interface ...then use the arrow keys to select the port where your printer is connected ...then press . 4. Select Bin, then Single-Sheet. 5. Press . 6. Select the Orientation (Portrait or Landscape) ...then press . 7. Select Quit twice to return to your spreadsheet. Printing From WYSIWYG --------------------- The following steps assume that the WYSIWYG add-in program is loaded. 1. Select ":" to access the WYSIWYG command line. 2. Select Print, Range, Set ...to select the cells you want to print. 3. Select Go ...to print. Miscellaneous Notes ------------------- 1. The DeskJet 550C printer driver is intended for use in WYSIWYG and PrintGraph only. 2. Graphics will print on either paper or transparencies. 3. For normal printing in WYSIWYG, the Paper Bin setting should be set to "Single-Sheet" for correct page output. Select ":", P(Print), C(Config), B(Bin), S(Single-Sheet). This driver was designed to support the graphic printing capabilities of the DeskJet 560C printer in WYSIWYG mode. For best results when printing ASCII text based spreadsheets, it is recommended that you use the"DeskJet+, 500" driver (shipped with 1-2-3) in the 1-2-3 Native Mode for faster results. The 1-2-3 drivers contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette are licensed by Lotus Development Corporation, solely for use by Licensed Users of 1-2-3 Release 2.3 or 2.4. (c) Copyright 1992, Lotus Development Corporation. All rights Reserved. LOTUS DEVELOPMENT CORPORATION MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, REGARDING THE ENCLOSED, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THERE MAY BE OTHER RIGHTS THAT YOU MAY HAVE WHICH VARY FROM STATE TO STATE. LOTUS DEVELOPMENT CORPORATION EXCLUDES ANY WARRANTY COVERAGE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU. Lotus(R) and 1-2-3(R) are registered trademarks of Lotus Development Corporation. [ENDE] [123R3] HP DeskJet 560C Notes for Lotus(R) 1-2-3(R) Release 3.1, 3.4 IMPORTANT NOTE -------------- The HP DeskJet 560C printer is compatible with the HP DeskJet 550C printer. The Lotus(R) 1-2-3(R) driver included on this driver disk was developed for the HP DeskJet 550C printer and is recommended for use with your HP DeskJet 560C printer. Remember to select the HP DeskJet 550C as your printer model when selecting a printer driver in Lotus(R) 1-2-3(R). Copying the Driver Files ------------------------ Copying and installing the driver files for 1-2-3 is a 3-step process. 1. Copy the driver files (using the DRIVER.EXE program contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette) to the 1-2-3 directory on your hard disk. NOTE: The files that are copied and decompressed are font files (*.LRF). 2. Run the INSTDRV.BAT utility contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette. This utility merges files contained on the floppy with those present on your hard disk (in the 1-2-3 directory). (See below for instructions.) 3. Run the Lotus INSTALL program (on your hard disk) to add the drivers to your library. Using the "INSTDRV.BAT" Utility ------------------------------- Use the installation utility, "INSTDRV.BAT", contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette to copy the printer driver files to the 1-2-3 directory on your hard disk. 1. Insert the DeskJet 560C DOS Driver Disk into a floppy drive. 2. From the DOS prompt on your floppy drive (e.g., A: or B:), run INSTDRV.BAT by typing INSTDRV followed by the full path name of your 1-2-3 directory and the letter of your floppy drive (the floppy drive where this disk is located). For example: INSTDRV C:\123R3 B ...then . In this example the B: drive is the floppy drive where the driver disk is located. This batch file will copy all the necessary additional files to the 1-2-3 subdirectory and will modify the INSTALL.DDF file already present in the 1-2-3 subdirectory. The existing INSTALL.DDF file will be renamed INSTALL.BAK. Using the Lotus(R) Install Program ---------------------------------- 1. From the 1-2-3 directory on your hard disk type INSTALL ...then . NOTE: Make sure you have copied the WYSIWYG program to your hard disk during the 1-2-3 installation. The following procedures will vary slightly if you have not yet completed the Lotus Install program's "First-Time Installation" process. We recommend that you complete the First-Time Installation without installing printers, then follow the steps below to modify your installation and set up your DeskJet 560C. 2. Highlight "Change Selected Equipment" ...then press . 3. Highlight "Modify Current DCF" ...then press . 4. Highlight "Change Selected Printer" ...then press . 