[INTRO]
This disk contains the following;
* Utility program to copy printer drivers to your hard disk.
* Brief notes for each software application (listed below).
* Technical Support telephone number listing.
NOTE: The drivers included on this disk are intended ONLY for
the version(s) of software listed below.
Application Version(s)
----------- ----------
Harvard Graphics, Software Publishing Corp. 3.0
Lotus 1-2-3, Lotus Development Corp. 2.3/2.4
Lotus 1-2-3, Lotus Development Corp. 3.1/3.4
Microsoft Word, Microsoft Corp. 5.5
Microsoft Word, Microsoft Corp. 6.0
WordPerfect, WordPerfect Corp. 5.1
WordPerfect, WordPerfect Corp. 6.0
Microsoft Works, Microsoft Corp. 3.0
WordStar, WordStar Intl. 7.0d
WordStar InSet Graphics, WordStar Intl.
[ENDE]
[UPGRADE]
The printer drivers included with this utility were developed by each
software vendor and support only the versions of software listed on
this diskette. If you're using an old version of software, you'll need
to upgrade by contacting the software vendor or your local dealer.
For your convenience each software vendor has provided us a world-wide
list of Technical Support telephone numbers.
Lotus Development Corp. (Lotus 1-2-3) Support Offices
-----------------------------------------------------
USA: (800) 223-1662
Canada: (800) 265-6887
Microsoft Support Offices
-------------------------
USA: (206) 635-7210 Sweden: (46)(8)750-5680
Canada: (416) 568-3503 Holland: (31)25-03-32060
France: (33)(1)69-86-10-20 Germany: (49)(89)31761131
(49)(89)31761150
New Zealand: (64)(9)358-9724 Australia: (61)(2)870-2131
Singapore: (65)227-6833 Spain: (34)(1)803-9960
Brazil: (55)(11)530-4455 England, UK: (44)(734)271-00
Venezuela: (58)(2) 91 33 42 Italy: (39)(2)26 91 21
Argentina: (54)(1)814-0356 Switzerland: (41)(1)342-4083
Mexico: (52)(5)325-0911 Portugal: (351)(1)726-9011
Japan: (81)(33)363-120 Israel: (972)(3)752-7915
Korea: (82)(2)563-9230 India: (91)(11)644-4457
Software Publishing Corp. (Harvard Graphics) Support Offices
------------------------------------------------------------
USA/Canada: (408) 988-4005
UK/International: (44)(344)867-100
WordPerfect Support Offices
---------------------------
USA - WordPerfect Corporation Canada - WordPerfect
WordPerfect: 800-541-5170 (800) 541-5097
After hours: 801-222-9010
Australia - WordPerfect Pacific Norway - WordPerfect Norge
(Also covers New Guinea) (47 2) 37 66 90
(61 2) 415 5333
Belgium - WordPerfect Belgium Singapore - WordPerfect Asia
(Also covers Luxembourg) (Also covers Hong Kong, Indonesia,
(32 2) 218 37 62 Malaysia, Phillipines)
(65) 7731400
Denmark - WordPerfect Denmark South Africa - WordPerfect South
(45) 42 25 00 99 Africa (Also covers Botswana, Zambia,
Lesotho, Malawi, Mozambique, Namibia,
Finland - WordPerfect Finland Swaziland, Zimbabwe)
502 7291 (27 21) 696 2880
Germany - WordPerfect Software GmbH Sweden - WordPerfect Sverige
(Also covers Austria) (46 8) 733 00 70
(49 6196) 9 04 02
Japan - WordPerfect Japan Switzerland - WordPerfect
(81 3) 3780 0451 (41 31) 922 11 22
Netherlands - WordPerfect Nederland United Kingdom - WordPerfect U.K.
4070 777 (Covers England, Scotland, Wales,
North & South Ireland)
(44 932) 850 555
WordStar Support Offices
------------------------
USA/Canada: (812) 323-0069
Germany: (49)(89)7858000
Japan: (81)(33)4234901
UK: (44)(81)6438866
[ENDE]
[STOP[123R2]
IMPORTANT NOTE:
The Lotus 1-2-3 Release 2.3/2.4 printer driver can only be installed
directly from the Lotus Install program. Before exiting this program,
we recommend that you print the installation note.
