;***********************************************************************
;
; 07/08/94 v1.00a
; Novell NT Requestor Windows NT .INF file.
;
; SMC Ethernet (for 8416, 8216 and 80x3 adapters)
; SMC8000.INF
;
; Novell SMC8000 network card SETUP INF file.
;
;***********************************************************************
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA and MCA
;-----------------------------------------------------------------------
[PlatformsSupported]
ISA
EISA
MCA
"Jazz-Internal Bus"
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
ODI_SMC8000
[LanguagesSupported]
ENG
[OptionsTextENG]
ODI_SMC8000 = " ODI SMC 8000 Adapter for NetWare"
;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************
[FileConstants]
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
NwSubsInf = "NWSUBS.INF"
Exit_Code = 0
;ShellCode = 0
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
; Product Info
;
Manufacturer = "Novell"
ProductMajorVersion = "0"
ProductMinorVersion = "9"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Hardware
;
DriverName = "OdiLoad"
OdiModules = "ODI_Modules"
ProductHardwareName = "SMC8000"
ProductHardwareODI_SMC8000Title = "ODI SMC 8000 Adapter for NetWare"
NetRuleHardwareType = "nwSMC8000 nwAdapter"
NetRuleHardwareBindForm = " yes yes container"
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(DriverName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
;
; Dialog Parameters
;
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
IOBaseAddrHexList = ^(IOBaseAddrChoices, 1)
IOBaseAddrDecList = ^(IOBaseAddrChoices, 2)
IOBaseAddrNwList = ^(IOBaseAddrChoices, 3)
MemAddrHexList = ^(MemAddrChoices, 1)
MemAddrDecList = ^(MemAddrChoices, 2)
MemAddrNwList = ^(MemAddrChoices, 3)
[IRQChoices]
IRQ_0 = "3",3
IRQ_1 = "4",4
IRQ_2 = "5",5
IRQ_3 = "7",7
IRQ_4 = "9",9
IRQ_5 = "10",A
IRQ_6 = "11",B
IRQ_7 = "15",F
[IOBaseAddrChoices]
IOBase_1 = "0x200",512,"200"
IOBase_2 = "0x220",544,"220"
IOBase_3 = "0x240",576,"240"
IOBase_4 = "0x260",608,"260"
IOBase_5 = "0x280",640,"280"
IOBase_6 = "0x2A0",672,"2A0"
IOBase_7 = "0x2C0",704,"2C0"
IOBase_8 = "0x2E0",736,"2E0"
IOBase_9 = "0x300",768,"300"
IOBase_10= "0x320",800,"320"
IOBase_11= "0x340",832,"340"
IOBase_12= "0x360",864,"360"
IOBase_13= "0x380",896,"380"
[MemAddrChoices]
MemAddr_1 = "0x00000",000000,"00000"
MemAddr_2 = "0xC0000",768432,"C0000"
MemAddr_3 = "0xC2000",794624,"C2000"
MemAddr_4 = "0xC4000",802816,"C4000"
MemAddr_5 = "0xC6000",811008,"C6000"
MemAddr_6 = "0xC8000",819200,"C8000"
MemAddr_7 = "0xCA000",827392,"CA000"
MemAddr_8 = "0xCC000",835584,"CC000"
MemAddr_9 = "0xCE000",843776,"CE000"
MemAddr_10 = "0xD0000",851968,"D0000"
MemAddr_11 = "0xD2000",860160,"D2000"
MemAddr_12 = "0xD4000",868352,"D4000"
MemAddr_13 = "0xD6000",876544,"D6000"
MemAddr_14 = "0xD8000",884736,"D8000"
MemAddr_15 = "0xDA000",892928,"DA000"
MemAddr_16 = "0xDC000",901120,"DC000"
MemAddr_17 = "0xDE000",909312,"DE000"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
DlgType = "Combination"
DlgTemplate = "UBNDIS"
Caption = $(FunctionTitle)
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
Label3 = "&Memory Base Address:"
Combo1List = $(IRQList)
Combo1Out = $(IRQValue)
Combo2List = $(IOBaseAddrHexList)
Combo2Out = $(IOBaseAddress)
Combo3List = $(MemAddrHexList)
Combo3Out = $(MemAddress)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADN2_INS)
[FileConstantsENG]
ProCaption = "NetWare for Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "NetWare for Windows NT is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "SMC SMC8000 Adapter Setup"
ProductSoftwareDescription = "ODI SMC 8000 Adapter Driver"
ProductHardwareODI_SMC8000Description = "ODI SMC 8000 Adapter for NetWare"
[GeneralConstants]
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;----------InstallOption-------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; extract parameters
;
set !DebugOutputControl = 1
Debug-Output "OEMNADNS.INF: Debug is on!!!!!!!"
