STANDARD MICROSYSTEMS CORPORATION

         Microsoft Windows NT v3.5 and v3.51 NDIS v3.1 Driver
                      For Ethernet LAN Adapters

                         INSTALLATION GUIDE

  This software is licensed by SMC for use by its customers only.
       Copyright (c) 1995 Standard Microsystems Corporation.
                        All rights reserved.


This installation guide describes:

o  How to use EZStart to copy the Microsoft Windows NT v3.5
   and v3.51 NDIS spec 3.1 driver from the SuperDisk to
   your PC.

o  How to install the driver.

Note: This driver supports all 8216 (Ultra), 80xx (Elite), 
      80xx (PLUS), and 8416 (EtherEZ) Series ISA, 
      and Micro Channel Ethernet adapters.


COPYING THE DRIVER FILE USING EZSTART

1. Boot the computer to the DOS prompt.

2. Insert the SuperDisk into a floppy disk drive.

3. Change to the floppy drive where the SuperDisk is installed. 
    For example, if the disk is in drive A, type "A:" and press Enter.

4. From the DOS prompt, type "EZStart" (or "EZStart /t" for text 
    mode) and press Enter.

5. Select "Automatic" from the EZStart main screen to perform the
    Basic Adapter Test.

6. Select "Save" to save the selected configuration and continue.

7. At the Network Drivers and Documentation Selection screen,
    select the appropriate driver you want to install (make sure the
    selection you want is highlighted).  Then press the Enter key or
    select "OK".

8. At the Network Drivers and Documentation screen, the default
    destination directory and a list of files to be copied to the
    default directory are displayed.  To accept the default
    destination directory select "Copy Files".  Otherwise, enter a
    destination directory at the prompt and select "Copy Files".

9. Follow the prompts to continue the installation.

10. Remove the Superdisk from the floppy disk drive.

11. Select "Exit" to exit EZStart.

This completes the driver extraction  procedure using EZStart.


MULTIPLE SMC ETHERNET ADAPTERS

If you have more than one SMC adapter in your system, EZStart
will display each adapter with its configuration.  Select an
individual adapter by double-clicking on it, or by highlighting it
and either choosing "Select" or pressing the Enter key.  The Ezstart
Main screen will appear..


The EZStart default Destination Directory is A:\. Please make
a backup copy of your SuperDisk before EZStart copies files to the
SuperDisk to create an installation diskette.

Note:  If you change the Destination Directory, make sure that the
       DISK.ID file is in the root directory of the disk that you 
       are using, and that the OEMSETNT.INF, SMCNCDET.DLL,
       SMC8000.DLL, SMC8000.HLP and SMC8000N.SYS files
       reside in the root directory or a subdirectory on the disk
       you are using.


INSTALLING THE DRIVER

1. Boot your computer from Windows NT.

2. From the Program Manager's "Main" window, double-click on the 
   "Control Panel" icon.

3. Double-click on "Network". The Network Settings dialog box 
   appears.

4. Select "Add Adapter".

5. Select "<Other> Requires disk from manufacturer".

6. Select "Continue".

7. When prompted, insert the SuperDisk.

8. Type the Destination Directory where EZStart copied the
   driver files (for example, A:\WIN_NT). If you are not
   sure where the Destination Directory resides, look for
   the SMC8000N.SYS file. This file was one of the files
   copied by EZStart to the Destination Directory. When you
   find the directory where this file resides, you will have
   found the Destination Directory.

9. Select "OK".

10.  When the next dialog box appears, select your SMC adapter
        type followed by "OK".  

11. You will be presented with the Adapter Card Setup dialog box.
 
    NOTE: If you have previously selected the wrong adapter
          (step 10) Windows NT will fail to locate the adapter
          and you will be presented with default settings.

 12. Choose the IRQ Level, Memory Base address, and I/O Base
    address. Then, click on OK. 

13. When the next two dialog boxes appear, select "OK" for 
    each one.

14. When prompted, select Restart Now. 


NOTE:  When performing a Primary Installation (installing
       Windows NT for the first time), you will be prompted
       with a Network Adapter Card Detection dialog box. Select
       Do Not Detect to manually detect the EtherEZ and then
       select Continue.

       When installing a second adapter and prompted with the
       Network Adapter Card Detection dialog box, select
       Automatic Detection and then select Continue. 
 

In the unlikely event you encounter any device driver errors 
after Windows NT boots, check the event log in the 
Administrative Tools icon to see whether the error is related
to your network adapter.

This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788. 

SMC and Standard Microsystems are registered trademarks; and EtherEZ,
EtherCard Elite 16 Ultra, EtherCard Elite 16T Ultra, EtherCard Elite
16C Ultra, EliteSeries, EliteView, EZStart, SuperDisk, and UltraChip
are trademarks of Standard Microsystems Corporation.  Other product
and company names are registered trademarks or trademarks of their
respective holders.