[ENDE]
[HG]
HP DeskJet 520 Notes
for Harvard Graphics Ver. 3.0
Installation Notes
------------------
Use the installation utility contained on the "HP DeskJet 520 Printer
Drivers for DOS applications" diskette to copy the printer driver files
to the driver subdirectory on your hard disk (usually \HG3\DRIVER).
IMPORTANT NOTE
--------------
The HP DeskJet 520 printer is compatible with the HP DeskJet 510 prin-
ter. The Harvard Graphics driver included on this driver disk was de-
veloped for the HP DeskJet 510 printer and is recommended for use with
your HP DeskJet 520 printer. Remember to select the HP DeskJet 510 as
your printer model when selecting a printer driver in Harvard Graphics.
Setting Up Harvard Graphics
---------------------------
1. Start the Harvard Graphics program.
2. From the F6-Main Menu, press 8 (Setup).
3. Press 5 (Printer 1).
4. From the Printer 1 Setup Menu press F3 (Choices).
5. Use the down arrow key to highlight "HP DeskJet 510".
6. Press the down arrow key to position the cursor across from
"Output Port".
7. Press F3 (Choices).
8. Use the arrow keys to select the port where your printer is connected,
then press <Enter>.
9. Press the down arrow key to position the cursor across from "Default
paper size", then press F3 (Choices).
10. Use the arrow keys to select the correct paper size, then press <Enter>.
11. Use the arrow keys to position the cursor across from "Use spooler".
12. Press F3 (Choices), and select "Yes".
NOTE: Setting "Use spooler" to "Yes" activates the integral spooler
and allows you to return to Harvard Graphics sooner when printing.
With it set to "No", you'll have to wait until the print job is
nearly finished in order to continue working. If you do not wish
to use the integral spooler, (for example, when using an external
hardware or software spooler) set "Use spooler" to "No".
13. Use the arrow keys to position the cursor across from "Quality".
14. Press F3 (Choices).
15. Select one of the following "Quality" options, then press <Enter>.
High: Presentation/best quality.
Medium: Normal/medium quality (faster printing than "High").
Draft: Use to "proof" your work before printing a final copy.
16. Press <Enter>.
17. Press 1 (Program Defaults).
18. Using the arrow keys, move the cursor down to the bottom of the screen
across from "Max. spooler size (K):".
19. Type 3072 as the spooler size, then press <Enter>.
NOTE: This sets the spooler size to approximately 3Mb. Since
Harvard Graphics creates this 3Mb file on your hard disk, make sure
that you have enough disk space to accommodate it. Lowering the
spooler size will increase the time it will take to free up your
PC while printing. If you are using an external spooler (hardware
or software solution), set the "Use spooler" option to "No" in the
Printer Setup Menus.
20. Press the Esc key.
Printing from Harvard Graphics 3.0
----------------------------------
1. From the F6-Main Menu press 5 (Output).
2. Press 1 (Printer 1).
3. Check to see if all of the printing information is correct, then press
F10-Continue to print.
Miscellaneous Notes
-------------------
If white areas of your chart print black (reversed B&W), you may need to
make the following change to your printer setup configuration;
1. From the F6-Main Menu press 8 (Setup).
2. Press 5 (Printer 1).
3. From the Printer 1 Setup Menu select F8 (Options).
4. From the Printer Options menu set "Reverse black and white" to "No".
The Harvard Graphics drivers contained on the "HP DeskJet 510 Printer
Drivers for DOS applications" diskette are developed and licensed by
Software Publishing Corporation solely for use by licensed users of
Harvard Graphics(R) version 3.0.
Copyright 1992 Software Publishing Corporation. All rights reserved.
