Installing Lotus 123 r2.2 ALLWAYS drivers for the Canon BJ Printers
-------------------------------------------------------------------


Introduction
------------

The supported printers in the Canon BJ-Series are the BJ-10e, BJ-300
and BJ-330.  The BJ-300 and the BJ-330 can work in two modes, IBM Pro-
Printer mode and Epson LQ mode. Dip switches must be set to select one
of these modes and details of how to do this are in the User Manual. The
BJ-10e can only operate in IBM ProPrinter mode.

Installation
------------
Copy the appropriate printer driver to your ALLWAYS directory.

The ALLWAYS graphics printer drivers are :
   CBJ180E.APD       180x180 Epson LQ driver
   CBJ360E.APD       360x180 Epson LQ driver
   CBJ180P.APD       180x180 IBM ProPrinter Driver
   CBJ360P.APD       360x180 IBM ProPrinter Driver


Example
-------

To install the 360x180 Allways ProPrinter driver, with
ALLWAYS on C:\123\ALLWAYS from a floppy in drive A:

Place the Canon Lotus 22 disk in drive A:

   Type
     A:
   then press ENTER to change to drive A:

   Type :
     COPY CBJ360P.APD  C:\123\ALLWAYS/b
   then press ENTER

   Type
     C:
   then press ENTER to change to drive C:

   Type
     CD \123
   the press ENTER to change to the Lotus 123 directory


    Run Lotus 123 in the usual way. Then when you have invoked
    the ALLWAYS add-in ( see Lotus documentation for details)
    Choose PRINTER and CONFIGURE and select the driver.