5. Highlight "HP" ...then press . 6. Press the up arrow to select "HP DeskJet 550C" ...then press . 7. Press again to select "Paper". NOTE: If you don't want to use transparencies with your printer, you can skip to step #12. Otherwise continue with step #8. 8. Highlight "Change Selected Printer" ...then press . 9. Highlight "HP" ...then press . 10. Press the up arrow to select "HP DeskJet 550C" ...then press . 11. Highlight "Transparency" ...then press . 12. Press (to Return to Menu). 13. Highlight "Save Changes" ...then press . 14. Press to accept the changes you've made. 15. At this point in the installation you may need to have your 1-2-3 master disks available. Type the letter for the floppy disk drive you'll be using ...then press . 16. In the "Generating Fonts" opening screen press to continue. 17. Highlight one of the font options ...then press . 18. Highlight "Yes" ...then press . 19. Press any key to complete the installation. Setting Up 1-2-3 ---------------- In general, you should do the following; 1. Select /, Worksheet, Global, Default, Printer, Name ...then use the arrow keys to select "HP DeskJet 550C Graphics Paper" as your default printer and media ...then press . 2. Select Interface ...then use the arrow keys to select the port where your printer is connected ...then press . (SEE NOTE BELOW) 3. Select Pg-Length, type 60 (for US Ltr Paper), then press . 4. Select Quit, Update ...to save your default settings ...then Quit. Printing From WYSIWYG --------------------- The following steps assume that the WYSIWYG add-in program is loaded. (If not, press Alt-F10 to load the WYSIWYG program.) 1. Select ":" to access the WYSIWYG command line. 2. Select Print, Range, Set ...to select the cells you want to print. 3. Select Configuration, Printer ...then use the arrow keys to select either "HP DeskJet 550C Paper" or "HP DeskJet 550C Transparency". Press . 4. Select the desired Resolution ...then press . NOTE: "Final" = 300 dots per inch resolution "Draft" = 150 dots per inch resolution 5. Select Bin= "Single sheet". 6. Select Quit, then Go ...to print. Miscellaneous Notes ------------------- If you are using the parallel interface connection to your printer, the printer interface within 1-2-3 should be set to selection 5, "Output Device LPT1" rather than using the "Parallel 1" selection. This driver was designed to support the graphic printing capabilities of the DeskJet 560C printer in WYSIWYG mode. For best results when printing ASCII text based spreadsheets, it is recommended that you use the "DeskJet+, 500" driver (shipped with 1-2-3) in the 1-2-3 Native Mode for faster results. The Lotus drivers contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette were developed and licensed by Lotus Development Corporation, solely for use by Licensed Users of 1-2-3 Release 3.1/3.1+/3.4. (c) Copyright 1992, Lotus Development Corporation. All rights Reserved. LOTUS DEVELOPMENT CORPORATION MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, REGARDING THE ENCLOSED, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THERE MAY BE OTHER RIGHTS THAT YOU MAY HAVE WHICH VARY FROM STATE TO STATE. LOTUS DEVELOPMENT CORPORATION EXCLUDES ANY WARRANTY COVERAGE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU. Lotus(R) and 1-2-3(R) are registered trademarks of Lotus Development Corporation. *Lotus(R) 1-2-3(R) is a product of Lotus Development Corporation [ENDE] [MSW55] HP DeskJet 560C Notes for Microsoft(R) Word, Version 5.5 Installation Notes ------------------ Use the DRIVER.EXE utility contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette to decompress and copy the printer driver files to the MS Word directory on your hard disk. IMPORTANT NOTE -------------- The HP DeskJet 560C printer is compatible with the HP DeskJet 550C printer. The Microsoft Word 5.5 drivers included on this driver disk were developed for the HP DeskJet 550C printer and is recommended for use with your HP DeskJet 560C printer. Remember to select the HP DeskJet 550C as your printer model when selecting a printer driver in Microsoft Word 5.5. Miscellaneous Notes ------------------- When printing envelopes, the minimum left margin (left edge of return address) is approximately 0.9". Graphics printing in landscape mode is not supported. A problem exists in the driver where strike-out, superscripts, and subscripts are spaced incorrectly for some proportionally spaced fonts (CGTimes and Univers). A problem exists in the driver where small caps do not print correctly for some of the larger Courier and Letter Gothic fonts. A problem exists where Letter Gothic 24 pitch, 6 point and 12 point