E&a8L(s12h12v3b6THP DeskJet 520 Application Note
&d4Dfor Lotus(R) 1-2-3(R) Release 2.3 & 2.4&d@(s0B


&d1D(s3BIntroduction&d@(s0B
Lotus printer device drivers are software programs that enable
printers to print text and graphs from Lotus 1-2-3 Release 2.3/2.4 on
DOS-based PCs.


&d1D(s3BIMPORTANT NOTE:&d@(s0B  The HP DeskJet 520 printer is compatible with the HP DeskJet
510 printer.  The Lotus(R) 1-2-3(R) driver included on this driver disk was 
developed for the HP DeskJet 510 printer and is recommended for use with your HP 
DeskJet 520 printer.  Remember to select the HP DeskJet 510 as your printer model 
when selecting a printer driver in Lotus(R) 1-2-3(R).

The DeskJet 510 driver included on the "HP DeskJet 520 Printer Drivers for
DOS applications" diskette is intended to create output in the WYSIWYG (:Print) 
publishing environment of 1-2-3 for DOS.  This driver is not intended for use 
in the 1-2-3 native mode (/Print).  However, the "HP DeskJet+ and 500" driver 
(shipped with 1-2-3) will allow monochrome printing from the 1-2-3 native mode.


&d1D(s3BInstallation&d@(s0B
To properly install the printer driver files for your DeskJet 520 printer, you'll 
need to run the Lotus INSTALL program from your hard disk, then insert the "HP 
DeskJet 520 Printer Drivers for DOS applications" diskette in a floppy drive when 
prompted.  For additional information refer to the instructions in Chapter 4 of 
Getting Started (if you have Release 2.3) or Chapter 5 of Getting Started (if you 
have Release 2.4).

Follow these general guidelines:
 
 1. Select "Change Selected Equipment".
 
 2. Select "Add New Drivers to the Library".
 
 3. Insert the DeskJet 520 Driver Disk into a floppy drive.
 
 4. Type the name of the floppy drive when prompted by the Lotus INSTALL
    program (e.g., A or B).
 
 5. Select "Modify the Current Driver Set".
 
 6. Select "Graphics Printer", "HP", then "DeskJet 510".
 
 7. Select "Return to Previous Menu".
 
 8. Select "Save the Current Driver Set", then <Enter> to accept the
    default 123 file name.
 
 9. Press <Enter> at the "GENERATING FONTS" screen.

10. Highlight one of the font options...then press <Enter>.

11. Highlight "Yes" ...then press <Enter>.

12. Press any key to complete the installation.


&d1D(s3BSetting Up WYSIWYG&d@(s0B
In general, you should do the following;
 

 1. Select :, Print, Config, Printer  ...then use the arrow keys to 
    select "HP DeskJet 510 Paper" as the printer and media type.
 
 2. Press <Enter>.
 
 3. Select Interface  ...then use the arrow keys to select the port where
    your printer is connected  ...then press <Enter>.
 
 4. Select Bin, then Single-Sheet.
 
 5. Press <Enter>.
 
 6. Select the Orientation (Portrait or Landscape) ...then press <Enter>.
 
 7. Select Quit twice to return to your spreadsheet.


&d1D(s3BPrinting From WYSIWYG&d@(s0B
The following steps assume that the WYSIWYG add-in program is loaded.
 
 1. Select ":" to access the WYSIWYG command line.
 
 2. Select Print, Range, Set ...to select the cells you want to print.
 
 3. Select Go  ...to print.


&d1D(s3BMiscellaneous Notes&d@(s0B
The DeskJet 510 printer driver is intended for use in WYSIWYG and PrintGraph only.
 
Graphics will print on either paper or transparencies.
 
For normal printing in WYSIWYG, the Paper Bin setting should be set to "Single 
Sheet" for correct page output.  Select ":", P(Print), C(Config), B(Bin), 
S(Single Sheet).

This driver was designed to support the graphic printing capabilities of the 
DeskJet 520 printer in WYSIWYG mode.  For best results when printing ASCII text 
based spreadsheets, it is recommended that you use the"DeskJet+, 500" driver 
(shipped with 1-2-3) in the 1-2-3 Native Mode for faster results.


The 1-2-3 drivers contained on the "HP DeskJet 520 Printer Drivers for DOS 
applications" diskette are licensed by Lotus Development Corporation, solely for 
use by Licensed Users of 1-2-3 Release 2.3 or 2.4.

(c) Copyright 1992, Lotus Development Corporation.  All rights Reserved.

LOTUS DEVELOPMENT CORPORATION MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, 
REGARDING THE ENCLOSED, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE.  THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES.  
THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.  THERE MAY BE OTHER RIGHTS THAT YOU 
MAY HAVE WHICH VARY FROM STATE TO STATE.

LOTUS DEVELOPMENT CORPORATION EXCLUDES ANY WARRANTY COVERAGE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO ABOVE LIMITATIONS OR EXCLUSION MAY NOT 
APPLY TO YOU.

Lotus(R) and 1-2-3(R) are registered trademarks of Lotus Development Corporation.E