STANDARD MICROSYSTEMS CORPORATION

                    FTP PC/TCP v1.2 Driver for OS/2
                       For Ethernet LAN Adapters

                          INSTALLATION GUIDE

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.


This installation guide describes:

o  How to use EZStart to copy the FP PC/TCP version 1.2 for OS/2 
   driver files from the SuperDisk to your PC.
 
o  How to prepare your PC's operating system so you can attach 
   to the network.
 
Note: This driver supports all 8216 (Ultra), 80xx (Elite), 
      80xx (PLUS), and 8416 (EtherEZ) Series ISA, EISA, and Micro
      Channel Ethernet adapters.


COPYING THE DRIVER FILES

From the Driver Installation screen, select 'Copy Files' to copy 
all the files used by this driver from the SuperDisk to the 
Destination Directory recommended by EZStart, or to a different 
directory that you specify.


PREPARING YOUR OPERATING SYSTEM

1. Use any text editor to modify your CONFIG.SYS file to include
   the following device statement for SMC8000.OS2:

   DEVICE=C:\PCTCP\DRV\SMC8000.OS2

2. Use any text editor to make the following changes to the 
   PROTOCOL.INI file created by FTP in the C:\PCTCP\DRV 
   subdirectory:

   [SOCKET]
       Drivername = $socket
       Bindings = SMC8000

   [SMC8000]
       Drivername = SMC8000$


The PC/TCP setup program, TCPINST, is located on the PC/TCP Install
Disk 1. The chapter entitled "Installing PC/TCP" in the PC/TCP 1.2
Installation Guide contains complete instructions for using TCPINST.


This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788. 


SMC and Standard Microsystems are registered trademarks; and EtherEZ,
EtherCard Elite 16 Ultra, EtherCard Elite 16T Ultra, EtherCard Elite
16C Ultra, EliteSeries, EZStart, and SuperDisk are trademarks of 
Standard Microsystems Corporation.  Other product and company names 
are registered trademarks or trademarks of their respective holders.