SOFTWARE PUBLISHING CORPORATION LICENSES THE ENCLOSED ON AN "AS IS"
BASIS WITHOUT ANY WARRANTY WHATSOEVER, AND SPECIFICALLY DISCLAIMS ALL
WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE ENCLOSED, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL SOFTWARE PUBLISHING CORPORATION BE LIABLE
FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING
OUT OF THE USE OF THE ENCLOSED, INCLUDING WITHOUT LIMITATION, FOR LOST
DATA, LOST PROFITS OR BUSINESS INTERRUPTION, WHETHER OR NOT WE HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. DEPENDING ON STATE LAW,
CERTAIN LIMITATIONS CONTAINED HEREIN MAY NOT APPLY TO YOU OR YOU MAY
HAVE OTHER RIGHTS, SO BE SURE TO CHECK.
HARVARD GRAPHICS(R) IS A REGISTERED TRADEMARK OF SOFTWARE PUBLISHING
CORPORATION, SANTA CLARA, CALIFORNIA.
[ENDE]
[123R2]
HP DeskJet 520 Notes
for Lotus(R) 1-2-3(R) Release 2.3, 2.4
Introduction
------------
Lotus printer device drivers are software programs that enable
printers to print text and graphs from Lotus 1-2-3 Release 2.3/2.4 on
DOS-based PCs.
IMPORTANT NOTE
--------------
The HP DeskJet 520 printer is compatible with the HP DeskJet 510 printer.
The Lotus(R) 1-2-3(R) driver included on this driver disk was developed
for the HP DeskJet 510 printer and is recommended for use with your HP
DeskJet 520 printer. Remember to select the HP DeskJet 510 as your
printer model when selecting a printer driver in Lotus(R) 1-2-3(R).
The DeskJet 510 driver included on the "HP DeskJet 520 Printer Drivers for
DOS applications" diskette is intended to create output in the WYSIWYG
(:Print) publishing environment of 1-2-3 for DOS. This driver is not
intended for use in the 1-2-3 native mode (/Print). However, the "HP
DeskJet+ and 500" driver (shipped with 1-2-3) will allow monochrome
printing from the 1-2-3 native mode.
Installation
------------
To properly install the printer driver files for your DeskJet 520 printer,
you'll need to run the Lotus INSTALL program from your hard disk, then
insert the "HP DeskJet 520 Printer Drivers for DOS applications" diskette
in a floppy drive when prompted. For additional information, refer to the
instructions in Chapter 4 of Getting Started (if you have Release 2.3) or
Chapter 5 of Getting Started (if you have Release 2.4).
Follow these general guidelines:
1. Select "Change Selected Equipment".
2. Select "Add New Drivers to the Library".
3. Insert the DeskJet 520 Driver Disk into a floppy drive.
4. Type the name of the floppy drive when prompted by the Lotus INSTALL
program (e.g., A or B).
5. Select "Modify the Current Driver Set".
6. Select "Graphics Printer", "HP", then "DeskJet 520".
7. Select "Return to Previous Menu".
8. Select "Save the Current Driver Set", then <Enter> to accept the
default 123 file name.
9. Press <Enter> at the "GENERATING FONTS" screen.
10. Highlight one of the font options...then press <Enter>.
11. Highlight "Yes" ...then press <Enter>.
12. Press any key to complete the installation.
Setting Up WYSIWYG
------------------
In general, you should do the following;
1. Select :, Print, Config, Printer ...then use the arrow keys to
select "HP DeskJet 510 Paper" as the printer and media type.
2. Press <Enter>.
3. Select Interface ...then use the arrow keys to select the port where
your printer is connected ...then press <Enter>.
4. Select Bin, then Single-Sheet.
5. Press <Enter>.
6. Select the Orientation (Portrait or Landscape) ...then press <Enter>.
7. Select Quit twice to return to your spreadsheet.
Printing From WYSIWYG
---------------------
The following steps assume that the WYSIWYG add-in program is loaded.
1. Select ":" to access the WYSIWYG command line.
2. Select Print, Range, Set ...to select the cells you want to print.
3. Select Go ...to print.
Miscellaneous Notes
-------------------
1. The DeskJet 510 printer driver is intended for use in WYSIWYG and
PrintGraph only.
