Winbond W89C940 Boot ROM Program (ver 1.01)
	     (note : rboot.rom	Feb 26, 1996 11:05 AM)

(A) How to use OEM.EXE ?
    (a) OEM.EXE and RBOOT.ROM should be put in the same directory.
    (b) OEM.EXE is executed.(no parameters is necessary)
	--> the program will ask user to input vendor ID
	    and device ID.
    (c) The steps that is mentioned above is followed, vendor ID
	and device ID in the program will be modified.

(B) After vendor ID and device ID are modified, RBOOT.ROM should
    be burned into a PROM. This RBOOT.ROM size is 16K. If user uses
    64K PROM, you should duplicate the same 3 copies RBOOT.ROM file
    and combine these files.(i.e.: 16k * 4 contents will be burned
    into a PROM.)
    <method> :
	copy RBOOT.ROM /b + RBOOT.ROM /b + RBOOT.ROM /b + RBOOT.ROM /b	CCC
    (note : CCC file size will be 64K)

(C) Vendor ID and device ID of EEPROM in the LAN card should be the same
    as vendor ID and device ID in the program.