VER: 1.01
SYN: 1.00
DR SMC8000
{
Des: $SMC8000_DRIVER_DESCRIPTION
Help: $SMC8000_DRIVER_HELP
File: $SMC8000_DRIVER_FILE
Par: 1.00
Timeout: 5
PROMPT PORT
if(BUS != MCA) REQUIRED
else HIDDEN
{
Type: HEX(3)
Values: 280, 200, 220, 240, 260, 2A0, 2C0, 2E0, 300, 320, 340, 360, 380
Default: 280
ReservedLength: 20
}
PROMPT SLOT
if(BUS == MCA) REQUIRED
else HIDDEN
{
Type: HEX(1)
Values: 1, 2, 3, 4, 5, 6, 7
}
PROMPT MEMORY OPTIONAL
{
Help: $SMC8000_1
Type: HEX(5)
Values: C0000,C2000,C4000,C6000,C8000,CA000,CC000,CE000,D0000,D2000,D4000,D6000,D8000,DA000,DC000,DE000
Default: UNDEFINED
ReservedLength: 200
}
PROMPT INT OPTIONAL
{
Help: $SMC8000_2
Type: HEX(2)
Values: 3, 4, 5, 7, 9, A, B, F
Default: UNDEFINED
}
FRAME FrameSelect
{
Help:$SMC8000_3
CD: $SMC8000_4
CH: 'Ethernet_802.3'
CD: $SMC8000_5
CH: 'Ethernet_802.2'
CD: $SMC8000_6
CH: 'Ethernet_SNAP'
CD: $SMC8000_7
CH: 'Ethernet_II'
Def: 2, 1
}
}
DLANG: 4
;English
$SMC8000_1 = "This value is not required for soft-configured adapters."
$SMC8000_2 = "This value is not required for soft-configured adapters."
$SMC8000_3 = "The default frame type is 802.2.
You can remove this frame type or
add the 802.3, 802.2 SNAP, or the Ethernet II frame
types."
$SMC8000_4 = "802.3"
$SMC8000_5 = "802.2"
$SMC8000_6 = "802.2 SNAP"
$SMC8000_7 = "Ethernet II"
; default English
$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
or a microchannel NetWare server. You can have
maximum of four network boards in your server.
Their settings must not conflict.\n\n You can load
the driver for each board and for each additional
frame type assigned to the board (Maximum: 16 times).
The driver loads reentrantly.\n"
$SMC8000_DRIVER_FILE = "SMC8000.LAN"
LANG: 6
;French
$SMC8000_1 = "This value is not required for soft-configured adapters."
$SMC8000_2 = "This value is not required for soft-configured adapters."
$SMC8000_3 = "The default frame type is 802.2.
You can remove this frame type or
add the 802.3, 802.2 SNAP, or the Ethernet II frame
types."
$SMC8000_4 = "802.3"
$SMC8000_5 = "802.2"
$SMC8000_6 = "802.2 SNAP"
$SMC8000_7 = "Ethernet II"
; default English
$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
or a microchannel NetWare server. You can have
maximum of four network boards in your server.
Their settings must not conflict.\n\n You can load
the driver for each board and for each additional
frame type assigned to the board (Maximum: 16 times).
The driver loads reentrantly.\n"
$SMC8000_DRIVER_FILE = "SMC8000.LAN"
LANG: 7
;German
$SMC8000_1 = "This value is not required for soft-configured adapters."
$SMC8000_2 = "This value is not required for soft-configured adapters."
$SMC8000_3 = "The default frame type is 802.2.
You can remove this frame type or
add the 802.3, 802.2 SNAP, or the Ethernet II frame
types."
$SMC8000_4 = "802.3"
$SMC8000_5 = "802.2"
$SMC8000_6 = "802.2 SNAP"
$SMC8000_7 = "Ethernet II"
; default English
$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
or a microchannel NetWare server. You can have
maximum of four network boards in your server.
Their settings must not conflict.\n\n You can load
the driver for each board and for each additional
frame type assigned to the board (Maximum: 16 times).
The driver loads reentrantly.\n"
$SMC8000_DRIVER_FILE = "SMC8000.LAN"
LANG: 8
;Italian
$SMC8000_1 = "This value is not required for soft-configured adapters."
$SMC8000_2 = "This value is not required for soft-configured adapters."
$SMC8000_3 = "The default frame type is 802.2.
You can remove this frame type or
add the 802.3, 802.2 SNAP, or the Ethernet II frame
types."
$SMC8000_4 = "802.3"
$SMC8000_5 = "802.2"
$SMC8000_6 = "802.2 SNAP"
$SMC8000_7 = "Ethernet II"
; default English
$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
or a microchannel NetWare server. You can have
maximum of four network boards in your server.
Their settings must not conflict.\n\n You can load
the driver for each board and for each additional
frame type assigned to the board (Maximum: 16 times).
The driver loads reentrantly.\n"
$SMC8000_DRIVER_FILE = "SMC8000.LAN"
LANG: 14
;Spanish
$SMC8000_1 = "This value is not required for soft-configured adapters."
$SMC8000_2 = "This value is not required for soft-configured adapters."
$SMC8000_3 = "The default frame type is 802.2.
You can remove this frame type or
add the 802.3, 802.2 SNAP, or the Ethernet II frame
types."
$SMC8000_4 = "802.3"
$SMC8000_5 = "802.2"
$SMC8000_6 = "802.2 SNAP"
$SMC8000_7 = "Ethernet II"
; default English
$SMC8000_DRIVER_DESCRIPTION ="SMC Ethernet Adapter Server Driver"
$SMC8000_DRIVER_HELP = "You can use this driver in an ISA (AT bus), EISA,
or a microchannel NetWare server. You can have
maximum of four network boards in your server.
Their settings must not conflict.\n\n You can load
the driver for each board and for each additional
frame type assigned to the board (Maximum: 16 times).
The driver loads reentrantly.\n"
$SMC8000_DRIVER_FILE = "SMC8000.LAN"