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Debug-Output "OEMNADNS.INF: STF_CWDIR is: "$(!STF_CWDIR)
; define all the constants
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Set IRQValue = *($(IRQList),1)
Set IOBaseAddrValue = *($(IOBaseAddrDecList),5)
Set MemAddrValue = *($(MemAddrDecList),9)
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
set AddCopy = YES
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
goto adapteroptions
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADNS.INF: Cannot find component product key "$(!NTN_RegBase)
goto fatalregistry
Endif
Endif
Set AdapterNumber = ""
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "OEMNADNS.INF: Shelling to FindService to utility"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: FindService shell failure "$($ShellCode)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "OEMNADNS.INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADNS.INF: Cannot find component service "$(!NTN_RegBase)
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValue = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrValue = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set MemAddrValue = $(ValueData)
endif
EndForListDo
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 1)
endif
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrDecList), 5)
endif
ifstr(i) $(MemAddrValue) == ""
set MemAddrValue = *($(MemAddrDecList), 9)
endif
;
; Read the symbolic link to the ODI entry from the "OdiLoadName" value
;
GetRegValue $(KeyParameters),"OdiLoadName", CardInstanceList
Set CardInstanceName = *($(CardInstanceList),4)
adaptersetup =+
goto adapteroptions
;
; Let the user bang on the options until satisfied.
;
adapteroptions = +
set from = adapteroptions
set IOBaseAddress = *($(IOBaseAddrHexList), ~($(IOBaseAddrDecList), +
$(IOBaseAddrValue)))
set MemAddress = *($(MemAddrHexList), ~($(MemAddrDecList), +
$(MemAddrValue)))
Ifstr(i) $(!STF_BUSTYPE) == MCA
goto checkforexisting
Endif
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IRQValue = $(Combo1Out)
set IOBaseAddress = $(Combo2Out)
set MemAddress = $(Combo3Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
;
; Unknow command
;
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
set IOBaseAddrValue = *($(IOBaseAddrDecList), +
~($(IOBaseAddrHexList),$(IOBaseAddress)))
set MemAddrValue = *($(MemAddrDecList), +
~($(MemAddrHexList),$(MemAddress)))
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
checkforexisting = +
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
Debug-Output "Shelling to utility to addhardwarecomponent"
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: Cannot add hardware component "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADNS.INF: Registry error: add hardware component "$(RegistryErrorIndex)
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
Set-add TempAdapterNumber = $(AdapterNumber),0
set CardInstanceName = $(ProductHardwareName)" #"$(TempAdapterNumber)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{OdiAdapter,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: AddValueList ShellCode error "$($ShellCode)
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: AddValueList ShellCode error "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADNS.INF: AddValueList Resgitry error "$(RegistryErrorIndex)
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
SetRegValue $(KeyParameters) {OdiLoadName,$(NoTitle),$(!REG_VT_SZ),$(CardInstanceName)}
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: GetBusTypeNum ShellCode error "$($ShellCode)
goto ShellCodeError
endif
;
; Add the rest of the parameters to the Services area
;
set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemAddrValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: AddValueList ShellCode error "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "OEMNADNS.INF: AddValueList Registry error "$(RegistryErrorIndex)
goto fatalregistry
endif
;
; TRAVIS: Put the ODILOAD update info here!
;
Debug-Output "OEMNADNS.INF: Add ODILOAD Parameters"
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(DriverName) $(MAXIMUM_ALLOWED) KeyOdiLoad
Ifstr $(KeyOdiLoad) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADNS.INF: Cannot open service "$(DriverName)
goto fatalregistry
Endif
Set KeyOdiCard = $(KeyNull)
Debug-Output "OEMNADNS.INF: CardInstanceName = "$(CardInstanceName)
;
; Try to create Odi_Modules registry key. If this fails try to open the key.
; If this fails exit.
;
CreateRegKey $(KeyOdiLoad) {$(OdiModules),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyOdiModules
Ifstr(i) $(KeyOdiModules) == $(KeyNull)
OpenRegKey $(KeyOdiLoad) "" $(OdiModules) $(MAXIMUM_ALLOWED) KeyOdiModules
Ifstr(i) $(KeyOdiLoad) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find OdiLoad\"$(OdiModules)
goto fatalregistry
Endif
Endif
Ifstr(i) $(AdapterNumber) != ""
; This adapter was just installed; allow creation of the #nn key
CreateRegKey $(KeyOdiModules) {$(CardInstanceName),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" KeyOdiCard
Endif
Ifstr(i) $(KeyOdiCard) == $(KeyNull)
;
; This is either an old card, or a prior version of the key existed.
;
OpenRegKey $(KeyOdiModules) "" $(CardInstanceName) $(MAXIMUM_ALLOWED) KeyOdiCard
Ifstr(i) $(KeyOdiCard) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONEXT_SERVICE
Debug-Output "OEMNADNX.INF: Can't create OdiLoad\"$(CardInstanceName)
goto fatalregistry
Endif
Endif
;
; Set this cards configuration info for OdiLoad. Load all frame types, this is
; required for ODINSUP (ODI NDIS Support) to work.