2. Graphics will print on either paper or transparencies.
3. For normal printing in WYSIWYG, the Paper Bin setting should be set to
"Single-Sheet" for correct page output.
Select ":", P(Print), C(Config), B(Bin), S(Single-Sheet).
This driver was designed to support the graphic printing capabilities of the
DeskJet 520 printer in WYSIWYG mode. For best results when printing ASCII
text based spreadsheets, it is recommended that you use the"DeskJet+, 500"
driver (shipped with 1-2-3) in the 1-2-3 Native Mode for faster results.
The 1-2-3 drivers contained on the "HP DeskJet 520 Printer Drivers for DOS
applications" diskette are licensed by Lotus Development Corporation, solely
for use by Licensed Users of 1-2-3 Release 2.3 or 2.4.
(c) Copyright 1992, Lotus Development Corporation. All rights Reserved.
LOTUS DEVELOPMENT CORPORATION MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, REGARDING THE ENCLOSED, INCLUDING MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT
PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
THERE MAY BE OTHER RIGHTS THAT YOU MAY HAVE WHICH VARY FROM STATE TO
STATE.
LOTUS DEVELOPMENT CORPORATION EXCLUDES ANY WARRANTY COVERAGE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO ABOVE LIMITATIONS
OR EXCLUSION MAY NOT APPLY TO YOU.
Lotus(R) and 1-2-3(R) are registered trademarks of Lotus Development
Corporation.
[ENDE]
[123R3]
HP DeskJet 520 Notes
for Lotus(R) 1-2-3(R) Release 3.1, 3.4
IMPORTANT NOTE
--------------
The HP DeskJet 520 printer is compatible with the HP DeskJet 510 printer.
The Lotus(R) 1-2-3(R) driver included on this driver disk was developed
for the HP DeskJet 510 printer and is recommended for use with your HP
DeskJet 520 printer. Remember to select the HP DeskJet 510 as your printer
model when selecting a printer driver in Lotus(R) 1-2-3(R).
Copying the Driver Files
------------------------
Copying and installing the driver files for 1-2-3 is a 3-step process.
1. Copy the driver files (using the DRIVER.EXE program contained on the
"HP DeskJet 520 Printer Drivers for DOS applications" diskette) to the
1-2-3 directory on your hard disk. NOTE: The files that are copied and
decompressed are font files (*.LRF).
2. Run the INSTDRV.BAT utility contained on the "HP DeskJet 520 Printer
Drivers for DOS applications" diskette. This utility merges files
contained on the floppy with those present on your hard disk (in the
1-2-3 directory). (See below for instructions.)
3. Run the Lotus INSTALL program (on your hard disk) to add the drivers
to your library.
Using the "INSTDRV.BAT" Utility
-------------------------------
Use the installation utility, "INSTDRV.BAT", contained on the "HP DeskJet
520 Printer Drivers for DOS applications" diskette to copy the printer
driver files to the 1-2-3 directory on your hard disk.
1. Insert the DeskJet 520 DOS Driver Disk into a floppy drive.
2. From the DOS prompt on your floppy drive (e.g., A: or B:), run
INSTDRV.BAT by typing INSTDRV followed by the full path name of your
1-2-3 directory and the letter of your floppy drive (the floppy drive
where this disk is located).
For example: INSTDRV C:\123R3 B ...then <Enter>.
In this example the B: drive is the floppy drive where the driver disk
is located. This batch file will copy all the necessary additional
files to the 1-2-3 subdirectory and will modify the INSTALL.DDF file
already present in the 1-2-3 subdirectory. The existing INSTALL.DDF
file will be renamed INSTALL.BAK.
Using the Lotus(R) Install Program
----------------------------------
1. From the 1-2-3 directory on your hard disk type INSTALL ...then <Enter>.
NOTE: Make sure you have copied the WYSIWYG program to your hard
disk during the 1-2-3 installation. The following procedures will
vary slightly if you have not yet completed the Lotus Install
program's "First-Time Installation" process. We recommend that you
complete the First-Time Installation without installing printers,
then follow the steps below to modify your installation and set up
your DeskJet 520.
