Link Support 
;The IPXODI protocol stack does not use the Link Support Layer communications
;buffers or mempools buffers. 

Link Driver smcarcws

	INT #1 9 
;Interrupt, any valid setting for the installed board may be used.  
;Int's 2 and 9 are the same and are interchangeable. 
;Default=2


	PORT #1 2E0
;I/O port address, any valid setting for the installed board may be used.
;Default=2E0

;	MEM #1 D0000
;Ram buffer address, required for 8 bit boards only.  
;Any valid setting for the installed board may be used.
;Default=D0000

;	Slot {number}
;PS/2 only.  Microchannel machines require only the slot number be given.
;INT, PORT, and MEM parameters are defined with the PS/2 reference disk.


;for more information consult the NetWare ODI shell for DOS manual