;
set IOBaseAddressNw = *($(IOBaseAddrNwList), ~($(IOBaseAddrHexList),+
$(IOBaseAddress)))
set MemAddressNw = *($(MemAddrNwList), ~($(MemAddrHexList),+
$(MemAddress)))
Debug-Output "OEMNADNS.INF: IOBaseAddressNw = "$(IOBaseAddressNw)
Debug-Output "OEMNADNS.INF: MemAddressNw = "$(MemAddressNw)
set OdiParmList = {"Frame ETHERNET_802.3", +
"Frame ETHERNET_802.2", +
"Frame ETHERNET_II", +
"Frame ETHERNET_SNAP"}
Ifstr(i) $(!STF_BUSTYPE) != MCA
Set OdiParmList = >($(OdiParmList), "Port "$(IOBaseAddressNw))
Set OdiParmList = >($(OdiParmList), "Int "$(IRQValue))
Set OdiParmList = >($(OdiParmList), "Mem "$(MemAddressNw))
Endif
SetRegValue $(KeyOdiCard) {"Parameters",$(NoTitle),$(!REG_VT_MULTI_SZ),$(OdiParmList)}
FlushRegKey $(KeyOdiCard)
;
; flush the Odi_Modules key so that the card we just added will show up in the enum
;
FlushRegKey $(KeyOdiModules)
FlushRegKey $(KeyOdiLoad)
Debug-Output "Shelling to nwsubsinf "
Shell $(NwSubsInf) NwSetCardInstance $(KeyOdiLoad) $(KeyOdiModules) $(KeyOdiCard) $(CardInstanceName)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNX.INF: SetCardInstance failure "$($ShellCode)
Goto ShellCodeError
Endif
Set ErrorString = $($R0)
Ifstr(i) $(ErrorString) != NO_ERROR
Debug-Output "OEMNADNX.INF: SetCardInstance "$(ErrorString)
goto fatalregistry
Endif
Set OdiCardInstance = $($R1)
Debug-Output "OdiCardInstance = "$(OdiCardInstance)
CloseRegKey $(KeyOdiCard)
CloseRegKey $(KeyOdiModules)
FlushRegKey $(KeyOdiLoad)
CloseRegKey $(KeyOdiLoad)
;
; Update the card name and card instance in IpxSpxII to be the last card installed
;
Shell $(NwSubsInf) NwSetIpxCard $(CardInstanceName) $(OdiCardInstance)
Ifint $(ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNX.INF: SetIpxCard Shell failure "$($ShellCode)
goto ShellCodeError
Endif
Set ErrorString = $($R0)
Ifstr(i) $(ErrorString) != NO_ERROR
Debug-Output "OEMNADNX.INF: SetIpxCard "$(ErrorString)
goto fatalregistry
Endif
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
;
; TRAVIS: Put the ODILOAD adapter removal stuff here!
;
;
; Delete the Services\OdiLoad\Odi_Modules\xxxxxx #1 card instance and update
; IpxSpxII and ODINSUP if needed.
;
Shell $(NwSubsInf) NwRemoveAdapter $(!NTN_RegBase)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Shell Error NwRemoveAdapter "$($ShellCode)
Endif
;
; Increment the OdiLoad reference count so OdiLoad is not removed as a
; service.
;
Shell $(UtilityInf), IncrementRefCount, $(ProductKeyName)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: IncrementRefCount ShellCode error removeadapter "$($ShellCode)
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
Endif
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(DriverName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: RemoveHardwareComponent ShellCode error "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "OEMNADNX.INF: RegistryErrorIndex = "$(RegistryErrorIndex)
goto fatalregistry
endif
; Decrement the reference count so OdiLoad can be removed when all the
; ODI adapters have been removed.
;
Shell $(UtilityInf), DecrementRefCount, $(ProductKeyName)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: DecrementRefCount ShellCode error removeadapter "$($ShellCode)
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
Endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Split-String $(!NTN_Infname), "\", FilenameList
QueryListSize ListSize $(FilenameList)
set !UG_Filename = *($(FilenameList), $(ListSize))
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
else
;
; Error, cannot open net rules key
;
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
CloseRegKey $(ServiceKey)
else
;
; Error, cannot open network card key
;
goto fatalregistry
endif
endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
;
; Here's where we copy the files.
;
Debug-Output "INF: Successful; installing [InstallOption], DoCopy = "$(!DoCopy)
;
; Determine where to copy the files from
;
ifstr(i) $(!NTN_Origination) == "install"
Ifstr(i) $(!DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(!STF_SRCDIR)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_FAILED
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto installstep1
Endif
Set !STF_SRCDIR = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
goto installstep1
installstep1 = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(DriverName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: RemoveHardwareComponent ShellCode error "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADNS.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(FunctionTitle)
set STF_MB_TEXT = "Shell Code Error"
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
;
; Add product to registry
;
;
; Finish up
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "SMC SUPERDISK", TAGFILE = DISK.ID
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-ODI_SMC8000]
1,smc8000.lan , SIZE=20000
