The attached file is a tar format. please copy this file on you Hard disk and do : tar xvf 8216sco.tar STANDARD MICROSYSTEM CORPORATION SCO LLI 3.1 UNIX driver INSTALLATION GUIDE This software is licensed by SMC for use by its customers only. Copyright (c) 1993 Standard Microsystems Corporation. All rights reserved. This installation guide explains how to: *Install the SMC Ethernet LAN UNIX Driver files from the distribution disk by using the SCO "CUSTOM" program. This driver supports all SMC Ethernet (80xx/8216) ISA and MCA LAN Adapters 1. INSTALLING SMC Ethernet LLI Driver Disk ------------------------------------------------------------ You must be login as root to perform this task. Shutdown the system and go to System Maintenance mode. a) At the shell prompt, type: custom b) When you see the Custom menu, the Install option is highlighted. Press <Enter> to begin the installation. c) CUSTOM highlights A New Product. Press <Enter> d) CUSTOM offers you a choice of installing the Entire Product, Packages, or files. CUSTOM highlights Entire Products. e) Press <Enter> to select the Entire Product option. f) CUSTOM directs you to insert Distribution Floppy vol1. g) Insert "Standard Microsystems Ethernet LLI Driver Disk" Vol1 in the drive, then press <Enter>. h) After the prep script, CUSTOM again prompts you to insert the Standard Microsystems Ethernet LLI Driver Disk Vol1 and highlights the Continue option. i) verify that Volume 1 is in the drive, then press <Enter>. j) When the driver is all installed, the following message appears at the bottom of your screen. ---------------------------------- After installing the SMC Ethernet LAN Adapter Disk, please use netconfig to add drivers to your system? press <Enter> to continue. ---------------------------------- k) Press any key to continue with installation. The following message appears briefly on the screen: --------------------------------- Checking file permissions .... --------------------------------- You return to the main CUSTOM menu. The software list on your screen now includes the: "SMC Ethernet LAN Adapter LLI Driver Disk" 1) Use -> to highlight the quit option, and press <Enter>. m) For SMC/WD 80xx type; use the EZSETUP ( or SMCSETUP) to configure the adapters. Faor SMC8216 use EZSTART from the SuperDisk (DOS) to configure these cards. The configuration value (IO, Ram-Base, Range and IRQ) must match what you will select in step (n). n) Use the netconfig the configure SMC Ethernet Driver to work with SCO UNIX and networking stack. Please refer to the appendixes in the Release and Installation SCO LLI Driver Disk 3.1.0 for the appropriate configuration scenario for your networking stack.