2. Highlight "Change Selected Equipment" ...then press <Enter>.
3. Highlight "Modify Current DCF" ...then press <Enter>.
4. Highlight "Change Selected Printer" ...then press <Enter>.
5. Highlight "HP" ...then press <Enter>.
6. Press the up arrow to select "HP DeskJet 510" ...then press <Enter>.
7. Press <Enter> again to select "Paper".
NOTE: If you don't want to use transparencies with your printer,
you can skip to step #12. Otherwise continue with step #8.
8. Highlight "Change Selected Printer" ...then press <Enter>.
9. Highlight "HP" ...then press <Enter>.
10. Press the up arrow to select "HP DeskJet 510" ...then press <Enter>.
11. Highlight "Transparency" ...then press <Enter>.
12. Press <Enter> (to Return to Menu).
13. Highlight "Save Changes" ...then press <Enter>.
14. Press <Enter> to accept the changes you've made.
15. At this point in the installation you may need to have your 1-2-3
master disks available. Type the letter for the floppy disk drive
you'll be using ...then press <Enter>.
16. In the "Generating Fonts" opening screen press <Enter> to continue.
17. Highlight one of the font options ...then press <Enter>.
18. Highlight "Yes" ...then press <Enter>.
19. Press any key to complete the installation.
Setting Up 1-2-3
----------------
In general, you should do the following;
1. Select /, Worksheet, Global, Default, Printer, Name ...then use the
arrow keys to select "HP DeskJet 510 Graphics Paper" as your default
printer and media ...then press <Enter>.
2. Select Interface ...then use the arrow keys to select the port where
your printer is connected ...then press <Enter>. (SEE NOTE BELOW)
3. Select Pg-Length, type 60 (for US Ltr Paper), then press <Enter>.
4. Select Quit, Update ...to save your default settings ...then Quit.
Printing From WYSIWYG
---------------------
The following steps assume that the WYSIWYG add-in program is loaded.
(If not, press Alt-F10 to load the WYSIWYG program.)
1. Select ":" to access the WYSIWYG command line.
2. Select Print, Range, Set ...to select the cells you want to print.
3. Select Configuration, Printer ...then use the arrow keys to select
either "HP DeskJet 510 Paper" or "HP DeskJet 510 Transparency".
Press <Enter>.
4. Select the desired Resolution ...then press <Enter>.
NOTE: "Final" = 300 dots per inch resolution
"Draft" = 150 dots per inch resolution
5. Select Bin= "Single sheet".
6. Select Quit, then Go ...to print.
Miscellaneous Notes
-------------------
If you are using the parallel interface connection to your printer, the
printer interface within 1-2-3 should be set to selection 5, "Output
Device LPT1" rather than using the "Parallel 1" selection.
This driver was designed to support the graphic printing capabilities of
the DeskJet 520 printer in WYSIWYG mode. For best results when printing
ASCII text based spreadsheets, it is recommended that you use the
"DeskJet+, 500" driver (shipped with 1-2-3) in the 1-2-3 Native Mode
for faster results.
The Lotus drivers contained on the "HP DeskJet 520 Printer Drivers for
DOS applications" diskette were developed and licensed by Lotus Development
Corporation, solely for use by Licensed Users of 1-2-3 Release 3.1/3.1+/3.4.
(c) Copyright 1992, Lotus Development Corporation. All rights Reserved.
LOTUS DEVELOPMENT CORPORATION MAKES NO WARRANTIES, EITHER EXPRESS
OR IMPLIED, REGARDING THE ENCLOSED, INCLUDING MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. THE EXCLUSION OF IMPLIED WARRANTIES
IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO
YOU. THERE MAY BE OTHER RIGHTS THAT YOU MAY HAVE WHICH VARY FROM
STATE TO STATE.