text will not be justified correctly (the character spacing is incorrect). A problem exists in the driver where a full page of landscape text may cause the printer to lose some data and in some cases lock up the printer (all lights flashing). These are the printer driver files (PRD files) selectable from the "File, Printer Setup" menu: PRD File Name Description of PRD Files ---------------------------------------------------------------------- HPDJ.PRD Portrait fonts resident in the printer; Courier (modern a), Univers (roman b), CGTimes (roman c), LetterGothic (roman c). HPDJ1.PRD Portrait fonts (resident and cartridge based); Courier (modern a), PrestigeElite[B] (modern d), Letter- Gothic[C] (modern e), LetterGothic_Internal, Helv[G/H/J/8A] (modern i), CGTimes (roman c), TmsRmn[D/E/F/8A] (roman i), PrestigePiFont[B] (symbol a), LineDraw[A/B/C] (symbol b), PrestigeMath7[B] (symbol c), PrestigeMath8[B] (symbol d). HPDJ2.PRD Portrait fonts (resident and cartridge based); Courier (modern a), LtrGothicASCII[M] (modern e), Letter- Gothic (modern f), HelvASCII[Q/8A] (modern i), Presenta- tions[M] (modern m), CGTimes (roman c), TmsRmnASCII[P/8A] (roman i), LineDraw[M] (symbol b). HPDJ3.PRD Portrait fonts (resident and cartridge based); Courier (modern a), LetterGothic (modern e), Helv[T/V/8C] (modern i), Univers[8D] (modern k), CGTimes (roman a), TmsRmn[R/U/8C] (roman i). HPDJ3ASC.PRD Portrait fonts (resident and cartridge based); Courier (modern a), LetterGothic (modern e), CGTimes (roman a), HelvASCII[T/V/8C] (modern i), UniversASCII[8D] (modern k), TmsRmnASCII[R/U/8C] (roman i). HPDJ4.PRD Portrait fonts (resident and cartridge based); Courier (modern a), LetterGothic (modern e), CGTimes (roman c), Univers[W2] (modern i), CGTriumvirate[9B] (modern l), CGTimes[W1/W2] (roman f), CGCenturySchlbk[9B] (roman j), Garamond[9C] (roman m), DomCasual[9D] (decor f), Brush[9E] (decor g). HPDJLAND.PRD Landscape fonts (resident and cartridge based); Courier (modern a), LetterGothic[7L] (modern e). The MS Word drivers contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette were developed by Microsoft Corporation, solely for use by licensed users of Microsoft Word, Version 5.5. [ENDE] [MSW60] HP DeskJet 560C Notes for Microsoft(R) Word, Version 6.0 Installation Notes ------------------ Use the DRIVER.EXE utility contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette to decompress and copy the printer driver files to the MS Word directory on your hard disk. Miscellaneous Notes ------------------- When printing envelopes, the minimum left margin (left edge of return address) is approximately 0.9". Graphics printing in landscape mode is not supported. A problem exists in the driver where strike-out, superscripts, and subscripts are spaced incorrectly for some proportionally spaced fonts (CGTimes and Univers). A problem exists in the driver where small caps do not print correctly for some of the larger Courier and Letter Gothic fonts. A problem exists where Letter Gothic 24 pitch, 6 point and 12 point text will not be justified correctly (the character spacing is incorrect). A problem exists in the driver where a full page of landscape text may cause the printer to lose some data and in some cases lock up the printer (all lights flashing). These are the printer driver files (PRD files) selectable from the "File, Printer Setup" menu; PRD File Name Description of PRD Files ---------------------------------------------------------------------- DJ560C_P.PRD Portrait fonts resident in the printer; Courier (modern a), Univers (roman b), CGTimes (roman c), LetterGothic (roman c). DJ560C_L.PRD Landscape fonts (resident and cartridge based); Courier (modern a), LetterGothic[7L] (modern e). The MS Word drivers contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette were developed by Microsoft Corporation, solely for use by licensed users of Microsoft Word, Version 6.0. [ENDE] [WP51] HP DeskJet 560C Notes for WordPerfect(R) Version 5.1 Installation Notes ------------------ Use the utility contained on this diskette to decompress and copy the printer driver file to the WordPerfect directory on your hard disk. To select the HP DeskJet 560C printer from WordPerfect, do the following; 1. Press Shift-F7. 2. Select "S - Select Printer". 3. Select "2 Additional Printers". 4. Use the arrow keys to highlight the "HP DeskJet 560C" printer. 5. Choose "1 Select", and press . 6. Press F7 to exit the help screen, then press F7 again to return to the "Select Printer: Edit" screen. 7. The "HP DeskJet 560C" driver name will be highlighted. 