STANDARD MICROSYSTEMS CORPORATION

            Novell NetWare Client for Microsoft Windows NT
                      For Ethernet LAN Adapters

                         INSTALLATION GUIDE 

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1993 Standard Microsystems Corporation.
                         All rights reserved.



This installation guide describes:

o  How to use EZStart to copy the Novell NetWare Client for
   Microsoft Windows NT files from the SuperDisk to your PC.

o  How to install the LAN driver in Microsoft Windows NT that is
   running the Novell Netware Services for Windows NT.

Note: This driver supports all 8216 (Ultra) and 80xx (PLUS) Series
      ISA and Micro Channel Ethernet adapters. This driver also 
      supports the Novell 32-bit client specification, which allows 
      the driver to work with Windows NT, UnixWare, and other 32-bit 
      Intel-based operating systems. Contact Novell for more 
      information.


COPYING THE DRIVER FILES

From the EZStart Driver Installation screen, select 'Copy Files' to 
copy all the files used by this driver from the SuperDisk to the 
Destination Directory recommended by EZStart, or to a different 
directory that you specify.

The EZStart default for copying files is a:\, as the Destination
Directory.  Please make a backup copy of your SuperDisk before EZStart
copies files to the SuperDisk.


INSTALLING THE SMC8000 DRIVER IN Windows NT RUNNING Netware SERVICES

Important: If you are not using the SMC SuperDisk, make sure the
           DISK.ID file is in the root directory of the disk you are 
           using, and that the OEMSETUP.INF and SMC8000.LAN files 
           reside in the root directory or a subdirectory on the disk 
           you are using.

1. Log on to your NT system as an Administrator or equivalent.

2. From the Program Manager's "Main" window, double-click on the 
   "Control Panel" icon.

3. Double-click on "Network". The Network Settings dialog box 
   appears.

4. Select "Add Software".

5. Scroll down the list box to "<Other> Requires disk from 
   manufacturer". Select this option followed by "Continue". You 
   are prompted for a disk in Drive A.

6. Insert the NetWare Client for MS Windows NT diskette into your
   computer's floppy drive and select "OK".

7. Select "NetWare Services for Windows NT" followed by "OK".

8. From the Add Network Software dialog box, select "Continue".

9. From the MS Windows NT Setup dialog box, select "OK". Setup copies
   NetWare files to their appropriate directories and adds them to the
   installed software list.

10. From the Network Settings dialog box, select "Add Adapter".

11. Scroll down the list box to "<Other> Requires disk from 
    manufacturer". Select this option followed by "Continue". You are 
    prompted for a disk in Drive A.

12. Insert the SMC SuperDisk.

13. Enter the path where you want the SMC driver and information files
    reside. For example, if these files reside on the SuperDisk in 
    drive A, type: A:\NW386_40.

14. Select "OK".

15. Select "ODI SMC8000 Adapter for NetWare" followed by "OK". A 
    dialog box appears, so you can specify the settings for your SMC 
    Ethernet adapter.

16. Specify the options for your SMC Ethernet adapter.

17. Select "OK". The driver you selected appears in the "Installed
    Adapters List".

18. If you need both NetWare and MS Windows NT networking services,
    and you are using a single SMC Ethernet adapter, proceed to step 
    19.

    OR

    If you have a separate network adapter for each networking 
    service, proceed to step 22.

19. From the "Installed Adapter Cards" list, select the NDIS (non-ODI)
    driver for the SMC Ethernet adapter you just configured, followed 
    by "Remove".  This step is not necessary if you do not have the 
    NDIS driver installed.

20. From the Network Settings dialog box, select "Add Adapter".

21. From the list box, select "ODI Support for NDIS Protocols Adapter
    (ODINSUP)" followed by "Continue". "ODI Support for NDIS 
    Protocols Adapter (ODINSUP)" appears in the "Installed Adapter
    Cards" list. Any pre-installed MS Windows NT networking software 
    will now bind to this adapter.

22. From the Network Settings dialog box, select "Bindings" to view 
    the NetWare drive bindings.

23. After exiting the Network Settings dialog box, you are prompted
    to restart your system. You must restart your system for NetWare
    Services to become active.



SMC and Standard Microsystems are registered trademarks; and EtherCard
Elite 16 Ultra, EtherCard Elite 16T Ultra, EtherCard Elite 16C Ultra,
Elite Series, EliteView, EZStart, SuperDisk, and UltraChip are
trademarks of Standard Microsystems Corporation.  Other products and
company names are registered trademarks or trademarks of their
respective holders.