LOTUS DEVELOPMENT CORPORATION EXCLUDES ANY WARRANTY COVERAGE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO ABOVE LIMITATIONS
OR EXCLUSION MAY NOT APPLY TO YOU.
Lotus(R) and 1-2-3(R) are registered trademarks of Lotus Development
Corporation.
*Lotus(R) 1-2-3(R) is a product of Lotus Development Corporation
[ENDE]
[MSW55]
HP DeskJet 520 Notes
for Microsoft(R) Word, Version 5.5
Installation Notes
------------------
Use the DRIVER.EXE utility contained on the "HP DeskJet 520 Printer
Drivers for DOS applications" diskette to decompress and copy the printer
driver files to the MS Word directory on your hard disk.
Miscellaneous Notes
-------------------
When printing envelopes, the minimum left margin (left edge of return
address) is approximately 0.9".
Graphics printing in landscape mode is not supported.
A problem exists in the driver where strike-out, superscripts, and
subscripts are spaced incorrectly for some proportionally spaced fonts
(CGTimes and Univers).
A problem exists in the driver where small caps do not print correctly
for some of the larger Courier and Letter Gothic fonts.
A problem exists where Letter Gothic 24 pitch, 6 point and 12 point text
will not be justified correctly (the character spacing is incorrect).
A problem exists in the driver where a full page of landscape text may
cause the printer to lose some data and in some cases lock up the printer
(all lights flashing).
These are the printer driver files (PRD files) selectable from the "File,
Printer Setup" menu:
PRD File Name Description of PRD Files
------------- ---------------------------------------------------------
DSK520_P.PRD Portrait fonts resident in the printer;
Courier (modern a), Univers (roman b), CGTimes (roman c),
LetterGothic (roman c).
DSK520_L.PRD Landscape fonts (resident and cartridge based);
Courier (modern a), LetterGothic[7L] (modern e).
The MS Word drivers contained on the "HP DeskJet 520 Printer Drivers for
DOS applications" diskette were developed by Microsoft Corporation,
solely for use by licensed users of Microsoft Word, Version 5.5.
[ENDE]
[MSW60]
HP DeskJet 520 Notes
for Microsoft(R) Word, Version 6.0
Installation Notes
------------------
Use the DRIVER.EXE utility contained on the "HP DeskJet 520 Printer
Drivers for DOS applications" diskette to decompress and copy the printer
driver files to the MS Word directory on your hard disk.
Miscellaneous Notes
-------------------
When printing envelopes, the minimum left margin (left edge of return
address) is approximately 0.9".
Graphics printing in landscape mode is not supported.
A problem exists in the driver where strike-out, superscripts, and
subscripts are spaced incorrectly for some proportionally spaced fonts
(CGTimes and Univers).
A problem exists in the driver where small caps do not print correctly
for some of the larger Courier and Letter Gothic fonts.
A problem exists where Letter Gothic 24 pitch, 6 point and 12 point text
will not be justified correctly (the character spacing is incorrect).
A problem exists in the driver where a full page of landscape text may
cause the printer to lose some data and in some cases lock up the printer
(all lights flashing).
These are the printer driver files (PRD files) selectable from the "File,
Printer Setup" menu;
PRD File Name Description of PRD Files
------------- ---------------------------------------------------------
DSK520_P.PRD Portrait fonts resident in the printer;
Courier (modern a), Univers (roman b), CGTimes (roman c),
LetterGothic (roman c).
DSK520_L.PRD Landscape fonts (resident and cartridge based);
Courier (modern a), LetterGothic[7L] (modern e).
The MS Word drivers contained on the "HP DeskJet 520 Printer Drivers for
DOS applications" diskette were developed by Microsoft Corporation,
solely for use by licensed users of Microsoft Word, Version 6.0.
[ENDE]
[WP51]
HP DeskJet 520 Notes
for WordPerfect(R) Version 5.1
Installation Notes
------------------
Use the utility contained on this diskette to decompress and copy the
printer driver file to the WordPerfect directory on your hard disk.