8. Press "1 Select" to select the driver. Refer to your software program documentation for additional information on how to select your printer within WordPerfect. Miscellaneous Notes ------------------- A printing error may occur if superscripted and/or subscripted text is placed between two side-by-side graphic images. If this occurs, please contact WordPerfect Corporation for a work-around solution. When printing envelopes, the minimum left margin (left edge of return address) is approximately 0.9". When using landscape fonts, the minimum left margin should be 0.7" and the minimum top margin should be 0.3". Graphics printing in landscape orientation is not supported. The WordPerfect drivers contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette were developed by WordPerfect Corporation, solely for use by licensed users of WordPerfect Version 5.1. [ENDE] [WP60] HP DeskJet 560C Notes for WordPerfect(R) Version 6.0 Installation Notes ------------------ Use the utility contained on this diskette to decompress and copy the printer driver file to the WordPerfect directory on your hard disk. To select the DeskJet 560C printer from WordPerfect, do the following; 1. Press Shift-F7. 2. Select "S - Select Printer". 3. Select "2 Additional Printers". 4. Use the arrow keys to highlight the "HP DeskJet 560C" printer. 5. Choose "1 Select", and press . 6. Press F7 to exit the help screen, then press F7 again to return to the "Select Printer: Edit" screen. 7. The "HP DeskJet 560C" driver name will be highlighted. 8. Press "1 Select" to select the driver. Refer to your software program documentation for additional information on how to select your printer within WordPerfect. Miscellaneous Notes ------------------- A printing error may occur if superscripted and/or subscripted text is placed between two side-by-side graphic images on a portrait page if two conditions are met: 1. a printer font is used between the graphics; and 2. the page is not printed graphically (Print Job Graphically box is not checked in the Print menu; applies to monochrome printing only) This error will not occur for landscape pages. If this error occurs, please contact WordPerfect Corporation for a work-around solution. If you are using WordPerfect version 6.0, you may want to upgrade to the interim release, version 6.0a. Contact WordPerfect for details. WordPerfect 6.0 does not support printer internal fonts on landscape pages. To maximize print speed on a portrait page, set Graphics Quality to Medium and use a printer internal font when possible. For high quality output, you can set Graphics Quality to High; however, printing time will increase considerably. If you are printing on HP Transparency or Glossy Media, Graphics Quality should be set to High for best output. Printer internal fonts are disabled whenever output is printed in color. This change was necessary in order for WordPerfect 6.0 to support color output from the DeskJet 550C and 560C printers. Print times will increase significantly whenever you print a page in color, as WordPerfect automatically converts the entire page to raster graphics data. There is no way to override this conversion. When printing envelopes, the minimum left margin (left edge of return address) is approximately 0.9". The WordPerfect drivers contained on the "HP DeskJet 560C Printer Drivers for DOS applications" diskette were developed by WordPerfect Corporation, solely for use by licensed users of WordPerfect, Version 6.0. [ENDE] [WORKS] HP DeskJet 560C Notes for Microsoft(R) Works, Version 3.0 IMPORTANT NOTE -------------- The HP DeskJet 560C printer is compatible with the HP DeskJet 550C printer. The Microsoft Works drivers included on this driver disk were developed for the HP DeskJet 550C printer and are recommended for use with your HP DeskJet 560C printer. Remember to select the HP DeskJet 550C as your printer model when selecting a printer driver in Microsoft Works. Installation Notes ------------------ Use the utility contained on this diskette to decompress and copy the printer driver file to the Works directory on your hard disk. To select the DeskJet 550C printer from Works, do the following; 1. Press Alt. 2. Select "P - Printer". 3. Select "S - Printer Setup". 4. Press the Tab key to select the "Change Printer & Option..." button, and press . 5. Use the arrow keys to highlight the "HP DeskJet 550C" printer, and press . 6. The "HP DeskJet 550C" driver name will be displayed along with additional options (e.g., Graphics, Paper Source...). 