STANDARD MICROSYSTEMS CORPORATION

         Artisoft's LANtastic Network Software v6.0 Driver
                       For Ethernet LAN Adapters

                          INSTALLATION GUIDE

   This software is licensed by SMC for use by its customers only.
        Copyright (c) 1994 Standard Microsystems Corporation.
                         All rights reserved.


This installation guide describes:

o  How to use EZStart to copy the driver files for Artisoft's 
   LANtastic Network Software version 6.0 from the SuperDisk to 
   your PC.

o  How to install the driver files for Artisoft's LANtastic
   Network Software version 6.0 

o  Sample file contents after LANtastic Network Software 6.0 is
   installed.


COPYING THE DRIVER FILES

From the EZStart Driver Installation screen, select 'Copy Files' to
copy all of the files used by Artisoft's LANtastic Network Software
version 6.0 driver from the SuperDisk to the Destination Directory 
recommended by EZStart, or to a different directory that you specify.
The EZStart default Destination Directory is A:\

Make a backup copy of your SuperDisk before EZStart copies files to 
the SuperDisk.


INSTALLING THE DRIVER FILES

The following section describes how to install Artisoft's LANtastic
Network Software version 6.0 along with the SMC driver file. If you
already have Artisoft's LANtastic Network Software version 6.0
installed and only want to install the SMC driver, proceed to
"Installing the SMC Driver Only".


Installing Artisoft's LANtastic Network Software version 6.0 and
the SMC Driver

The following procedure describes how to install Artisoft's LANtastic
Network Software version 6.0 along with the driver files. This 
procedure is designed to expedite the driver installation. 

1. Edit the PROTOCOL.INI file you copied from EZStart so it
   resembles the following:

   [SMC8000_NIF]
       Drivername = SMC8000$

2. Insert Artisoft's LANtastic Network Software version 6.0
   Disk 1 of 4 in your computer's disk drive.

3. Type:  a:\install

4. Press the Enter key to start the setup procedure.

5. Follow the on-screen prompts.

6. When the Select Network Adapter Window prompts you for a LAN
   driver, select "NDIS Support for Network Adapters" followed 
   by "OK".

7. When you are prompted for the manufacturer's driver diskette,
   insert the SuperDisk in your computer's disk drive. Then 
   specify the path where the modified PROTOCOL.INI resides on the 
   SuperDisk. 

Note: If you used EZStart to copy the driver to a different 
      Destination Directory, specify that directory's path in step 
      7. If that directory resides on a diskette other than the 
      SuperDisk, insert that diskette in your computer's disk 
      drive.

8. Select "OK".

9. Proceed with the rest of the LANtastic Network Software
   version 6.0 driver installation procedure.

10. At the end of the installation procedure, reboot your computer.


Installing the SMC Driver Only

The following procedure describes how to install the SMC driver
and assumes that Artisoft's LANtastic Network Software version 6.0
is already installed.

If you are using Artisoft's LANtastic Network Software version 6.0
and want to install the SMC driver:

1.  Double-click on the Control Panel icon in the Main window.

2.  Double-click on the Network icon.

3.  Select the Adapters icon in the Options area.

4.  Select the adapter you want to remove followed by "Remove".

5.  When a message asks whether you are sure you want to remove 
    the adapter, select "Yes".

6.  Select "Add". The Install Network Adapter dialog box appears.

7.  Select the SMC adapter you want to install followed by "OK".
    The Install Driver dialog box appears.

8.  Type the path where the driver resides (for example, A:\)
    and select "OK". The Unlisted or Updated Network Adapter
    dialog box appears.

9.  Select "OK" when the next two dialog boxes appear.

10. Select "Close". The Network Settings dialog box appears.

11. Select "OK". You will be prompted whether you want to accept 
    all the options you selected and restart your computer or
    return to DOS. Restart your computer so your options can take 
    effect.


LANtastic NETWORK SOFTWARE v6.0 DRIVER FILES

Included on the SuperDisk are the sample files, CONFIG.SYS, PROTOCOL.INI
AUTOEXEC,BAT, and STARTNET.BAT generated during the LANtastic Network 
Software version 6.0 installation.


This commercial computer software and documentation is provided with
RESTRICTED RIGHTS.  Use, duplication, or disclosure by the
Government is subject to restrictions set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013, or subparagraphs (c) (1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at
FAR 52.227-19, or Alternate III of the Rights in Data -- General
clause at FAR 52.227-14, as applicable.  The manufacturer /
subcontractor is Standard Microsystems Corporation,   80 Arkay Drive,
Hauppauge,  NY    11788. 


SMC and Standard Microsystems are registered trademarks; and EtherEZ,
EtherCard Elite 16 Ultra, EtherCard Elite 16T Ultra, EtherCard Elite
16C Ultra, EliteSeries, EZStart, and SuperDisk are trademarks of 
Standard Microsystems Corporation.  Other product and company names 
are registered trademarks or trademarks of their respective holders.