To select the HP DeskJet 520 printer from WordPerfect, do the following;
1. Press Shift-F7.
2. Select "S - Select Printer".
3. Select "2 Additional Printers".
4. Use the arrow keys to highlight the "HP DeskJet 520" printer.
5. Choose "1 Select", and press <Enter>.
6. Press F7 to exit the help screen, then press F7 again to return to
the "Select Printer: Edit" screen.
7. The "HP DeskJet 520" driver name will be highlighted.
8. Press "1 Select" to select the driver.
Refer to your software program documentation for additional information on
how to select your printer within WordPerfect.
Miscellaneous Notes
-------------------
A printing error may occur if superscripted and/or subscripted text is
placed between two side-by-side graphic images. If this occurs, please
contact WordPerfect Corporation for a work-around solution.
When printing envelopes, the minimum left margin (left edge of return
address) is approximately 0.9".
When using landscape fonts, the minimum left margin should be 0.7" and
the minimum top margin should be 0.3".
Graphics printing in landscape orientation is not supported.
The WordPerfect drivers contained on the "HP DeskJet 520 Printer Drivers
for DOS applications" diskette were developed by WordPerfect Corporation,
solely for use by licensed users of WordPerfect Version 5.1.
[ENDE]
[WP60]
HP DeskJet 520 Notes
for WordPerfect(R) Version 6.0
Installation Notes
------------------
Use the utility contained on this diskette to decompress and copy the
printer driver file to the WordPerfect directory on your hard disk.
To select the DeskJet 520 printer from WordPerfect, do the following;
1. Press Shift-F7.
2. Select "S - Select Printer".
3. Select "2 Additional Printers".
4. Use the arrow keys to highlight the "HP DeskJet 520" printer.
5. Choose "1 Select", and press <Enter>.
6. Press F7 to exit the help screen, then press F7 again to return to
the "Select Printer: Edit" screen.
7. The "HP DeskJet 520" driver name will be highlighted.
8. Press "1 Select" to select the driver.
Refer to your software program documentation for additional information on
how to select your printer within WordPerfect.
Miscellaneous Notes
-------------------
A printing error may occur if superscripted and/or subscripted text is
placed between two side-by-side graphic images on a portrait page if two
conditions are met:
1. a printer font is used between the graphics; and
2. the page is not printed graphically (Print Job Graphically box is not
checked in the Print menu)
This error will not occur for landscape pages. If this error occurs, please
contact WordPerfect Corporation for a work-around solution.
If you are using WordPerfect version 6.0, you may want to upgrade to the
interim release, version 6.0a. Contact WordPerfect for details.
WordPerfect 6.0 does not support printer internal fonts on landscape pages.
To maximize print speed on a portrait page, set Graphics Quality to Medium
and use a printer internal font when possible. For high quality output,
you can set Graphics Quality to High; however, printing time will increase
considerably. If you are printing on HP Transparency or Glossy Media,
Graphics Quality should be set to High for best output.
When printing envelopes, the minimum left margin (left edge of return
address) is approximately 0.9".
The WordPerfect drivers contained on the "HP DeskJet 520 Printer Drivers
for DOS applications" diskette were developed by WordPerfect Corporation,
solely for use by licensed users of WordPerfect, Version 6.0.
[ENDE]
[WORKS]
HP DeskJet 520 Notes
for Microsoft(R) Works, Version 3.0
Installation Notes
------------------
Use the utility contained on this diskette to decompress and copy the
printer driver file to the Works directory on your hard disk.
To select the DeskJet 520 printer from Works, do the following;
1. Press Alt.
2. Select "P - Printer".
3. Select "S - Printer Setup".
4. Press the Tab key to select the "Change Printer & Option..." button,
and press <Enter>.
5. Use the arrow keys to highlight the "HP DeskJet 520" printer,
and press <Enter>.
6. The "HP DeskJet 520" driver name will be displayed along with
additional options (e.g., Graphics, Paper Source...).
7. To save and exit, press the Tab key to select the "OK" button and
press <Enter>.
Refer to your software program documentation for additional information
on how to select your printer within Works.