7. To save and exit, press the Tab key to select the "OK" button and press . Refer to your software program documentation for additional information on how to select your printer within Works. [ENDE] [WS] HP DeskJet 550C Notes for WordStar(R), Version 7.0d IMPORTANT NOTE -------------- The HP DeskJet 560C printer is compatible with the HP DeskJet 550C printer. The WordStar(R) driver included on this driver disk was developed for the HP DeskJet 550C printer and is recommended for use with your HP DeskJet 560C printer. Remember to select the HP DeskJet 550C as your printer model when selecting a printer driver in WordStar(R). This driver is intended ONLY for WordStar Ver. 7.0d. If you have a previous version, contact WordStar International Corporation to upgrade to version 7.0d. Installation Notes ------------------ Use this utility to copy and decompress the printer driver files to your WordStar directory. Selecting the Printer in WINSTALL --------------------------------- 1. Run the WINSTALL program provided with your WordStar package. 2. Highlight "Modify or install a printer (PRCHANGE)" and press . 3. In the "Installed Printer Menu", type a new PDF name as follows; DJ550C (or DJ550C) ...then press . 4. Highlight "Extra database" ...then press . 5. Highlight "Hewlett-Packard DeskJet 550C" ...then press . 6. Highlight "Select printer adapter port", press and choose the interface port (e.g., LPT1, etc.). 7. Highlight "Return to Installed Printer Menu" ...then press . 8. Type "Y" (Yes) if you want the DeskJet 550C to be your default printer. 9. Press F10-Finished. 10. Highlight "Save and return to DOS" ...then press . For additional information on how to select and configure your printer within WordStar, refer to your software program documentation. Miscellaneous Notes ------------------- The paper size defaults to US Letter (8.5" x 11"). Use the Layout pulldown menu to select A4 or other paper sizes and types. Transparency and glossy media printing is implemented with .bn commands. Use WSCHANGE to set the super/subscript roll to 0 (.sr 0) to take full advantage of hardware superscript and subscript positioning. This is necessary when you are printing graphics adjacent to text and are using footnotes or explicit subscripts or superscripts. Stacked envelopes (using MailList) will print with a wide left margin unless you create a macro to select landscape printing rather than choosing envel- opes. The minimum left margin is approximately 0.5" in landscape mode, whereas in envelope mode the minimum is 0.9". Graphics printing in landscape orientation is not supported. A graphic image that overlaps another graphic image may cause one of the images not to print, even though both images may be previewed on screen. If this problem occurs, resize (shrink) one of the graphics to correct the problem. The WordStar drivers contained on the "HP DeskJet 550C Printer Drivers for DOS applications" diskette were developed by WordStar International Corporation, solely for use by licensed users of WordStar, Version 7.0d. [ENDE] [INSET] HP DeskJet 560C Notes for WordStar(R), Version 7.0d Inset Graphics IMPORTANT NOTE -------------- The HP DeskJet 560C printer is compatible with the HP DeskJet 550C printer. The WordStar(R) driver included on this driver disk was developed for the HP DeskJet 550C printer and is recommended for use with your HP DeskJet 560C printer. Remember to select the HP DeskJet 550C as your printer model when selecting a printer driver in WordStar(R). Installation Notes ------------------ Use this utility to copy and decompress the printer driver files to your WordStar InSet directory. 1. To select the graphics mode to be used with the HP DeskJet 560C, run the SETUP program from within the INSET directory on your hard drive. 2. Select "C Printer....:" and choose either the "HPDJ550C HP DeskJet 550C - CMYK mode", or "HPDJCMY4 HP DeskJet 550C - with composite black". 3. You may want to increase the number of "E 4K Buffers...", and the "R Max .PIX Size.." to accommodate large color graphic images. Refer to your software program documentation for additional information on how to select and configure your printer within InSet and WordStar. Miscellaneous Notes ------------------- Using the "...CMYK mode" driver allows true black and color graphics. The "...composite black" driver will print graphics using only the color ink cartridge. Each time that you switch between the HPDJCMY4 and HPDJ550C drivers, you'll need to delete any .FST files prior to restarting InSet or WordStar. Otherwise, the previous driver will continue to be used. If your image colors are not printing correctly, you may need to adjust the color mapping within InSet. Choose , , , then make sure that all colors are mapped correctly. [ENDE]