[ENDE]
[WS]
HP DeskJet 510 Notes
for WordStar(R), Version 7.0d
IMPORTANT NOTE
--------------
The HP DeskJet 520 printer is compatible with the HP DeskJet 510 printer.
The WordStar(R) driver included on this driver disk was developed for the
HP DeskJet 510 printer and is recommended for use with your HP DeskJet
520 printer. Remember to select the HP DeskJet 510 as your printer model
when selecting a printer driver in WordStar(R).
This driver is intended ONLY for WordStar Ver. 7.0d. If you have a
previous version, contact WordStar International Corporation to upgrade
to version 7.0d.
Installation Notes
------------------
Use this utility to copy and decompress the printer driver files to your
WordStar directory.
Selecting the Printer in WINSTALL
---------------------------------
1. Run the WINSTALL program provided with your WordStar package.
2. Highlight "Modify or install a printer (PRCHANGE)" and press <Enter>.
3. In the "Installed Printer Menu", type a new PDF name as follows;
DJ510 (or DJ510) ...then press <Enter>.
4. Highlight "Extra database" ...then press <Enter>.
5. Highlight "Hewlett-Packard DeskJet 510" ...then press <Enter>.
6. Highlight "Select printer adapter port", press <Enter> and choose
the interface port (e.g., LPT1, etc.).
7. Highlight "Return to Installed Printer Menu" ...then press <Enter>.
8. Type "Y" (Yes) if you want the DeskJet 510 to be your default printer.
9. Press F10-Finished.
10. Highlight "Save and return to DOS" ...then press <Enter>.
For additional information on how to select and configure your printer
within WordStar, refer to your software program documentation.
Miscellaneous Notes
-------------------
The paper size defaults to US Letter (8.5" x 11"). Use the Layout pulldown
menu to select A4 or other paper sizes and types. Transparency and glossy
media printing is implemented with .bn commands.
Use WSCHANGE to set the super/subscript roll to 0 (.sr 0) to take full
advantage of hardware superscript and subscript positioning. This is
necessary when you are printing graphics adjacent to text and are using
footnotes or explicit subscripts or superscripts.
Stacked envelopes (using MailList) will print with a wide left margin unless
you create a macro to select landscape printing rather than choosing envel-
opes. The minimum left margin is approximately 0.5" in landscape mode,
whereas in envelope mode the minimum is 0.9".
Graphics printing in landscape orientation is not supported.
A graphic image that overlaps another graphic image may cause one of the
images not to print, even though both images may be previewed on screen.
If this problem occurs, resize (shrink) one of the graphics to correct
the problem.
The WordStar drivers contained on the "HP DeskJet 510 Printer Drivers for
DOS applications" diskette were developed by WordStar International
Corporation, solely for use by licensed users of WordStar, Version 7.0d.
[ENDE]
[INSET]
HP DeskJet 520 Notes
for WordStar(R) 7.0d InSet Graphics
IMPORTANT NOTE
--------------
The HP DeskJet 520 printer is compatible with the HP DeskJet Portable
printer. The InSet driver included on this driver disk was developed for
the HP DeskJet Portable printer and is recommended for use with your HP
DeskJet 520 printer. Remember to select the HP DeskJet Portable as your
printer model when selecting a printer driver in InSet.
This driver is intended ONLY for WordStar Version 7.0d. If you have a
previous version, contact WordStar International Corporation to upgrade
to version 7.0d.
Installation Notes
------------------
1. Use the DRIVER.EXE utility contained on the "HP DeskJet 520 Printer
Drivers for DOS Applications" diskette to decompress and copy the driver
files to the INSET subdirectory of your WordStar directory (e.g.,
C:\WS\INSET)
2. After using the installation utility to copy the drivers, run the SETUP
program from the INSET directory on your hard disk.
3. Select "C Printer....:" and choose the "HPDJPORT HP DeskJet Portable"
printer selection
4. You may want to increase the number of "E 4K Buffers..." and the
"R Max .PIX Size.." to accomodate large graphic images
[ENDE]
